Chamberlain Group The TCTX120 Garage Door Remote Control User Manual Instruction sheet

Download:
Mirror Download [FCC.gov]
Document ID	69398
Application ID	Y60Vk6+Uj2B1REPoPPfgJg==
Document Description	Instruction sheet
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.95kB (224422 bits)
Date Submitted	1999-11-12 00:00:00
Date Available	1999-11-29 00:00:00
Creation Date	1999-11-13 09:37:12
Producing Software	Acrobat 3.0 Scan Plug-in
Document Lastmod	1999-11-13 09:37:42
Document Title	Instruction sheet
Document Creator	Acrobat 3.0 Scan Plug-in

7 W/ML wsrmrm/ Tc moo
Lift-Mastem
The Professional Line
To comply with FCC rules, adjustment or modification oi receiver and/or
transmitter is prohibited, except ior changing the code setting and
replacing the battery, THERE ARE NO OTHER USER SERVICEAELE
PARTS.
children operating or playing with a garage door opener
can injure themselves or others. The garage door could
close and cause serious In/ury or death. Do not allow
children to operate the wall push button(s) or remote
control(s).
A moving garage door could ln/ure or kill someone
under It. Activate the opener only when you can see the
door clearly, it Is tree at obstructions, and Is properly
adjusted.
The push buttons on the 2»Channel remote controls can
activate garage door openers, entryways and/or light controls.
(Instructions ior programming light products are included with
those accessories.)
In general, code switch remote controls are used when
several persons are operating the same device. Code
switches must be set to matching positions in all remote
controls used to operate the same receiver. Use the
“smooth“ push button, as shown In Figure 1, exclusively
for code switch application. Follow the instructions
described and shown below.
Figure 1
Green
Test Light
Select Remote
Access the code switches in the 2-Channel remote(s) as
lollows:
- Slide back the battery compartment cover on the bottom oi the
remote control housing.
Figure 2
Match
Oodo
Switches
(F9)
- Place remote circuit boards side by side. Make sure you set
code switches 1 through 9 in all remotes to matching positions
(see Figure 2). Use a pen or a screwdriver to move the
switches to (+). (-) or (O).
- Replace the battery compartment cover,
Model a!!! 2-Channel Remote Control
OWNER’S MANUAL
Program Receiver to Match Remote Control Code:
Each receiver must be programmed to accept the code of
the remote push buton that will be used to operate the
device. When several remotes will operate the same device,
It is only necessary to use the "smooth" push button of one
remote to program the receiver.
Select a remote control push button to operate the receiver.
- Press and HOLD the selected push button. Figure 1.
- Then press the “SMART“ button on receiver panel. Figure 3.
The green indicator light will FLASH once, Release the remote
control push button.
Now the device will operate with the selected remote push button.
NOTE: It the remote push button Is not held down until the
indicator light flashes, the receiver has not accepted the
code.
Figure 3
Representative Receiver
with "SMART" Button
Green
‘Smart'
Button
Green
indicator Light
To Erase All Remote Codes:
Press and hold the ‘Smarl” button on the receiver until the
indicator light turns off (about 6 seconds).
All the codes the receiver has learned will be erased.
Follow code switch setting instructions and reprogram
receiver as described above.
The Remote Control Battery:
The green lest light should glow and the device should operate
when the remote is activated.
The 12V battery should produce power ior at least a year. it the
green test light is dim or does not come on, replace the battery.
To change the battery. slide back the battery compartment
cover. Position the new battery as indicated. Replace the
battery compartment cover.
You can attach the remote control to the visor at your car Wlth
lhe clip provided, ii desired. fl VlSOi Clip
Replacement Parts
Remote case only. . AIAIIGBO
(circuit board not included)
12V battery
Visui Clip...
For service, dial our toll-free number: 1-800—528-9131
©1994. Chamberlain Group, Inc.
All Rights Reserved
Printed in MEXICO

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 1999:11:13 09:37:42
Creator                         : Acrobat 3.0 Scan Plug-in
Producer                        : Acrobat 3.0 Scan Plug-in
Create Date                     : 1999:11:13 09:37:12
Page Count                      : 1

EXIF Metadata provided by EXIF.tools