Chamberlain Group The 2228 Remote Control Transmitter User Manual CPY Title

Download:
Mirror Download [FCC.gov]
Document ID	604976
Application ID	GRI6EXAkmFHSYPG/JJKE2A==
Document Description	Exhibit D Users Manual per 2 1033 b3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.87kB (235892 bits)
Date Submitted	2005-11-22 00:00:00
Date Available	2005-11-22 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	CPY Document Producer
Document Lastmod	0000-00-00 00:00:00
Document Title	CPY Document Title
Document Creator	CPY Document Creator
Document Author:	CPY Document Author

C——HAMBEHLAIN
Lift Master
FEATURES
For use with any SECURITY-P garage door openers having
an orange ‘Iearn" button.
Personalized Password: Up to 10,000 possible
combinations. Password can be easily changed ii desired.
Temporary Password: Can be added for visitors or service
persons. This temporary password can be Ilmlted to a
programmable number of hours or a programmable number
of entries.
Bolling Code: While your password remains constant until
you change It, the code between the Keyless Entry and the
receiver changes with each use, randomly accessing over
100 billion new codes.
Operation: Opener activates when edigit password and
Enter button is pressed.
Ii wrong numbers are accidentally pressed, correction can be
made immediater The Enter button will transmit only the
last four digits.
The Keypad wIII blink for 15 seconds after the password is
transmitted. During that time the Enter button can be used to
stop or reverse the door travel.
SETTING THE PERSONAL ENTRY PASSWORD
F E S S I O N A L
Model 977LM, 977LMC Security-W
Wireless Keyless Entry
To prevent possible SERIOUS INJURY or DEATH from a moving
gate or garage door:
- Install Keyless Entry Control within sight of the garage door, out of
reach oi children at a minlmum height of 5 test (1 .5 m), and away
irom all moving parts oi door.
~ ALWAYS keep remote controls out 01 reach oi children. NEVER
permit children to operate, or play with remote control
transmitters.
- Activate gate or door ONLY when it can be seen clearly. is properly
adjusted, and there are no obstructions to door travel.
- ALWAYS keep gate or garage door in sight until completely closed.
NEVER permit anyone to cross path oi moving gate or door,
MoTlcE: to comply with rm and or Industry canada rules no), adjustment or modifications or
Ittis receiver arid/tn transmitter are prohibited, mam tor dianqlna lnr code setting or mplaclrlq
the battery. THERE ARE NO OTHER USER sEvacEABLE PARTS.
Tasted to Comvly with too stand-ids Eon HOME DR OFFICE USE, Operation is some tn the
following two conditions: (“this dwlee may not ctusc hIlmItll imertmmx, and t2| lttis devica
must accent any lntevieiunu waived, including imeriet'ence that may muse undesired npmunn.
We recommend that you Install the batteries and program the keyless entry now, prior to Installation. Then you can test the
reception at the mounting location before you proceed further.
USING THE MULfl-FUNCTION DOOR CONTROL
1. Enter a tour digit personal identification
number (PIN) of your choice on the keypad,
Then press and hold ENTER.
2. While holding the ENTEFI button, press and
hold the LIGHT button on the MullI-Function
Door Control.
3. Continue holding the ENTER and LIGHT
buttons while you press the push bar on the
Mum-Function Door Control (all three buttons
are held).
4. Release buttons when the motor unit lights
blink. It has learned the code. If light bulbs
are not installed, two clicks will be heard.
USING THE “LEARN" BUTTON
1. Press and release the “learn" button on motor q
steadily for 30 seconds. . '
unit. The learn indicator light will glow L
2. Within 30 seconds, enter a four digit personal
idemiiication number (PIN) oi your choice on
the keypad. Then press and hold the ENTER
button.
3. Release the button when the motor unit lights \ l /
blink. It has learned the code. It light bulbs _ Q —
are not installed, two clicks will be heard. / \
Side two contains instructions for installing the Keylees
Entry, changing the personal entry password and
setting a temporary password.
TO CHANGE AN EXISTING, KNOWN PIN
It the existing PIN is known, it may be changed by one person
without using a ladder.
1. Press the tour buttons for the present PIN, then press and
hold the # button.
The opener light will blink twice. Release the # button.
2, Press the new 4-digit PIN you have chosen. then
press ENTER.
The motor unit lights will blink once when the PIN has been
learned.
Test by pressing the new PIN. then press ENTER. The door
should move.
TO SET A TEMPORARY PIN
You may authorize access by visitors or service people with a
temporary 4-digit PIN. Alter a programmed number of hours or
number of accesses, this temporary PIN expires and will no
longer open the door. It can be used to close the door even
after it has expired. To set a temporary PIN:
1. Press the four buttons tor your personal entry PIN (not the
last temporary PIN), then press and hold the * button.
The opener light will blink three times. Release the button.
2. Press the temporary 4-digit PIN you have chosen, then press
ENTER.
The opener Ilght wlll blink four times.
3. To set the number of hours this temporary PIN will work,
press the number ol hours (up to 255), then press *.
OR
3. To set the number of times this temporary PIN will work,
press the number oi times (up to 255), then press #.
The opener light will blink once when the temporary PIN has
been learned.
Test by pressing the tour buttons for the temporary PIN, then
press Enter. The door should move. If the temporary PIN was
set to a certain number of openings, remember that the test has
used up one opening. To clear the temporary password, repeat
steps 1-3, setting the number at hours or tlrnes to 0 In step 3.
SPECIAL NOTE: The temporary password can ONLYbe
programmed to keypads working on a Chamberlain or
LiftMaster Garage Door Opener. It WILL NOT work on
keypede programmed to an extemal receiver.
The temporary password will continue to CLOSE the door even
after the time has expired. To eliminate this, program a new
temporary password into the keypad.
THE KEVLESS ENTRY BATTERIES
To prevent possible SERIOUS INJURY or DEAT
- NEVER allow small children near batteries.
0 It battery is swallowed, immediately notify doctor
The batteries should produce power
for at least one year. Replace when
the keypad illumination becomes dim
or it doesn't stay on after a keystroke. 3 mm
Dispose of old batteries properly. Mounting ”0,3
Battery _ v“.
FOR SERVICE DIAL OUR ' I 7
TOLL FREE NUMBER: Saw," °"'°°"e’ '
In the U.S. 1-800-528-2817
In Canada balm-6544736
INSTALLATION
1. Choose a convenient
location tor
installation, Install out
oi the reach of
children at a
minimum height ol 5
feet (1.5m), away
from all moving parts
oi door.
Test the reception oi ,.
the Keyless Entry by operating your opener from the selected
location. Change the location it necessary.
2, Remove the compartment cover to access the bottom
mounting hole. Slide the cover down to remove. Remove
batteries,
3. Center the template on selected location. Mark the top
centerline screw location and drill 1/8" pilot hole. Install top
mounting screw. allowing 1/8" to protrude above surface.
Position keypad on screw head and adjust tor snug fit. Drill
1/8" pilot hole tor the bottom mounting screw. Complete
installation with bottom saew, using care to avoid cracking
plastic housing. Do not overtlghten.
Reinstall batteries and replace the compartment cover. To
replace compartment cover insert the lip at the top and snap
it into place.
KEYPAD MOUNTING TEMPLATE
KEYPAD MUST BE INSTALLED
I WITHIN slol-l'r OF THE DOOR
© 2004, The Chamberlain Group, Inc.
114A2924
All Rights Reserved
Printed in Mexico

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
Title                           : CPY Document Title
Author                          : CPY Document Author
Subject                         : CPY Document Subject
Keywords                        : CPY, Document, Keywords
Creator                         : CPY Document Creator
Producer                        : CPY Document Producer
Create Date                     : CPY Document Creation Date
Modify Date                     : CPY Document Mod Date

EXIF Metadata provided by EXIF.tools