Chamberlain Group The 8628 Models 821LMB-SENSOR and MYQ-G0302 Door Sensor User Manual 114A4991 indd

Chamberlain Group Inc, The Models 821LMB-SENSOR and MYQ-G0302 Door Sensor 114A4991 indd

Exhibit D Users Manual per 2 1033 b3

Download: Chamberlain Group The 8628 Models 821LMB-SENSOR and MYQ-G0302 Door Sensor User Manual 114A4991 indd
Mirror Download [FCC.gov]Chamberlain Group The 8628 Models 821LMB-SENSOR and MYQ-G0302 Door Sensor User Manual 114A4991 indd
Document ID3393245
Application IDDduZmJ8xl5p40y9s7e50fw==
Document DescriptionExhibit D Users Manual per 2 1033 b3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize9.07kB (113426 bits)
Date Submitted2017-05-16 00:00:00
Date Available2017-05-16 00:00:00
Creation Date2017-03-13 12:48:42
Producing SoftwareAcrobat Distiller 15.0 (Macintosh)
Document Lastmod2017-03-21 13:30:13
Document Title114A4991.indd
Document CreatorAdobe InDesign CC 2017 (Macintosh)
Document Author: aangulo2

DOOR SENSOR
MODELS MYQ-G0302, 821LMB-SENSOR
AND 041D8726
INSTALL THE DOOR SENSOR
Install with Fastening Strips
1. Remove the pull tab from the door sensor to activate the
battery.
To reduce the risk of SEVERE INJURY to persons:
• DO NOT enable the SMART GARAGE™ HUB or the MyQ® Garage if
operating either one-piece or swinging doors. To be enabled ONLY
on a sectional door.
2. Position the door sensor vertically and attach to a clean,
dry location on the top panel of the garage door with
fastening strips (provided).
Top Panel
of Garage
Door
OR
Install with Screws
1. Press in the bottom of the door sensor and remove the
front cover.
Top
Fastening
Strips
OR
Front
Cover
Door
Sensor
AF
2. Remove the pull tab from the door sensor to activate the
battery.
Top Panel
of Garage Door
Screws
3. Position the door sensor vertically and attach to the top
panel of the garage door with screws (provided).
4. Replace the front cover.
PROGRAM THE DOOR SENSOR
1. Use the MyQ® App to add a new door sensor.
OR
1. Press and release BUTTON 1 for door 1 or BUTTON 2 for
door 2 on the Wi-Fi Hub. The yellow LED will turn solid.
Wi-Fi Hub
BUTTON
(Settings)
Door Sensor
BUTTON 1
DR
2. Press the Test BUTTON on door sensor until the red LED
on the door sensor turns on. The yellow LED on the Wi-Fi
Hub will turn off when successfully programmed.
BUTTON 2
3. Press the Test BUTTON again on the door sensor and the
Wi-Fi Hub will beep once for door 1 and twice for door 2.
LED
Test BUTTON
TEST DOOR SENSOR
Test your door sensor every 6 months or if the MyQ system
is not working as expected.
ONE YEAR LIMITED WARRANTY
1. Press the test BUTTON on the door sensor, the LED on the
door sensor should flash and the Wi-Fi Hub should beep.
The Chamberlain Group, Inc. warrants to the first consumer purchaser of
this product that it is free from defect in materials and/or workmanship
for a period of 1 year from the date of purchase.
2. Perform this test 6 times. If the LED doesn’t flash or the
Wi-Fi Hub doesn’t beep each time, replace the battery in
the door sensor with a CR2450 battery.
DOOR SENSOR COMPATIBILITY
Visit www.LiftMaster.com/door-sensor or
www.chamberlain.com/door-sensor to see which products
are compatible with this door sensor.
114A4991
NEED HELP?
Go to the Help section at www.mychamberlain.com or
www.myliftmaster.com, or call Chamberlain Technical Support at
1-800-528-9131.
This device complies with Part 15 of the FCC rules and IC RSS-210. Operation
is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
©2017 The Chamberlain Group, Inc.
All Rights Reserved

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : aangulo2
Create Date                     : 2017:03:13 12:48:42-07:00
Modify Date                     : 2017:03:21 13:30:13-05:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Creator                         : aangulo2
Title                           : 114A4991.indd
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Metadata Date                   : 2017:03:21 13:30:13-05:00
Producer                        : Acrobat Distiller 15.0 (Macintosh)
Document ID                     : uuid:8486bd21-2699-b743-870e-9398223fb672
Instance ID                     : uuid:9aedfdba-a3c2-49ac-b0b6-91a6447904a7
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: HBW8628

Navigation menu