Chamberlain Group The 2309 Remote Control Transmitter User Manual 3094

Download:
Mirror Download [FCC.gov]
Document ID	704381
Application ID	z+Ww0ioiH7XLQGNMeob0gQ==
Document Description	Exhibit D Users Manual per 2 1033 b3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.36kB (191959 bits)
Date Submitted	2006-09-13 00:00:00
Date Available	2006-09-13 00:00:00
Creation Date	2006-09-07 16:23:41
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2006-09-08 09:14:04
Document Title	3094.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	HSieradz

Model 373P 315MHz Security 3 button Remote Control Sample instructions
Only for use with 315 MHz Security ® garage door openers
and universal receivers that have a purple “learn” button.
WARNING
I nstructi ons are Described and I llustrated Below
OR
— ——
— ——
— —
1. Press and release the “learn” button on
the motor unit. The learn indicator light
will glow steadily for 30 seconds.
2. Within 30 seconds, press and hold the
button on the hand-held remote.
3. Release the button when the motor unit light
blinks. It has learned the code. If light bulbs
are not installed, two clicks will be heard.
To Erase All Codes From Motor Unit Mem ory
To deactivate any unwanted remote, first erase all codes:
Press and hold the “learn” button on motor unit
until the learn indicator light goes out
(approximatel y 6 seconds). All previous codes
are now erased. Reprogram each remote or
keyless entry you wish to use.
Component "3094.pdf"
NOTE: Not available with universal receiver.
Your 315 MHz Security ® remote control can be programmed to
operate one door using all 3 buttons: the large button will only
open the door, the middle button will close the door, and the third
button will stop the door’s movement. You
may set up this feature as follows:
1. With the door closed, press and hold the
Open
large remote push button.
Close
2. Press and hold the Lock button on the
Stop
door control.
3. Press and hold the door control push bar.
When the opener lights flash, release all buttons. Test by pressing
the large (Open) button on the remote. The door should open.
Press it again while the door is open and nothing should happen.
Press the middle (Close) button while the door is moving and it
should close. Press the third (Stop) button and the door should
stop immediately.
The Rem ote Control Batteries
To prevent possible SERIOUS INJURY or DEATH:
• NEVER allow small children near batteries.
• If battery is swallowed, immediately notify doctor.
NOTE: Not available with universal receiver.
With 315 MHz Security ® remote controls, a remote push button
can be programmed to operate the opener lights without opening
the door.
1. With the door closed, press and hold the remote button that
you want to control the light.
2. Press and hold the Light button on the door control.
3. Press and hold the Lock button on the door control.
4. After the opener lights flash, release all buttons.
Test by pressing the remote push button. The opener lights
should turn on or off but the door should not move.
114A3094
Open/Close/Stop Operation
WARNING
To Control the Opener Lights
FOR SERVICE DIAL OUR TOLL FREE NUMBER:
US: 1-800-528-2817
CANADA: 1-800-654-4736
To prevent possible SERIOUS INJURY or DEATH from a moving gate
or garage door:
• ALWAYS keep remote controls out of reach of children. NEVER
permit children to operate, or play with remote control transmitters.
• Activate gate or door ONLY when it can be seen clearly, is properly
adjusted, and there are no obstructions to door travel.
• ALWAYS keep gate or garage door in sight until completely closed.
NEVER permit anyone to cross path of moving gate or door.
The lithium batteries should produce
power for up to 5 years. To replace,
pry open case with visor clip or
screwdriver, as shown. Insert
batteries positive side up (+).
Dispose of old batteries properly.
Battery
positive
side up (+)
NOTICE: To comply withFCCand or Industry Canada (IC) rules, adjustment or modifications of this
receiver and/or transmitter are prohibited, except for changing the code setting or replacing the
battery.THERE ARENOOTHER USERSERVICEABLEPARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the
followingtwoconditions: (1) this devicemay not causeharmful interference, and (2) this devicemust
accept any interferencereceived, includinginterferencethat may cause undesired operation.
Replacemen t Parts
3V2032 Lithium battery: . . . . . . . . . . . . . . . . . . . . . . . . . .10A20
Visor clip: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29B137
© 2005, Chamberlain Group Inc.
All Rights Reserved
FOR REFERENCE ONLY
Printed in Mexico
Image: 3094.pdf

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:1a446ff8-05f2-4d32-89c0-621ed48a4494
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2006:09:08 09:14:04-05:00
Create Date                     : 2006:09:07 16:23:41-05:00
Metadata Date                   : 2006:09:08 09:14:04-05:00
Document ID                     : uuid:fc9e3ee4-aa59-48a6-abdb-d438eebc0718
Format                          : application/pdf
Title                           : 3094.pdf
Creator                         : HSieradz
Author                          : HSieradz

EXIF Metadata provided by EXIF.tools