Chamberlain Group The 8439 AXCL Operator User Manual Product Literature 20161004 v1 6 ACXL Manual 2

Chamberlain Group Inc, The AXCL Operator Product Literature 20161004 v1 6 ACXL Manual 2

Contents

Product Literature_20161004_v1 - 6 ACXL Manual_2

161Connect InternetThe controller can connect to the Internet with LAN (wired) or with Wi-Fi® (wireless). Make sure you are in the Admin Mode before you connect to the Internet. If you are not in Admin Mode, touch the upper left-hand corner of the display. Follow the instructions according to your application. PRE-INSTALL NETWORK PROGRAMMINGINSTALL ACCESS CONTROLINTRODUCTIONOn the display, select each tab in Admin Mode to validate setup (network, inputs, outputs, etc.). Once you have validated the setup, exit Admin Mode.Validate Setup2OPTION 1 Connect with LAN (wired)The Local Area Network (LAN) port is a 10/100 Ethernet interface with an RJ45 jack for connecting the controller to a LAN in order for it to gain connectivity to the Internet. Use a straight, (i.e., non-crossover) cable to connect to a local hub, switch or router. Connect the Power/Internet Board to a LAN functionality is a supplementary feature.1.   Connect an Ethernet cable from your LAN to the LAN port on the Power/Internet Board. When connected properly, the green and amber LED on the Ethernet port will light/fl icker. If the green LED is not lit, check the connections on the controller and the Ethernet hub. 2.   On the display, select Wired Network if dynamic confi guration (DHCP) is desired or select Manual Setup for a static IP address.OPTION 2 Connect through Wi-Fi® (Wireless)1.  On the display select Wi-Fi Network.2.  Select the network the controller will use.3.  Enter the password for the network.4. Select Login.ONLANon Internet/Power BoardFerrite Core

Navigation menu