Chamberlain Group The 1630 Remote Control Transmitter User Manual Exhibit D Users Manual per 2 1033 b3

Download:
Mirror Download [FCC.gov]
Document ID	250821
Application ID	GIHe/WSHi9X+mvENI+CxYw==
Document Description	Exhibit D Users Manual per 2 1033 b3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.55kB (281853 bits)
Date Submitted	2002-06-17 00:00:00
Date Available	2002-06-17 00:00:00
Creation Date	2002-06-07 14:42:29
Producing Software	Acrobat 4.0 Import Plug-in for Windows
Document Lastmod	2002-06-07 14:42:56
Document Title	Exhibit D Users Manual per 2 1033 b3
Document Creator	Acrobat 4.0 Import Plug-in for Windows

/, 970—315L e
CHAMBERLAIN.
PROFESS'ONAL
Model "1 -. ecurity-t-
3-Channel Mini Remote Control
OWNER'S MANUAL
The 90 Series remote control (Securityfl works only with
door openers and light controls having an orange “Smart"
button and a yellow indicator light.
Programming instructions are described and illustrated
below. The additional push buttons can also activate other
garage door openers and/or light controls. (instructions
for programming light products are included with those
accessories.)
Security-I- Garage Door Openers
To Program the Opener to Accept
the Remote Control Code
Select a remote control push button to operate the opener. The
large button is recommended lor use with a garage door opener.
1. Press and holdthe selected remote control push button. See
Figure 1.
2. Press and release the “Smart" button on the opener panel.
See Figure 2. The indicator light on the panel WI|| begin to
blink and the opener lights will llasli once.
3. Release the remote push button.
Now the opener will operate when that remote control button is
pressed. Test it by pressing the remote button to see that the
door goes up and down.
Model m 970-515LG secunirw-
Security+ Garage Door Opener
Select a
push button smart“
Balm Indicalor Light
Figure 1 Figure 2
Adding a remote can also be done from a Multilunction door
control, as follows:
1. Wrtlr the door closed, press and hold a remote push button.
2. Press and hold the Light button on the door control.
3. Press and hold the door control push bar.
4. Alter the opener lights flash, release all buttons.
Test by pressing the remote push button,
To Erase All Remote Control Codes
Press and hold the “Smart" button on the opener panel until
the indicator light turns off (about 6 seconds). All transmitter
codes are now erased. Then lollow the steps above to
reprogram each remote control,
775 {5151.6 Replacement Parts 414560!
Model Mecurityi remote case rinses;-
(circuit board not included)
zvzosz Lithium battery , l0A20
Children operating or playing With a garage door opener can
injure themselves or others. The garage door could close
and cause serious injury or death. 00 not allow children to
operate the wall push buttons or remote controls.
A moving garage door could injure or kill someone under
it, Activate [he opener only when yau can see the door
clearly, it is free of obstructions, and is prapefly adjusted,
NOTICE ms , complies with Part is m peielion is sublect m the
tollowmg two on s lll tm Wire nay ml case harrnhl l weenie arm (21 this gem
must acept any tnteltcrcnce icct‘ived, lncludinq momma that may cause undesired ooeiallon
To comply wilt" PCCilC iiilcs adiuslmenr or "mailman at "us iccerver andlor lmsmtre» is
proliibltcd, except lot cnanglwg the we selm‘g or rnolxunu m battery mans Alli No
OTHER USER SERVlCEABLL PARTS ’
"7 To control the Opener Lights
(only ill/011 have a Mull/function door Control)
With Security+ transmitters, a remote push button can be
programmed to Operate the opener lights without opening the
door
1 With llie dour closed. press and hold the remote button that
you want to control the light
2. Press and hold the Light button on the door control.
3. Press and hold the Lock button on the door control
4 Alter the opener lights flash, release all buttons.
Test by pressing the remote push button. The opener llghts
should turn on or oil but the door should not move.
OpenlCIoseJStop Operation
(only ilyou have a Mull/function door control}
Your Security-F remote control can be programmed to operate
one door using all 3 buttons: the left button will only open the
door, the m/ddle button Will only close the door, and lhe third
hutton Will stop the doors movement You may set up this
feature as lollows'
1. Willi the door closed, press and hold the
lelrremote push button.
2. Press and hold the Lock button on the
door control.
3 Press and hold the door control push bar.
Open Close
When the opener lights llash, release all buttons, Test by
pressing the left (Open) button on the remote The door should
open. Press it again while the door is open and nothing should
happen Press the middle (Close) button and the door should
close. Press the third (Slop) button while the door is moving
and it should stop immediately.
A WARNING
promptly notify doctor,
The Remote Control Battery
The lithium battery should
produce power lor up to 5 years.
To replace battery, pry open
case as shown. Insert battery
pOSfIlVS side up. Dispose of old
battery properly.
FOR SERVICE DIAL OUR TOLL FREE NUMBER: 1-800-528-2817
© 2000, The Chamberlain Group, Inc.
1m ll‘l/i25’88
All Rights Reserved
Printed in Mexico

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2002:06:07 14:42:56-05:00
Create Date                     : 2002:06:07 14:42:29-05:00
Creator                         : Acrobat 4.0 Import Plug-in for Windows
Producer                        : Acrobat 4.0 Import Plug-in for Windows
Page Count                      : 1

EXIF Metadata provided by EXIF.tools