Chamberlain Group The 2227 Remote Control Transmitter User Manual CPY Title

Download:
Mirror Download [FCC.gov]
Document ID	604989
Application ID	HrDnpvVZgXPdTgqVQt419A==
Document Description	Exhibit D Users Manual per 2 1033 b3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.71kB (246331 bits)
Date Submitted	2005-11-22 00:00:00
Date Available	2005-11-22 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	CPY Document Producer
Document Lastmod	0000-00-00 00:00:00
Document Title	CPY Document Title
Document Creator	CPY Document Creator
Document Author:	CPY Document Author

CHAMBERLAIN®
roman/m Win/wow
FEATURES
For use with any 315MH1 SECURITYF garage door opener
having a purple “learn" button.
Personalized Password: Up to 10,000 possible
combinations. Password can be easily changed if desired.
Temporary Password: Can be added for visitors or service
persons. This temporary password can be limited to a
programmable number or hours or a programmable number of
entries.
Bolling Code: While your password remains constant until you
change it, the code between the Keyless Entry and the receiver
223an with each use, randomly accessing over 100 billion new
95.
Operation: Opener activates when 4—digit password and ENTER
button is pressed.
Ii wrong numbers are accidentally pressed, correction can be
made immediately. The EN’I'EFI button will transmit only the last
four digits.
The Keypad will blink for 15 seconds after the password is
transmitted During that time the ENTER button can be used to
stop or reverse the door travel.
SETTING THE PERSONAL ENTRV PASSWORD
(0) Model 940D-01 Security-I-
Wireless Keyless Entry
To prevent possible SERIOUS INJURY or DEATH Irom a moving
gate or garage door:
0 Install Keyless Entry Control within sight oi the garage door. out of
reach of children at a minimum height of 5 feet (1.5 m). and away
from all moving parts of door.
~ALWAYS keep remote controls out of reach of children. NEVER
permit children to operate, or play with remote control
transmitters.
-Activate gate or door ONLY when it can be seen clearly, is properly
adjusted, and there are no obstructions to door travel.
- ALWAYS keep gate or garage door in sight until completely closed.
NEVER permit anyone to cross path 01 moving gate or door,
NOTICE: To compiy with too and or Industry Canada (lc) rules, ad|uxtmsnt or mndflicadnns at
this luculvul Ind/oi tnrrsrnitur are prohibited, wept mi Mm“ the code setting or luvlulng
the balmy. THERE ARE NO OTHER USER sEvacEABLE P .
Tested to Compiy with ECG stewards FOR HOME on orncE usE. Operation is whim to me
Inilowrng two conditions: (ti this advice may not cause i’lxmilul interlerwrce, and (2) this device
must accept any interference received. including Interment! that may cause undesired npeminn.
We recommend that you program your password now, belore you Install the Keyless Entry. Then you can test the reception at the
mounting location betore you proceed further.
USING THE MULfl-FUNCflON DOOR CONTROL
1. Enter a tour digit personal identification
number (PIN) of your choice on the keypad.
Then press and hold ENTER.
2. While holding the ENTER button, press and hold
the LIGHT button on the Multi-Function Door
Control.
3. Continue holding the ENTER and LIGHT
buttons while you press the push her on the
Multi-Function Door Control (all three buttons
are held).
4. Release buttons when the motor unit lights blink.
It has learned the code. It light bulbs are not
installed. two clicks will be heard.
USING THE “LEARN” BU1TON
unit. The Ieam indicator light will glow
steadily for 30 seconds.
1. Press and release the “leam” button on motor G J’
(to
2. Within 30 seconds, enter a four digit personal
idemilication number (PIN) oi your choice on the
keypad. Then press and hold the ENTER
button.
3. Release the button when the motor unit lights
blink. It has learned the code. If light bulbs are
not Installed, two clicks will be heard.
Side two contains instructions for installing the Keyless
Entry, changing the personal entry password and
setting a temporary password.
INSTALLATION
1. Choose a convenient
location for installation,
Install out of the reach of
children at a minimum
height of 5 feet (15m).
away from all moving
parts of door.
“PM THE KEVLEss ENTRY BATTERY
To prevent possible SERIOUS INJURY or DEATH:
(camel) - NEVER allow small OWN
' If battery is swallows , t octor.
. DoorJamb Face
£3.22 233323“ Of the SECT'O'W- 90°“ °"“’ The battery should produce pogvelr for atflleast one
- KEVPAD uusT BE INSTALLED ear. Replaoe when the keypa i umina on
operatlng your opener thlrlrr slon'r OF THE DOOR becomes dim. Dispose ol old batteries property.
from the selected
location. Change the location if necessary.
2. Remove the compartment cover to access the bottom mounting ~
hole. Slide the cover down to remove. Remove batteries.
3. Center the template on selected location. Mark the
top centerline screw location and drill 1/8ll pilot
hole. Install top mounting screw, allowing 1/8" to
protnrde above surface. Position keypad on Bone,“
screw head and adjust tor snug fit. Drill 1/8' "mummy m. KEYPAD MOUN11NG TEMPLATE
pilot hole for the bottom mounting screw.
Complete installation with bottom screw, using 5m",
care to avoid cracking plastic housing. Do not av
overtighten. Compartment
Reinstall batteries and replace the compartment cover. cw”
To replace compartment cover insert the lip at the top and snap
it into place.
To CHANGE AN EXISTING, KNOWN PIN
If the existing PIN is known, it may be changed by one person
without using a Iadden
1. Press the four buttons tor the present PIN, then press and hold
the it button.
The opener light will blink twice. Release the it button.
2. Press the new 4-digit PM you have chosen, then press ENTER.
The motor unit lights will blink once when the PIN has been
learned,
Test by pressing the new PINI then press ENTER. The door should
move.
TO SET A TEMPORARV PIN
You may authorize access by visitors or service people with a
temporary 4-dlglt PIN. After a programmed number of hours or
number of accesses, this temporary PIN ex ires and will no longer
open the door. It can be used to close the our even after it has
expired. To set a temporary PIN:
1. Press the tour buttons for your rsonal entry PIN (not the last
temporary PIN), then press an hold the =l= button,
The opener light will blink three times, Release the
button.
2. Press the temporary 4-digit PIN you have chosen, then press
ENTEFI,
The opener light will blink tour times.
3. To set the number 01 hours this temporary PIN will work, press
the number ol hours (up to 255), then press *.
on
To set the number ol times this temporary PIN will work, press the
number of times (up to 255), then press it.
The opener light will blink once when the temporary PIN has been
learned.
Test by pressing the tour buttons for the temporary PIN, then press
Enter. The door should move. It the temporary PIN was set to a
certain number of openings. remember that the test has used Up
one opening.To clear the temporary password. repeat steps 1-3,
setting the number of hours or times to 0 in step 3,
SPECIAL NOTE: The temporary password can ONLY be Replacement parts:
programmed to keypads working on a Chamberlain, Craflsmarflor Keypad cover . . “0542-1
LilrMasrer Garage Door Opener. It WILL NOT work on Battery 9v. 10A25
keypads programmed to an external receiver. Battery cover . . 410541
The temporary password will continue to CLOSE the door even
after the time has “piled. FOR SERVICE DIAL oun TOLL FREE NUMBER:
[0 elirzinate this, program a new temporary password into the 1-300-52M131
eypa .
0 2005, The Chamberlain Group. Inc.
"Macao All Rights Reserved Printed in Mexico
lesman' is a Registered Trademark of Sears. Roebuck and Co.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:7bb33927-71c6-40c4-af4c-23e3f9a038ed
Mod Date--Text                  : CPY Document Mod Date
Creation Date--Text             : CPY Document Creation Date
Producer                        : CPY Document Producer
Creator Tool                    : CPY Document Creator
Modify Date                     : 2005:11:16 14:53:20-06:00
Metadata Date                   : 2005:11:16 14:53:20-06:00
Document ID                     : uuid:cb97f7ec-f143-42cf-9717-10bb08266839
Format                          : application/pdf
Title                           : CPY Document Title
Creator                         : CPY Document Author
Description                     : CPY Document Subject
Create Date                     : CPY Document Creation Date
Author                          : CPY Document Author
Keywords                        : CPY, Document, Keywords
Subject                         : CPY Document Subject

EXIF Metadata provided by EXIF.tools