Central Pneumatic Impact Set 33567 Users Manual

IMPACT SET 33567 33567

2015-02-03

: Central-Pneumatic Central-Pneumatic-Impact-Set-33567-Users-Manual-467699 central-pneumatic-impact-set-33567-users-manual-467699 central-pneumatic pdf

Open the PDF directly: View PDF PDF.
Page Count: 19

Scroll down to view the document on your mobile browser.
3491 Mission Oaks Blvd. / Camarillo, CA 93011Copyright © 1997 by Harbor Freight Tools®.  All rights reserved.No portion of this manual or any artwork contained herein may be reproduced in anyshape or form without the express written consent of Harbor Freight Tools.For technical questions and replacement parts, please call 1-800-444-3353.®Assembly and Operating InstructionsCOMBO RATCHET/IMPACT SET®REVISED 12/02 05/04
SPECIFICATIONSRATCHET WRENCH —Average Air Consumption 4 CFMRecommended Air Pressure 90 PSIAir Inlet ¼” NPTFree Speed 150 RPMMaximum Torque (ft. lbs.) 45IMPACT WRENCH —Bolt Capacity 1/2"Speed 7000 RPMAir Inlet ¼” NPTSockets 7/16" – 1"Maximum Torque (ft. lbs.) 230SAVE THIS MANUALYou will need the manual for the safety warnings and cautions, assembly instructions, operatingprocedures, maintenance procedures, trouble shooting, parts list, and diagram. Keep yourinvoice with this manual. Write the invoice number on the inside of the front cover. Keepboth this manual and your invoice in a safe, dry place for future reference.SAFETY WARNING & CAUTIONSWARNING: When using pneumatic equipment, basic safety precautions should always befollowed to reduce the risk of personal injury and hazards due to over pressurization. READ ALLINSTRUCTIONS BEFORE USING THIS TOOL!1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries.2. OBSERVE WORK AREA CONDITIONS. Do not use tools in damp, wet, or poorly lit loca-tions. Don’t expose to rain. Keep work area well lit. Do not use electrically powered aircompressors in the presence of flammable gases or liquids.3. KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let themhandle machines, tools, or hoses. Keep others a safe distance from tool while tool is inoperation as accidental actuation may occur, possibly causing injury.4. STORE IDLE EQUIPMENT. When not in use, tools must be locked up in a dry location toinhibit rust. Always lock up tools and keep out of reach of children.5. DO NOT FORCE THE TOOL. It will do the job better and more safely at the rate for which itwas intended. Do not use inappropriate attachments in an attempt to exceed the tool’scapacities.Page #2 -- SKU: 33567 REV 12/02 REV 05/04For technical questions, please call 1-800-444-3353.

Navigation menu