Chamberlain Group The 7922 FCC Part 15 Remote Control Transmitter User Manual 114A3485 3c

Download:
Mirror Download [FCC.gov]
Document ID	1755586
Application ID	yPpi+Isj24jHSpyu4//tNA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	109.34kB (1366692 bits)
Date Submitted	2012-07-30 00:00:00
Date Available	2012-07-30 00:00:00
Creation Date	2007-07-19 09:14:55
Producing Software	Acrobat Distiller 8.1.0 (Macintosh)
Document Lastmod	2012-07-23 14:48:15
Document Title	114A3485(3c)
Document Creator	QuarkXPressâ„¢: AdobePS 8.5.1
Document Author:	krista Hartzell

CLICKER MODEL KLIK1U
To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:
• ALWAYS keep remote controls out of reach of children. NEVER permit children to
operate, or play with remote control transmitters.
• Activate gate or door ONLY when it can be seen clearly, is properly adjusted and there
are no obstructions to door travel.
• ALWAYS keep gate or garage door in sight until completely closed. NEVER permit
anyone to cross path of moving gate or door.
Universal Garage Door Opener Remote Control
Read instructions thoroughly BEFORE beginning.
Start with garage door closed. Identify garage door opener type - Smart/Learn button or
DIP Switch. Smart/Learn button or DIP Switches are located on motor unit or external
receiver. Refer to owner’s manual if necessary.
Proceed with instructions according to your type of garage door opener.
DIP SWITCH
SMART/LEARN BUTTON
See Chart A to
determine # of times to
press button and write
in blank on step 5.
CHART A
CHART B
# of
times to
press
button
Brand
Description
Frequency
# of
times to
press
button
Brand
Type/Color of
Smart/Learn
Frequency
11
12
Chamberlain
Chamberlain
390 MHz
13
14
15
16
17
18
Genie
Linear Multicode
Chamberlain
Stanley/Multicode
Genie
Linear
Moore-O-Matic
Chamberlain
9 Position
9 Position
Canada
12 Position
10 Position
8 Position
10 Position
9 Position
Mega-Code
Orange
Purple
Green
318
390
315
390
Intellicode
315 MHz
8 Position
7 Position
310 MHz
390 MHz
Linear
Chamberlain
Chamberlain
Chamberlain
Genie
Overhead Door
Genie
Overhead Door
Stanley
Wayne Dalton
Intellicode
Secure Code
Rolling Code
390 MHz
310 MHz
372.5 MHz
19
315
390
300
390
310
390
MHz
MHz
MHz
MHz
MHz
MHz
DIP SWITCH
SMART/LEARN BUTTON
OR
10 11 12
MHz
MHz
MHz
MHz
See Chart B to
determine # of times to
press button and write
in blank on step 5.
Existing
Remote
Clicker
Remote
Press program button
until LED lights.
Match DIP switches. Turn
extra switches OFF.
Motor Unit
KG
Press program button
until LED lights.
Press and release the
smart/learn button.
Button 2
Button 1
Select a button to program.
Press button
times
ensuring LED stops flashing
after each press. Code
is accepted when
door activates.
Button 2
Button 1
Select a button to program.
Press button
times
ensuring LED stops flashing
after each press. Code is
accepted when one of the
following occurs:
REMOTE CONTROL BATTERY
To prevent possible SERIOUS INJURY or DEATH:
• NEVER allow small children near batteries.
• If battery is swallowed, immediately notify doctor.
KG
OR
OR
The lithium battery should produce power for up to 5 years.
Press program button.
To reduce risk of fire, explosion or chemical burn:
• Replace ONLY with 3V2032 coin batteries.
• Do NOT recharge, disassemble, heat above 100°C (212°F) or
incinerate.
Press program button.
Dispose of batteries properly.
Replace battery with 3V2032
coin cell battery only.
10 11 12
Programming complete.
Press selected button
to test.
NOTE:
Products other than Chamberlain:
If programming fails reverse dip switches (OFF to ON
and ON to OFF).
Chamberlain products:
For Chamberlain remotes DO NOT use the “0” position,
use “+” or “-”. If you already have a 3-button remote, DIP
switch #1 must be set to “-” if the large button is to open
the door. It may be necessary to reprogram original
remote controls.
114A3485
NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications
of this receiver and/or transmitter are prohibited, except for changing the code setting or
replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Programming complete.
Press selected button
to test.
www.clickerproducts.com • 1-800-442-1255
Chamberlain, LiftMaster and Moore-O-Matic are Trademarks of Chamberlain Group. Genie
is a Trademark of Overhead Door Corporation. Linear is a Trademark of Linear
Corporation. Stanley is a Trademark of The Stanley Works.
© 2007, Clicker Corporation
All Rights Reserved

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : 114A3485(3c)
Creator                         : krista Hartzell
Create Date                     : 2007:07:19 09:14:55-07:00
Modify Date                     : 2012:07:23 14:48:15-05:00
Creator Tool                    : QuarkXPress™: AdobePS 8.5.1
Metadata Date                   : 2012:07:23 14:48:15-05:00
Producer                        : Acrobat Distiller 8.1.0 (Macintosh)
Document ID                     : uuid:5f8de43a-315b-4f0d-8f7a-91150eca9466
Instance ID                     : uuid:41efa17d-96a0-4c0e-93f4-05c7dc3b1fd3
Part                            : 1
Conformance                     : B
Page Count                      : 1
Author                          : krista Hartzell

EXIF Metadata provided by EXIF.tools