Chamberlain Group The 1A5454 Garage Door Opener User Manual instructions page one

Chamberlain Group Inc, The Garage Door Opener instructions page one

Contents

instructions page one

Download: Chamberlain Group The 1A5454 Garage Door Opener User Manual instructions page one
Mirror Download [FCC.gov]Chamberlain Group The 1A5454 Garage Door Opener User Manual instructions page one
Document ID140896
Application IDVOCiIEH5UEUz08CNhqVD+w==
Document Descriptioninstructions page one
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize9.19kB (114852 bits)
Date Submitted2001-03-20 00:00:00
Date Available2001-05-21 00:00:00
Creation Date2001-03-08 16:09:42
Producing SoftwareAcrobat 4.0 Import Plug-in for Windows
Document Lastmod2001-03-08 16:10:47
Document Titleinstructions page one
Document CreatorAcrobat 4.0 Import Plug-in for Windows

Luff Master:
NOTICE To comply with FCC rules, admstrnerrt or modifications at this receiver
and/or transmitter are prohlhlted. except for changing lite code setting or
replacing the battery THERE ARE NO OTHER USER SERVlCEABLE PARTS
The 984LM remote control can activate four separate
garage door openers, gate openers, entryways and/or light
controls. (Instructions for programming light products are
included with those accessories.)
All four push buttons work with common platform receivers
having a yellow indicator light. The rolling code between
these channels and the receiver changes with each use.
randomly accessing over 100 billion new codes.
Instructions are described and illustrated below,
WHEN USED WITH SECURITY'Il
GARAGE DOOR OPENERS
NOTE: When using Common Platform receiver, refer to
instructions supplied with receiver.
To program the opener to accept the remote control
code:
Select a remote control push button. The first button is
recommended for use with a garage door opener.
1 Press and holdthe selected push button, See Figure 1.
2.Press and release the “Smart" (learn) button on the
opener panel. See Figure 2. The indicator light on the
panel will begin to blink and the opener lights will flash
once.
3. Release the remote push button.
Now the opener will operate when that push button is
pressed.
Adding a remote can also be done from the door
controt,as follows:
1 With the door closed, press and hold the selected push
button.
2, Press and hold the Light button on the door control.
3. Press and hold the door control push bar.
4. After the opener lights flash, release all buttons.
Test by pressing the remote push button (garage door
should open).
To erase all remote control codes from the receiver:
Press and hold the “Smart" button on the opener panel until
the indicator light turns off (about 6 seconds). All transmitter
codes inside the receiver are now erased. Then follow the
steps above to re—program each remote control.
To check batteries:
1 Look at LED while pressing any button, A flashing LED
indicates batteries are ok. See Figure 3.
2. See page 2 for battery replacement instructions.
Model 984LM
4-Channel Remote Control
OWN ER'S MANUAL
Children operating or playing with a garage door
opener can injure themselves or others. The gamge
door could close and cause serious injury or death.
Do not allow children to operate the wall push
buttons or remote controls.
A moving garage door could injure or kill someone
under it. Activate the opener only when you can see
the door clearly, it is free of obstructions, and is
properly adjusted.
Figure 1
Model 984LM
Remote Control
Figure 2
SECU RITY 1-
Garage Door Opener
? Q
"Smart" tleam)
Button indicator Light
Figure 3
Yellow
Indicator
Light

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2001:03:08 16:10:47-06:00
Create Date                     : 2001:03:08 16:09:42-06:00
Creator                         : Acrobat 4.0 Import Plug-in for Windows
Producer                        : Acrobat 4.0 Import Plug-in for Windows
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: HBW1A5454

Navigation menu