Centrica Hive SH12 Alertme Wireless Starter Hub 1-2 User Manual User Guide PRINTED

AlertMe.com Ltd Alertme Wireless Starter Hub 1-2 User Guide PRINTED

Contents

Manual Printed

Download: Centrica Hive SH12 Alertme Wireless Starter Hub 1-2 User Manual User Guide PRINTED
Mirror Download [FCC.gov]Centrica Hive SH12 Alertme Wireless Starter Hub 1-2 User Manual User Guide PRINTED
Document ID1030102
Application IDMKGTJ5z+gIgl6Z0BAizjng==
Document DescriptionManual Printed
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize20.3kB (253691 bits)
Date Submitted2008-11-13 00:00:00
Date Available2008-11-13 00:00:00
Creation Date2008-10-27 16:03:35
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2008-10-27 16:03:35
Document TitleUser_Guide_PRINTED.pdf
Document CreatorPScript5.dll Version 5.2.2
Document Author: Administrator

Side 1 without tab:Layout 1
7/12/07
13:50
Page 1
AlertMe in your home
Intelligent home security
The
Emergency Alarm
Quick start guide
The Emergency Alarm service uses Alarm
The Intruder Alarm
The Intruder alarm monitors the Motion Sensors and
Detectors (x2) to listen to your existing smoke alarms
(or carbon monoxide alarms, or any other home
alarms which make a loud siren or beeping). With an
Door/Window Sensors when you are away from home and
alerts you if anything happens.
Alarm Detector installed next to
each alarm in your home,
your alarms become part
Door/Window Sensors (x3) inform your AlertMe system whether doors
or windows are open or closed. Each sensor has two parts, and you stick
one on the door or window and one on the frame, so
that they are close together when the door or window
is shut. These are useful for checking that doors and
windows are closed when you leave home.
Motion Sensors (x2) watch for people moving around
in a room or area of your home. They are
best positioned towards the top of a
wall, pointing out into the room.
They are the best way of
detecting any intruder in
your home.
The Fun Stuff
of the AlertMe system,
and you will be alerted
if any of them go off.
As well as the serious home safety and security
service offered by AlertMe you also get a button and a
lamp in your kit. New features using these accessories will be
released over time. Check the website to find out what is available
at the moment!
The Lamp (x1) makes the AlertMe wireless
network in your home even more reliable. In
addition, it’s a funky, multi-coloured light which
can be used for all kinds of things.
The Button (x1) is an internet-connected button,
which like the Lamp, can be used in all
kinds of ways. Maybe you’d like to
use your Button as a doorbell or
panic
button,
or
something else...
The Hub
The hub (x 1) is the heart of AlertMe in
your home. It connects to AlertMe 24/7 via
your
broadband
(with
backup GPRS link). If your
mains power goes out, it
keeps working on backup
batteries. It checks the
Accessories in your home
are working at all times
and lets you know, via our
The Keyfobs
Each Keyfob (x 3) has two buttons: Home
(the big one) and Away (the little one), to blip
your home when you leave and return
home, just like blipping a car. This
controls the Intruder Alarm (letting it
know when to secure your home),
and can also be used to cancel the
Emergency Alarm if it goes off
because you’ve burnt the toast.
secure servers, if anything
happens.
AlertMe also uses Keyfobs to keep track of who is
at home, and who is out. You can always
check who is at home using the
secure website.
Please turn over for instructions on how to install your alertme system.
You can also visit http://help.alertme.com
Side 2 without tab:Layout 1
7/12/07
13:43
Page 1
Unpack your kit. You will also need access
to your broadband router and computer
Plug your hub into your broadband router
and follow the web instructions at alertme.com
Connect your hub to your broadband router with the ethernet cable
provided. Connect it to mains power using the power cable provided.
Plug in the lamp and insert batteries into the
other accessories
Squeeze the tabs on the side of the accessory to open
Insert the keyfob tool into the slot by the keyring and slide
the top of the accessory back.
/2
Please leave at least 1 1/2
hours for installation
Test your AlertMe system
Following the web instructions, place
accessories around your home
Check the keyfob arms and disarms your system
Attach sticky pads to your accessories
Wave your hand in front of the motion sensor.
Distance between alarm and sensor - max 5cm
Hold for 5
seconds
Make sure the indentations on both sensors are facing
each other
Some accessories may require 2 sticky pads
Open windows and doors to check your sensors.
Once the battery is in place, carefully push together the
two sides of the accessory
Distance between sensors - max 5mm
Point me so the only movement I see
is people, not pets!
To remove the sticky pads, pull the exposed tabs away
while holding the accessory firmly in place.
Press for 5
seconds

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:869ac558-fae0-43ed-af98-dac26eb51f81
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2008:10:27 16:03:35Z
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:10:27 16:03:35Z
Document ID                     : uuid:0508630f-3605-44e4-8da2-5b56c8340c16
Format                          : application/pdf
Title                           : User_Guide_PRINTED.pdf
Creator                         : Administrator
Author                          : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: WJHSH12

Navigation menu