Chamberlain Group The 1304 Remote controlled receiver User Manual operating instructions
Chamberlain Group Inc, The Remote controlled receiver operating instructions
operating instructions
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 47938 |
| Application ID | Vu0UK8oyB2Io6CyCmpzv9Q== |
| Document Description | operating instructions |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 72.68kB (908507 bits) |
| Date Submitted | 1999-07-14 00:00:00 |
| Date Available | 1999-09-22 00:00:00 |
| Creation Date | 1999-07-15 01:02:14 |
| Producing Software | Photoshop PDF Plug-in 1.0 |
| Document Lastmod | 1999-07-15 01:02:49 |
| Document Title | operating instructions |
| Document Creator | Photoshop PDF Plug-in 1.0 |
OPERATING INSTRUCTIONS mpomm upwn vg non Meme save _——__—-—————————-. The simple, reliable way to protect your vehicle. We've combined the latest in vehicle security technolo— gy With the premium performance and long life of the DieHard" Gold to bring you the most advanced battery available. The DieHard Gold Anti»Theft Battery works like any other battery while offering you state—of-the—an vehicle security. No complicated wiring is required to install it. By using RF controls and a built—in micrt} processor, the battery can immobilize your vehicle when you’re not driving to prevent theft. Plus, the DieHard Anti-Thelt technology offers exclusive power—saving aenefits to extend battery lite and prevent accidental discharge. zollow these simple installation and programming nstructionsv And you‘ll enjoy the security, salety and iependability of the DieHard Gold Anti-Theft system for he lite oi the battery, Battery Security Module Programming Button BIN Label Remote control fob One-Step Installation Your battery 15 shlpped from the factory in a sleep mode Vou must use an RF remote control transmitter key fob that comes with your battery to activate the bat» tery and security system (Your DieHard Arm—Theft Security System can also be programmed With compat— ible Craftsman' garage door remotes) Refer to the 4diglt Battery ldentlfication Number (BIN) code on the battery label The BIN IS your personal secu- rity code. For your securlty, remove this label and apply to the perlorated card in this guide. Keep this card With you in case you lose your remote or need to reprogram the system, Do not keep your BlN code label in the car or leave on the battery. , To program: / N; Vour remote control lob has 3 buttons “ You can use elther of these buttons to pro- l gram your battery security system in Press the selected button on the remote. then press the program button on the battery security module to enter each dlgrt of your law code by count- ing the beeps. For example, for a BlN code that is 1234, you would press and hold the program button until you hear i beep, release; press it for Z beeps, release, press rt for 3 beeps, release, press rt for 4 beeps, release The battery erI make 3 rapid beeps to acknowledge a valid entry. The security system on your battery rs actr- vated and ready to use if the entry isn't valrd, you‘ll hear a series of raprd beeps after 3!) seconds. Then you should rertry programming the system following the rnstructrons above. I! the entry is strIl not valid after three programming tries, call 17800-xxx-xxxx Once your battery is aetivated, rt's virtually impossible to overrrde Without the BIN code. The system uses patent- ed, "rolling code” technology that changes each trrne the system is activated to deter electronic "code grab— brng" equipment Using The Anti-Theft Immobilizer Function Activating the system. To activate the anti—theft rmmobrlrzing function, Simply press the button on your remote once. The remote con» trol range is approximately 301m. Vou'll hear 1 beep signaling that the system is active There’s a 30»second delay before the system is armed. This accommodates time-delays for your automobiles accessories, like dome lights, headlights, etc. If there's an attempt to start your vehicle while the sys- tem is armed, the battery will automatically cut off power to the starting system. The engine wrll turn over, but stop immediately. If three attempts are made to start the engine, the battery cuts off power to all electrical systems. Tamper resistant If someone tries to remove or damage the module or damage, the battery W4” not operate. While the securi— ty system Is in the armed mode, it is impossible to jump start the battew. Disarming the system. when you return to your vehicle, press the remote once The battery thI beep twice signaling that the security system is drsarmed and the battery is operational This Will also return power to all accessories if the vehicle's electrical system has been shut down The engine is ready to start (In the case of a total electrical system shut down, you may have to re-set clock and radio sta— tion channel memories.) in normal operation, the secur rity system provides power to your vehicle accessories while it’s in the immobilizer function Driver Entry Warning If you open the driver’s side door before disarming the system, you'll hear a series of beeps warning you that the security system is still active, Simply press the button on the remote to disarm. vibration Sensor The security module also contains a vibration sensor. It Will beep once when the system IS armed and the vehi— cle is subject to vibration. Emergency Override Instructions (Important Remember to carry the wallet card that has your BlN code ) Il you lose your remote control fob, you can manually override the battery's immobilizing function by iollow- ing these steps: Press and hold the program button on the battery. Count the beeps and release the button after the num ber of beeps equals each digit in your BIN code Repeat for each digit The module Will beep 6 times to acknowledge the entry. The lmmoblllzrng feature rs now dlsarmed. You can re-prograrn compatible keyless remote control lobs to accept the BlN code by pressing the button on the fob in the order of the BIN code and then press the Enter button The module wrlI respond With 6 rapid beeps to acknowledge the code. ll you forget or lose your BIN code, call 1-8007xxx—xxxx. Please have your battery sertal number ava|lable. Power Saver Function The DteHard Gold Antl—Thelt Battery also protects you from accidental battery power discharge. If you leave your lights on, or If there is another unexpected power draw that can affect starting, the battery erI automatically dis- connect the electrical systems to conserve power and pre- vent discharging. You'll know it IS l" Power Saver If your dome lights and other EleCUOHtC accessories don’t oper- ate Also, the engine Will not turnover To reconnect the battery systems, press the remote control button once The system wrll beep twrce to signal that it is reconnected. Follow this procedure whether the battery immobilizing system is in an armed or disarmed mode. It the immobilizer was armed before tl went into Power Saver, it will return in an armed state Press your remote once more to disarm Vou can also reconnect the battery train the Power Saver function by pressing the program button on the battery module once It will beep tWice to signal that it’s reconnected. If your system switches to the Power Saver mode often or tor no apparent reason, it may mean that the battery is nearing the end ol its life, there’s a problem With your vehicle’s charging system, or you have too many acces- sories drawing power Have your serwce technician check your vehicle’s electrical system. Vehicle Storage Mode If you want to store your vehicle for an extended period of time, you can disionnect the battery Without remov- ing it from the vehicle First, press and release the battery program button The module will respond with a single beep. Then press the button on your remote control Within 5 seconds. You'll hear two sets 01 6 rapid beats The module Will then enter into a sleep mode, To take out of Storage mode, push and release the bat tery program button. You'll hear 2 beeps. it the immo— billzing feature was activated when you put the battery in Vehicle Storage Mode, you'll hear one beep. The immobilizing feature wtll remain active until you disarm rt. Memory Erase Function It for some reason you want to erase the memory in your remote control fob so that it won’t operate With your battery, follow these steps’ Make sure the battery immobilizrng feature ls drsarmed, Press and release program button on battery it will beep twt(e. Enter BIN code by pressing and releasing the bat~ tery program button The battery module Will beep twrce. Press and hold program button for 11 beeps. The mod- ule will beep three times. The memon/ tn your remote control |s now erased. The battery immobilizing features remains disarmed, To set up another remote control lob, follow the rnstallation instructions Jump Start Instructions If you use your vehicle to Jump start another vehicle, or you are jump starting your vehicle, remember to disarm the immobilizing function. To (amply wrlh more rules, earns-mam or modtlttatrpn at ms rxerver is prohibit— ed. exrepr tor (nangtng the (ode setting or replacing the bartmy was ARE NO um SERVlCEABlE mrs
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Modify Date : 1999:07:15 01:02:49 Creator : Photoshop PDF Plug-in 1.0 Producer : Photoshop PDF Plug-in 1.0 Create Date : 1999:07:15 01:02:14 Page Count : 10EXIF Metadata provided by EXIF.tools