Chainway Information Technology C72 Mobile Data Terminal User Manual Mobile Data Terminal

Shenzhen Chainway Information Technology Co., Ltd. Mobile Data Terminal Mobile Data Terminal

Users Manual

Download: Chainway Information Technology C72 Mobile Data Terminal User Manual Mobile Data Terminal
Mirror Download [FCC.gov]Chainway Information Technology C72 Mobile Data Terminal User Manual Mobile Data Terminal
Document ID3868420
Application ID5lKzXhiiIM/uL4hoXd4HZg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize72.72kB (909060 bits)
Date Submitted2018-05-30 00:00:00
Date Available2018-05-31 00:00:00
Creation Date2018-05-23 15:16:15
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2018-05-23 15:16:20
Document TitleMobile Data Terminal
Document CreatorAcrobat PDFMaker 9.1 Word 版
Document Author: LeoQuangChi

SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO.,LTD
Mobile Data Terminal
C72 User Manual
Contents
Statement........................................................................................................................2
Chapter 1 Product Intro ...................................................................................................3
1.1
Intro ...................................................................................................................3
1.2
Precaution before using battery ......................................................................... 4
1.3
Charger .............................................................................................................5
1.4
Notes .................................................................................................................6
Chapter 2 Installation instructions....................................................................................7
2.1 Appearance ...........................................................................................................7
2.2 Install Micro SD and SIM cards ..............................................................................9
2.3 Battery charge ..................................................................................................... 10
2.4 Buttons and function area display ........................................................................ 11
Chapter 3 Call function .................................................................................................. 12
3.1 Calling numbers ................................................................................................... 12
3.2 Contacts .............................................................................................................. 12
3.3 SMS and MMS..................................................................................................... 12
Chapter 4 Barcode reader-writer ................................................................................... 13
Chapter 5 Infrared read-write function ........................................................................... 15
Chapter 6 RFID reader .................................................................................................. 16
6.1 UHF ..................................................................................................................... 16
Chapter 7 Other functions ............................................................................................. 17
7.1 PING tool ............................................................................................................. 17
7.2 Bluetooth ............................................................................................................. 18
7.3 GPS ..................................................................................................................... 19
7.4 Volume setup ....................................................................................................... 20
7.5 Sensor .................................................................................................................21
7.6 Keyboard ............................................................................................................. 22
7.7 Network ............................................................................................................... 23
7.8 Keyboard emulator (optional) ............................................................................... 24
Chapter 8 Device characteristic ..................................................................................... 25
Statement
2013 by ShenZhen Chainway Information Technology Co., Ltd. All rights reserved.
No part of this publication may be reproduced or used in any form, or by any electrical or
mechanical means, without permission written from Chainway. This includes electronic
or mechanical means, such as photocopying, recording, or information storage and
retrieval systems. The material in this manual is subject to change without notice.
The software is provided strictly on an “as is” basis. All software, including firmware,
furnished to the user is on a licensed basis. Chainway grants to the user a nontransferable and non-exclusive license to use each software or firmware program
delivered hereunder (licensed program). Except as noted below, such license may not
be assigned, sublicensed, or otherwise transferred by the user without prior written
consent of Chainway. No right to copy a licensed program in whole or in part is granted,
except as permitted under copyright law. The user shall not modify, merge, or
incorporate any form or portion of a licensed program with other program material,
create a derivative work from a licensed program, or use a licensed program in a
network without written permission from Chainway.
Chainway reserves the right to make changes to any software or product to improve
reliability, function, or design.
Chainway does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under
any Chainway intellectual property rights. An implied license only exists for equipment,
circuits, and subsystems contained in Chainway products.
Chapter 1 Product Intro
1.1 Intro
C72 device is a smart mobile PDA that integrated with various features such as wireless
communication, data acquisition, wireless transmission, data processing and UHF
scanning etc. It is configured with Andriod 6.0 OS and it possesses high reliability and
expansibility. With a set of advanced data acquisition options, C72 can be operated in
various industries to acquire precise and abundant datum automatically. Meanwhile, the
device can match the options with staffs accordingly. The corporation which deployed
C72 will realize the deployment work is simple and maintenance work will be remarkably
decreased.
C72 is highly rugged, compact and durable. With IP65 water and dust proof capability,
the device has met IEC sealing standard. Therefore, it can be operated by staffs such as
railway inspector, road toll operator, vehicle inspector, delivery postman, power supply
inspector, storage administrator, financial & insurance, police officers, security tracing
etc. Wherever your staff’ locations are, C72 can remain its connectivity with the system
to make sure business in high-effective operating.
C72 mobile data terminal adopted 4G LTE technology to realize multipath
communication and calling function for field work, data exchange efficiency has been
enhanced simultaneously. Therefore, C72 will bring the largest investment return for
enterprises.
1.2 Precaution before using battery
 Do not leave battery unused for long time, no matter it is in device or inventory. If
battery has been used for 6 months already, it should be check for charging
function or it should be disposed correctly.
 The lifespan of Li-ion battery is around 2 to 3 years, it can be circularly charged
for 300 to 500 times. (One full battery charge period means completely charged
and completely discharged.)
 When Li-ion battery is not in used, it will continue discharge slowly. Therefore,
battery charging status should be checked frequently and take reference of the
related battery charging information on the manuals.
 Observe and record the information of a new unused and non-fully charged
battery. On the basis of operating time of new battery and compare with a battery
that has been used for long time. According to product configuration and
application program, the operating time of battery would be different.
 Check battery charging status at regular intervals.
 When battery operating time drops below about 80%, charging time will be
increased remarkably.
 If a battery is stored or otherwise unused for an extended period, be sure to
follow the storage instructions in this document. If you do not follow the
instructions, and the battery has no charge remaining when you check it,
consider it to be damaged. Do not attempt to recharge it or to use it. Replace it
with a new battery.
 Store the battery at temperatures between 5 °C and 20 °C (41 °F and 68 °F).
1.3 Charger
The charger type is GME10D-050200FGu, output voltage/current is 5V DC/2A. The plug
considered as disconnect device of adapter.
1.4 Notes
Note: Using the incorrect type battery has danger of explosion.
Please dispose the used battery according to instructions.
Note: Due to the used enclosure material, the product shall only be connected to a USB
Interface of version 2.0 or higher. The connection to so called power USB is
prohibited.
Note: The adapter shall be installed near the equipment and shall be easily accessible.
Note: The suitable temperature for the product and accessories is 0-10℃ to 50℃.
Note: CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Chapter 2 Installation instructions
2.1 Appearance
Buttons instruction
Button
1.Power
Side
button
Main
button
2.Function key
Description
Located on left side, press to ON/OFF device.
Located on left side, its function can be defined by software.
4.Menu
Scanning button located on both sides. There are two scanning
buttons.
Display main menu.
5.Home
Touch it back to main screen.
6.Enter
Press to confirm current selection.
7.Backspace
Return to last step to setup.
3.SCAN
2.2 Install Micro SD and SIM cards
The cards sockets are showing as follows:
2.3 Battery charge
By using USB Type-C contact, the original adaptor should be used for charging the
device. Make sure not to use other adaptors to charge the device.
10
2.4 Buttons and function area display
C72 has 4 side buttons, 4 main buttons and trigger on pistol, UHF scanning area, 2D
scanning module, HD camera and flashlight locate on the top.
11
Chapter 3 Call function
3.1 Calling numbers
1. Click icon
2. Click number key to input phone numbers.
3. Click icon
to call.
4. Click icon
to end call.
3.2 Contacts
1. Click contacts to open contacts list.
2. Click icon
to add new contacts.
3. Click icon
to import/export contacts.
3.3 SMS and MMS
1. Click
2. Click
3. Click
4. Click
to open message window.
to input message receiver and contents.
to send out messages.
to add attachment pictures and videos.
12
Chapter 4 Barcode reader-writer
1. In App Center, to open 2D barcode scan test.
2. Press “SCAN” button or click scan key to start scanning, the
parameter “Auto interval” can be adjusted.
Caution: Please scan codes in correct way otherwise the
scanning will be failed.
1D barcode:
2D code:
13
Max. radiant power: 0.6mW
Wave length: 655nM
IEC 60825-1 (Ed.2.0).
21CFR 1040.10 and 1040.11 standard.
14
Chapter 5 Infrared read-write function
1. Open infrared function in App Center.
2. Click button “Open” to start infrared scanning function. Click
“LED” for infrared scanning aim assist. Depending on different
application status to compile different commands to realize
infrared read and write function.
15
Chapter 6 RFID reader
6.1 UHF
Click App Center, open “UHF” to read and write, kill and lock UHF tag.
16
Chapter 7 Other functions
7.1 PING tool
1. Open “PING” in App Center.
2. Setup PING parameter and select external/internal address.
17
7.2 Bluetooth
1. Open “BT Printer” in App Center.
2. In the list of detected devices, click the device that you want to
pair.
3. Select printer and click “Print” to start printing contents.
18
7.3 GPS
1. Click “GPS” in App Center to open GPS test.
2. Setup GPS parameters to access GPS information.
19
7.4 Volume setup
1. Click “Volume” in App Center.
2. Setup volume by requirements.
20
7.5 Sensor
1. Click “Sensor” in App Center.
2. Setup the sensor by requirements.
21
7.6 Keyboard
1. Click “Keyboard” in App Center.
2. Setup and test the main value of the device.
22
7.7 Network
1. Click “Network” in App Center.
2. Test WIFI/Mobile signal by requirements.
23
7.8 Keyboard emulator (optional)
The keyboard emulator can be used in multiple operating background and output
formats directly. And it includes Prefix/Suffix/Enter/TAB.
Please check Keyboard emulator manual for more details.
24
Chapter 8 Device characteristic
Physical characteristics
Size
Weight
Display
Touch panel
Battery
Expansion
Expansion Slot
Audio
Camera
164.2mm*78.8mm*17mm
<654g(battery included)
5.2 inch,IPS FHD 1920*1080P
4 main keyboards, 1 power button, 2 scan buttons, 1 multifunction button
Li-ion, rechargeable, 8000mAh
Supports up to 32 GB Micro SD card
1 slot for SIM card, 1 slot for SIM or TF card
speaker, 2 microphones, voice call
13MP autofocus camera with flashlight
Performance
CPU
OS
RAM
Communication
Interface
ROM
Max.expansion
Cortex-A53 1.3GHz Quadcore
Andriod 6.0
2GB RAM
USB2.0,Type-C,OTG
16GB
Supports up to 32 GB Micro SD card
User environment
Operating temp.
Storage Temp.
Humidity
Sealing
Drop specification
-10℃ to 50℃
-40℃ to 70℃
5%RH - 95%RH non condensing
IP65, IEC sealing standard
Multiple 1.8m/4.0ft drops to the concrete
25
Communication
WAN
WLAN
WPAN
2G: 850/1900MHz
3G: 850/1700/1900MHz
4G: B2, B4, B7, B12, B17
IEEE802.11 a/b/g/n, 2.4G/5G dual-band, internal antenna
Bluetooth 4.0
Data collection
Barcode scanning
RFID
2D scanning engine(Zebra SE4710/Zebra
SE4750MR/Honeywell N6603)
NFC 13.56Mhz
RFID 902-928MHz
Developing Environment
SDK
Language
Develop
Chainway software develop kit
Java
Eclipse/Android Studio
26
FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications or changes to this equipment. Such modifications or changes could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐Consult the dealer or an experienced radio/TV technician for help.
During SAR testing, this device is set to transmit at its highest certified power
level in all tested frequency bands, and placed in positions that simulate RF
exposure in usage near the body with the separation of 10 mm. Although the
SAR is determined at the highest certified power level, the actual SAR level of
the while operating can be well below the maximum value. This is because
the device is designed to operate at multiple power levels so as to use only
the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
FCC Radiation Exposure Statement
. This device was tested for typical body‐worn operations with the back of the handset kept
10mm from the body.
27
To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10
mm separation distance between the user's body and the back of the handset. The use of belt clips,
holsters and similar accessories should not contain metallic components in its assembly. The use
of accessories that do not satisfy these requirements may not comply with FCC RF exposure
requirements, and should be avoided.
RF Exposure Information(SAR)
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device
Types C72 (FCC ID: 2AC6AC72) has also been tested against this SAR limit.
The highest SAR value reported under this standard during product certification for use when
properly worn on the body is1.168 W/kg and for head is 0.24 W/kg.
28

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : LeoQuangChi
Company                         : SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO.,LTD
Create Date                     : 2018:05:23 15:16:15+08:00
Modify Date                     : 2018:05:23 15:16:20+08:00
Source Modified                 : D:20180523071603
Subject                         : C72 User Manual
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2018:05:23 15:16:20+08:00
Creator Tool                    : Acrobat PDFMaker 9.1 Word 版
Document ID                     : uuid:f307d1b4-040b-4934-b847-b0afbc73b211
Instance ID                     : uuid:b7dbcb18-fd0e-4914-af6c-2f924e47acf8
Format                          : application/pdf
Title                           : Mobile Data Terminal
Description                     : C72 User Manual
Creator                         : LeoQuangChi
Producer                        : Adobe PDF Library 9.0
Headline                        : C72 User Manual
Page Layout                     : OneColumn
Page Count                      : 29
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AC6AC72

Navigation menu