Central Pneumatic Nail Gun 40116 Users Manual

Central Pneumatic Air Compressor Nail Gun 40116 40116

2015-02-03

: Central-Pneumatic Central-Pneumatic-Nail-Gun-40116-Users-Manual-467708 central-pneumatic-nail-gun-40116-users-manual-467708 central-pneumatic pdf

Open the PDF directly: View PDF PDF.
Page Count: 11

Scroll down to view the document on your mobile browser.
ModelAIR NAILER/STAPLER2-IN-1 KIT 97524 40116ASSEMBLY and OPERATING INSTRUCTIONSDiagrams within this manual may not be drawn proportionally.Due to continuing improvements, actual product may differ slightly from the product described herein.Distributed exclusively by Harbor Freight Tools®.3491 Mission Oaks Blvd., Camarillo, CA 93011Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.For technical questions or replacement parts, please call 1-800-444-3353.
SKU 97524 40116 Page 2For technical questions, please call 1-800-444-3353.SpecicationsAir Inlet 1/4”- 18 NPTRecommended Air Pressure 60 - 100 PSI, 100 PSI Max.Magazine Capacity 100 Nails or 80 StaplesSafety Feature Single Sequential Safety Trip MechanismNail Size .039-.042” Shank (18 Gauge),5/8” - 2” LStaple Size 1/4” Crown, .039-.042” Shank (18 Gauge), 1/2” - 1 1/2” LAccessories: Oil Dropper, 2 Wrenches, 1 Coupler PlugNote: Performance of the compressor (if powered by line voltage) may vary depending on variations in local line voltage. Extension cord usage may also affect tool performance.Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.Safety Warnings and PrecautionsWARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this tool!1. Keep work area clean. Cluttered areas invite injuries.2. Observe work area conditions. Do not use machines or power tools in damp or wet locations. Do not expose to rain. Keep work area well lit. Do not use electrically powered tools in the presence of ammable gases or liquids.3. Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, extension cords, or air hoses.4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.5. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended.6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair.7. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines or air hoses.

Navigation menu