Centrica Hive RP11 Wireless Repeater User Manual Alarm Sensor

Download:
Mirror Download [FCC.gov]
Document ID	1713978
Application ID	JWo0FmxQ1wtsSPV2XEkP/w==
Document Description	device pairing
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	79.2kB (990030 bits)
Date Submitted	2012-06-03 00:00:00
Date Available	2012-06-04 00:00:00
Creation Date	2012-02-28 10:22:32
Producing Software	Microsoft® Office PowerPoint® 2007
Document Lastmod	2012-02-28 10:22:32
Document Title	Alarm Sensor
Document Creator	Microsoft® Office PowerPoint® 2007
Document Author:	Matt Stratfold

Iris Smart Button
Squeeze sides together then hinge
open.
Repeat this for all buttons then click ‘ok’
Insert battery checking correct
orientation.
Replace cover. The button will flash
until it has been added to your system.
Iris Motion Sensor
Need to use
v2 sensor
images
Squeeze sides together then hinge
open.
Insert battery checking correct
orientation.
Repeat this for all motions sensors then click ‘ok’
Replace cover. The sensor will flash
until it has been added to your system.
Iris Wireless Video Camera
Power
Need to use
new camera
image
1.
network
Connect the camera to a network port on your router using
the supplied cable.
Repeat this for all cameras then click ‘ok’.
2.
Plug the camera into a power socket using the supplied
cable and adapter and turn on.
Blue Line Optical Electricity Meter Reader
PROCESS TBD
Down load the driver
Connect the gateway
Start the install
Add the reader
Pair reader and gateway
Pair gateway and hub
Iris Door/Window/Cabinet Sensor
Squeeze sides together then hinge
open.
Insert battery checking correct
orientation.
Replace cover. The sensor will flash
until it has been added to your system.
Iris Smart Key Fob
Lever open the key fob using the
supplied tool.
Repeat this for all key fobs then click ‘ok’
Insert battery checking correct
orientation.
Slide the thin end together then
squeeze closed. Key fob will flash until
it has been added to your system.
Iris Smart Plug
Use the US
smart plug here
And a US socket
2. The light on the front of the Smart Plug will flash until it has
Plug the Smart Plug into an outlet that is no more than 10
foot from your smart hub.
Repeat this for all smart plugs then click ‘ok’
been added to your system.
Iris Smart Keypad
Remove the back of the keypad as
shown
Repeat this for all keypads then click ‘ok’
Insert the batteries checking correct
orientation.
The ‘off’ light will flash until it has
been added to your system.
RTOA Smart Thermostat
Install the thermostat as instructed in
the printed manual.
TBD
[…] will flash until it has been added
to your system.
GE On/Off Light Switch
Install the switch as instructed in the printed manual.
2.
To include your light switch press the top of the rocker
switch. The smart hub will beep when it has been found.
GE Dimmer Light Switch
Install the switch as instructed in the printed manual.
2.
To include your dimmer switch press the top of the rocker
switch. The smart hub will beep when it has been found.
GE Outdoor Module
Show plugged into
a power outlet
Plug the Outdoor module into an outlet that is no more than
10 foot from your Smart Hub.
2.
To include your outdoor module press the button on the
front of the module. The smart hub will beep when it has
been found.
GE Duplex Receptacle
Install the outlet as instructed in the printed manual.
2.
To include your duplex receptacle press the button on the
front of the receptacle. The smart hub will beep when it has
been found.
GE 3 Way Switch
Install the switch as instructed in the printed manual.
2.
To include your 3 way switch press the top of the rocker
switch. The smart hub will beep when it has been found.
Schlage Deadbolt Doorlock - Nickel
Follow the printed instructions to
install your Smart Deadbolt into your
door. Note the 6 digit program code
from the sticker on the lock.
Enter the six digit program code.
Wait for the Schlage button to flash
and beep three times.
Press the Schlage button and then
the number 0. The hub will beep
once it has found the lock.
Schlage Level Doorlock - Nickel
Follow the printed instructions to
install your Smart Deadbolt into your
door. Note the 6 digit program code
from the sticker on the lock.
Enter the six digit program code.
Wait for the Schlage button to flash
and beep three times.
Press the Schlage button and then
the number 0. The hub will beep
once it has found the lock.
Iris Range Extender
Plug the range extender into an outlet that is no more than
10 foot from your smart hub.
2.
The light on the range extender will flash for a while until it
is added to your system. This should take no more than 5
minutes.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 17
Language                        : en-GB
Tagged PDF                      : Yes
Title                           : Alarm Sensor
Author                          : Matt Stratfold
Create Date                     : 2012:02:28 10:22:32+00:00
Modify Date                     : 2012:02:28 10:22:32+00:00
Producer                        : Microsoft® Office PowerPoint® 2007
Creator                         : Microsoft® Office PowerPoint® 2007

EXIF Metadata provided by EXIF.tools