Chamberlain Group The 1A5260 Garage Door Opener User Manual 1A5260 instructions

Download:
Mirror Download [FCC.gov]
Document ID	20967
Application ID	GND4lPqmNCd5/iw+8kLi4Q==
Document Description	1A5260 instructions
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.24kB (77954 bits)
Date Submitted	1999-01-26 00:00:00
Date Available	1999-03-23 00:00:00
Creation Date	1998-11-17 14:23:09
Producing Software	Acrobat 3.0 Scan Plug-in
Document Lastmod	1998-11-17 14:23:53
Document Title	1A5260 instructions
Document Creator	Acrobat 3.0 Scan Plug-in

TWO/ML j/VS 7&14 rwA/S
Lift-MUSE!
The Professional Line
Owner's Manual
Modelm- M5960
Single-Function Remote Control
Modem“ m5 l;2éi/
Multl-Function Remote Control
Chlldren operating or playlng with a garage door
opener can lnlure themselves or others. The garage
door could close and cause serious Injury or death.
Do not allow children to operate the wall push
button(s) or remote oonlrol(s).
A moving garage door could Inlure or kill someone
under It. Activate the opener only when you can see
the door clearly, It Is tree of obstructions, and Is
properly adjusted.
POO/DOC mles prohbll lrf‘ustments to or modfimlion ol reoelver and/or transmitter circuitry except tor changing the code setting end/or
lepiac'flg me lransrnmer battery. THERE ARE NO USER SERVICEABLE PARTS.
The 80 Serles remote control (with green battery test light) works only with door openers and light
controls having a green “SMART" button and a green indicator Ilght.
Programmlng Instructions are described and Illustrated below. The additional push buttons on the
Multi-Functlon Remote Control can also activate other garage door openers end/or light controls.
(Instructions tor programmlng llght products are lneluded wllh those eccessorles.)
"SMART" GARAGE DOOR OPENERS
(With Green “SMART“ Button
and Green indicator nght)
PROGRAM THE OPENER TO ACCEPT THE
REMOTE CONTROL CODE
Select a remote control push button to operate the
opener. The large button is recommended for use
with a gamma door opener. \
1. Press and hold the selected remote control push
button (figure 1).
2. Then press and release the green “SMART“ button
on the opener panel (Figure 2). The opener light
will flash once. Release the remote control push
button. ‘ . 2
Now the opener will operate when the remote push
button is pressed. 1 , . a 3‘
NOTE: If you release the remote control push
button before the opener llght flashes, the
recelver has not accepted the code.
To Erase All Transmitter Codes
- Press and hold the ‘SMAR’I‘ button on the opener
panel until the indicator light turns off (about 6 '
seconds). ALL the codes the opener has learned
will be erased.
- To reprogram, repeat Steps 1 and 2 for each remote
control in use. Code programming instructions
are also located on the opener panel.
Figure 1 Model 81LM
Garage Door Opener
(With Green "SMART‘nButtom
Replacement Parts
SingleAFuncficn remote use, cover, screw
(circuit board not included) Model 51m
12 Volt battery
41A3984~7
10A”
Multi-Function remote case. cover. screw '
- Model BSLM
41A3883-7
WM A
(circuit board not Included)
12 Volt baflery
' FOR SERVICE DIAL OUR TOLL FREE NUMBER: 1—800-528-9131 7
e 1994". Chainhenain'Group Inc.
All Flights Reserved
114A1763B
Printed in Mexico

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 1998:11:17 14:23:53
Creator                         : Acrobat 3.0 Scan Plug-in
Producer                        : Acrobat 3.0 Scan Plug-in
Create Date                     : 1998:11:17 14:23:09
Page Count                      : 1

EXIF Metadata provided by EXIF.tools