Chamberlain Group The 1631 Remote Control Transmitter User Manual Exhibit D Users Manual per 2 1033 b3

Download:
Mirror Download [FCC.gov]
Document ID	227865
Application ID	SyaeNe2HS4M1uuSWz+qFWg==
Document Description	Exhibit D Users Manual per 2 1033 b3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.89kB (298617 bits)
Date Submitted	2002-02-26 00:00:00
Date Available	2002-02-26 00:00:00
Creation Date	2002-02-25 13:19:27
Producing Software	Acrobat 4.0 Import Plug-in for Windows
Document Lastmod	2002-02-26 10:57:56
Document Title	Exhibit D Users Manual per 2 1033 b3
Document Creator	Acrobat 4.0 Import Plug-in for Windows

!- E-iflde-fifi
nommx-Ffi,
lo comply min FCC/K} ruins, aayiistmeni or modification of receiver (mu/U!
transmitter is prohioitec, except tor changing [he code setting and replacing the
llartsrnitler battery, THERE Ans no OTHER usen senwcmate PAnrs
Featu res
For use with any secunn'w-
compatible garage door opener
receiver.
Personalixed Password: Up to
10.000 possrble combinatohs. Password
can be easily changed if desired.
Temporary password: Can be added for Visitors
or service persons This temporary password can be
limited to a programmable number of hours or a
programmable number 01 entries.
Rolling Code: While your password remains constant until
you change it, the code between the Keyless Entry and the
receiver changes With each use, randomly accessing over
100 billion new codes.
Operation: Opener activates when 4-diglt password and
Enter button is pressed.
If wrong numbers are accidentally pressed, correction can be
made immediately. The Enter button Will transmit only the last
four digits
The Keypad will blink for 15 seconds after the password is
transmitted. During that time the Enter button can be used to
stop or reverse the door travel.
Setting the Personal Entry Password
We recommend that you program your personal
password now, before you install the Keyless Entry.
Then you can test the reception at the mounting
location before you proceed further.
1. Choose a 4‘dlglt personal entry password using the
numbers from t] to 9 (a number can be used more than
once, for example. 4,0, 4.1).
2. Press the tour buttons tor the
password, then press and
holdthe Entcr button The
indicator light on the door
opener panel will blink.
3. Press and release the “Smart"
(learn) button on the door
opener panel. After the
opener lights blink, release
the Enter button.
Test by pressing the the password, then press Enter. The
door should begin to move.
SECURITY-I-
Garage Door Opener
“Sniart' “earn“
outtm lndicato' Light
You may also program the Keyless Entry from a
multifunction door control, as follows:
1. With the door closed, enter the tour digit password
desired, then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
A. After the opener lights blink, release all buttons,
97é'3/5L/‘7 _
Model MQM Security-I-
Wireless Keyless Entry
Children operating or playing with a garage door
opener can injure themselves or others. The
garage door could close and cause serious injury
or death. Do not allow children to operate the wall
push buttonls) or remote control(s).
A moving garage door could injure or kill someone
under it. Activate the opener only when you can see
the door clearly, it is free of obstructions, and is
properly adjusted.
Installation
Typical
Choose a convenient Sectional Pour
Installation
location for installation, /
It should be at eye f;
level. reachable by the (
shortest person who t .
will use it, and within
sight of the door
For a oneApiece door,
use the optional
location shown in the
illustration (on the edge
of the door lamb) to avoid iniuiy as the door
swings up and out.
Test the reception at the Keyless
Entry by operating your opener
from the selected location.
Change the location if necessaiy.
Remove the battery compartment
cover to access the bottom
mounting hole:
mounting hole 7
- Insert a small phillips screw driver Ball“ 413
into the small hole at the bottom of
Battery ,
the cover and gently pull outward to Cover
loosen. v
- Slide the cover down to remove.
Center the keypad at eye level against the selected
location. Mark 4-1/4" up the centerline from the bottom and
drill a 1/ " pilot hole. lnslall top mounting screw, allowing
1/8" to protrude above surface. Position keypad on screw
head and adjust for snug fit.
With cover open so bottom mounting hole is visible, use a
punch to mark hole. Remove keypad and drill 1/8" pilot
hole. Replace keypad and complete installation with
bottom screw, using care to avoid cracking plastic housrng.
Do not ovedighten.
To replace the battery cover, insen the lip at the top and
snap in place.
Exterior Front Wa‘l
i-r'iece or
Sectional Door
, 3/4,
l// oaarlamn Edge
p ’ (Opttullttllocalloll
./ tor IrF’iece omit
i .
\ l 1; Door Jamb FitLL'
\, l SECTlDNAL noon oNLv
U ) KEYPAD MUST as lNSTALtED
t WlTHlN SIGHTOFTHE coon
Bottom
Side two contains instructions for changing the personal
entry password and setting a temporary password.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2002:02:26 10:57:56-06:00
Create Date                     : 2002:02:25 13:19:27-06:00
Creator                         : Acrobat 4.0 Import Plug-in for Windows
Page Count                      : 1
Mod Date                        : 2002:02:26 10:57:56-06:00
Creation Date                   : 2002:02:25 13:19:27-06:00
Producer                        : Acrobat 4.0 Import Plug-in for Windows
Metadata Date                   : 2002:02:26 10:57:56-06:00

EXIF Metadata provided by EXIF.tools