Chamberlain Wireless KPD1 Wireless Keypad Interface User Manual OWK 10 8
Chamberlain Wireless Products Inc. Wireless Keypad Interface OWK 10 8
user manual
Oracle limited LIFETIME WARRANTY Oracle Wireless Keypad International Electronics Inc. (IEI) warrants this product to be free of defects in materials and workmanship, for its usable lifetime. For a period of ONE YEAR following purchase, IEI will repair or replace the product free of charge, including parts, labor, return shipping to you, and handling. After the initial one year of operation, the limited lifetime warranty will cover parts, labor, and return shipping to you, with a minimal handling charge specific to the product, as listed below: Gate Access Panel (with Keypad): Gate Controller Unit: Key-fob Remote: Outdoor Intercom (no keypad): $55.00 $30.00 $10.00 $35.00 Oracle Flush Mount Intercom: Telephone Interface unit: Repeater System: Oracle Portable Intercom: (TM) Thank you for purchasing the Oracle Wireless Keypad. This product has been designed and manufactured in the USA, utilizing the highest quality standards available. No Wiring or Trenching Required $20.00 $40.00 $40.00 $20.00 INSTALLER: If you have installation questions, please contact your Distributor. CONSUMER BEFORE INSTALL: If you have questions, please contact your Installer. CONSUMER AFTER INSTALL: If you have operation questions or are in need of warranty service, please contact our Product Support department by email at techsupp@nwlink.com or call 360-254-1564 Tuesday-Friday 7-5 Pacific Time. If the issue is not resolvable, a manufacturer’s warranty repair order may be issued. To have the product(s) sent for warranty service. A Return Authorization number will be issued for warranty service, which must be put on the outside of the package, to be received and handled properly. Packages for warranty service may be sent to the following address. Packages with no RA# may not be accepted. IEI 5913C NE 127th AVE, Suite 800 Vancouver, WA 98682 Please include a note describing the problem that you are having and a copy of your original sales receipt (within the first year). If the warranty service is outside the first year, please include a check made out to IEI, based on the list of handling fees, shown above. Please note that you may need to send multiple units for warranty service, testing, and upgrading, though only the applicable fee for handling the failed unit(s) will be charged. Please allow 2-4 weeks for service and return shipping. If an EXPEDITED repair/replacement is requested, a 100% surcharge applies. In this case, please write EXPEDITED after the RA number. IEI will attempt to return expedited repair orders within one week, except during holidays. All repairs or replacements are at the discretion of the Manufacturer. This warranty excludes items that have been abused, altered, incorrectly installed, or repaired by an unauthorized person. Changes or modifications not expressly approved by the Manufacturer could void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. This warranty is limited to the product only. No consequential damages are covered. • • • • • • • • • • Controls up to four Gate Openers or other accessories Multiple Control Modes Proximity Detector with Backlit key-pad after dark Echo Confirmation Feedback Up to 2 years on 4xAA batteries Multiple Power Saving Modes Temporary one-time use/24 hour PIN numbers Use Several Keypads together in Multi-Keypad Mode Use Alternate Channel Groups to overcome interference Oracle Wireless Keypad (OWK) has 2 models: OWK5 – 5 Pin Codes OWK250 – 250 Pin Codes This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. International Electronics, Inc. FCC ID: JLFKPD1 IC: Country Of Origin: USA Made With Pride In the USA. A manufacturer’s Limited Lifetime Warranty covers this product. Model OWK 9/6/2007 Patents Pending - 16 TABLE OF CONTENTS Preface General Information………………………………………………………….…….……....3 Parts Supplied………………………………………………………..……………….……3 -1FREQUENTLY ASKED QUESTIONS AND TROUBLESHOOTING Why won’t the Wireless Keypad accept a PIN number? The Wireless Keypad Unit will not learn a PIN # if it is the same number as the factory’s reset code. Section 1 – Installation 1.1 1.2 Installing the Oracle Wireless Keypad (OWK)…………………..……….....3 Initializing a new Master Pin Number………………………….………..……3 Section 2 – Gate Control Unit (GCU) Installation 2.1 2.2 2.3 Installing the batteries……………………………………………..…….….…4 Setting the GCU identity……………………………………….………….......4 Installing the GCU…………………………………………………………......5 Section 3 – Activating The Gate Control Unit (GCU) Activating a GCU………………………………..……………..……………………..……5 Section 4 – General Operation Opening a gate………………..…………………………………………………...………6 Section 5 – Pin Codes 5.1 5.2 5.3 5.4 User-level PIN numbers……………………………………………….….…..6 Removing User-level PIN numbers………………………………….….……6 Temporary User PIN numbers...………………………………..……….……7 Changing the Master PIN number………………………………..…….…….7 Section 6 – Oracle Wireless Keypad (OWK) Settings 6.1 6.2 OWK Keypad Brightness………..……………………………………….……7 Alternate Channel Group…………………………………………………..….8 Section 7 – Operating Modes 7.1 7.2 7.3 7.4 7.5 Multi-Keypad (OWK) Mode……………..…………………………..…………8 Multi-Keypad Default GCU Setting……………………………………..…….9 Party Mode……………………………………………………………..……….9 Vacation Mode………………………………………………………..………...9 Power-Save Mode……………………………………………………..……..10 Section 8 – Types of Batteries Used Batteries……………………………………………………………………………..…….10 Section 9 – Quick List of Functions Quick list of functions……………………………………………………………..………10 Section 10 – Appendix A Detailed GCU Installation Instructions………………………………………………….11 Section 11 – Frequently Asked Questions and Troubleshooting FAQ’s and Troubleshooting…………………………………………………...…………15 Why won’t my new gate controller work? Make sure that it was taught to the Wireless Keypad Unit (see Activating a new Gate Controller). If you hear a four-beep error tone, the Wireless Keypad Unit did not mate with the Gate Controller. If the Gate Controller is #2, 3, or 4, make sure that the corresponding ID is set with dipswitches 1&2, in the Gate Controller (See Basic Gate Control Unit Installation) I need the Manufacturer’s Reset Code; to reset my Wireless Keypad Unit The Wireless Keypad Unit’s serial number is printed on the inside of the Wireless Keypad Unit’s mounting plate. Call our Product Support staff at 888.679.7994, for the reset code. You MUST have the Wireless Keypad Unit’s serial number handy, to receive the reset code. Simply enter the reset code on the Wireless Keypad Unit’s keypad and after one minute, the unit will clear its memory and you may re-teach the Keypad System. Why do I hear a warbling two-tone error sound when I activate a Gate Controller? The Wireless Keypad Unit is not communicating with the GCU. The GCU may be out of range. If the units work properly when close together, the GCU may need to be mounted higher off the ground or on a different surface. Metal, trees, or masonry cause the most interference. If the units do not work when close together, the Wireless Keypad Unit has not mated with that GCU. Double-check the GCU’s ID (as set with dipswitches 1 ? 2, and re-teach it. My Oracle System Network has very short range Short transmission range is usually related to interference. If there is a conflicting 900-MHz radio transmitter near-by, you may need to have the Oracle Wireless Keypad Unit use an alternate group of channels. See: Alternate Channel Group Selection. Stucco: When used in a dwelling with stucco or cement walls, the RF range is reduced greatly. The Oracle Repeater will solve this issue. Place the repeater close to the house to mitigate this problem. Model OWK 9/6/2007 Patents Pending -2- Sample Configuration 3: Open, Close Gate and Verify Gate Status Use this configuration when you wish to use the Reporter Gate System to open and close your gate and check the gate’s actual status, connecting the Gate Controller to a limit switch or external gate status indicator. - 15 GENERAL INFORMATION Utilizing Universal's newest wireless protocols, this keypad product line is able to meet and exceed the most stringent security and environmental requirements. Ultra long Range, Low Power Usage and its Two Way design, which provides Confirmation Feedback of Receiver Action make this system the most robust available. PARTS SUPPLIED Enable or disable the Auto-close feature on your Automatic Gate Opener. Connect Reporter Gate Controller Contacts 7 and 8 to “Strike Open”, “Open Only”, “Remote” or a similarly named contact pair on your Automatic Gate Opener. Please refer to your product-specific manual for wiring information. Connect Contact 2 to Ground, COM, or (-) on your Automatic Gate Opener. 1 - Oracle Wireless Keypad (OWK) 1 – OWK Mounting Kit which includes: 4 – ¼ x 1 Steel Screws 4 – ¼ Washers 4 – ¼ Lock Nuts 4 – 8-32 X 1 5/8 Black Socket Assembly Screws 1 – Hex Key Flip Gate Controller Dipswitch #3 to the UP position to enable status checking. If your Automatic Gate Opener has a “Close” or “Close Only” contact pair (e.g. connecting like a 3-button station), connect Contacts 5 and 6 to the “Close” contacts and flip Gate Controller Dipswitch #5 to the UP position. If desired, enable Auto-close on the Gate Controller by flipping Gate Controller Dipswitch #6 to the UP position. If you use this feature, disable auto-close on your Automatic Gate Opener. Connect terminals #3 and #4 across the “Gate Closed” limit switch. Polarity does not matter. ORACLE WIRELESS KEYPAD (OWK) INSTALLATION 1.1 INSTALLING THE OWK The Oracle Wireless Keypad Unit has been designed specifically for easy installation. After determining where you want the Wireless Keypad Unit (OWK) to be mounted, just fasten the back panel to a post or solid surface, using the included OWK mounting kit, making sure that is within easy reach of a visitor. Place four ‘AA’ batteries in the OWK’s battery pack. You will hear a periodic low-volume beep, indicating that the unit is operational and ready to be programmed with your secure master PIN number. For longer battery life and better functionality, use lithium ‘AA’ batteries. Install the front of the Wireless Keypad Unit onto the already installed mounting plate, using the included Assembly screws and hex key provided. 1.2 INITIALIZING A NEW MASTER PIN NUMBER The beeping you hear is the OWK prompting you to enter a new Master Pin Number. On the Keypad, press: # # # Followed by your four digit Master PIN Number (for example): 1 2 3 4 A tone indicates that the unit has accepted your Master PIN Number. Note: Is a ‘Cancel’ button to cancel any call or key sequence.Model OWK 9/6/2007 Patents Pending - 14 - GATE CONTROL UNIT (GCU) INSTALLATION 2.1 INSTALLING THE BATTERIES Open the GCU by holding the box/shell portion of the unit. Then, while tilting the bottom section (where the wire is located), pull the box/shell off. Insert 4 ‘AA’ batteries into the exposed battery holder. Note: If used in locations that will be below -10°C (20°F), Lithium batteries are recommended. Note: Leave the box/shell off until after activation is complete. 2.2 SETTING THE GATE CONTROLLER IDENTITY You can use up to 4 GCU’s with each OWK utilized. If you use more than 1 GCU, the additional units must have their identity set. Changing dipswitches #1 & #2 on the Gate Control Unit sets the Gate Controller Identity. (See below.) GCU ID SW1 SW2 off off on off off on on on Note: To set the identity of GCU #2, you would position the dipswitches as seen below. Dipswitch Block Note: Is a ‘Cancel’ button to cancel any call or key sequence. -3- Sample Configuration 1: Open Gate Only Use this configuration when you wish to use the Reporter Gate System as an open-only system, which automatically closes, based on a timer or a magnetic loop. Enable the Auto-close feature on your Automatic Gate Opener. Connect the Reporter Gate Controller as shown in the Basic Gate Controller Installation diagram. Please refer to your product-specific manual for wiring information. On the Reporter Intercom, disable gate status checking (as described above). Sample Configuration 2: Wiring to separate OPEN and CLOSE terminals Use this configuration when you wish to use the Reporter Gate System to open and close your gate and check the gate’s last known status, without connecting to a limit switch or external gate status indicator. Disable the Auto-close feature on your Automatic Gate Opener. Connect Contact 2 to Ground, COM, or (-) on your Automatic Gate Opener. LED Connect Reporter Gate Controller Contacts 7 and 8 to “Strike Open”, “Open Only”, “Remote” or a similarly named contact pair on your Automatic Gate Opener. Please refer to your product-specific manual for wiring information. Learn Button If your Automatic Gate Opener has a “Close” or “Close Only” contact pair (e.g. connecting like a 3-button station), connect Contacts 5 and 6 to the “Close” contacts. Terminal Slide Gate Controller Dipswitch #5 to the UP position. If desired, enable Auto-close on the Gate Controller by flipping Gate Controller Dipswitch #6 to the UP position. Model OWK 9/6/2007 Patents Pending -4Selecting Gate Controller “ON” Time For most connections to an Automatic Gate Opener, the default setting of ½ second is best. However, for connection to yard lights, cameras, etc., you may wish to adjust how long the connected device stays on. Gate Controller “ON” Time ½ second – No Limit Switch ½ second – Using a Limit Switch 10 seconds 30 seconds Dipswitch #3 OFF Dipswitch #4 OFF ON OFF OFF ON ON ON - 13 2.3 INSTALLING THE GATE CONTROL UNIT (GCU) Mount the Oracle Gate Controller near your Automatic Gate Opener’s control panel or motor. Most gate motors have simple relay connections (often labeled COMMON and CYCLE) that connect to the two large OPEN/CLOSE relay outputs on the Oracle Gate Controller. Note: For more detailed installation information, refer to Appendix A on pg. 15. NOTE: For most gate system wiring, dipswitch #4 should be left “OFF.” If you wire your gate controller to a limit switch, dipswitch #3 should be turned “ON”. Enabling the Auto-Close Feature By enabling the Auto-Close feature, the Gate Controller will attempt to close the gate 45 seconds after it is opened. This feature will work better if your configuration has at least one of the following elements: Separate Open / Close Terminals, A “Gate Closed” Sensor or limit switch, or A “Gate Open” Sensor or limit switch Otherwise, the Gate Controller must assume that the gate has not opened or closed for any other device. Auto-Close Feature OFF (disabled) ON (enabled) Dipswitch #6 OFF ON Within 20 seconds, on the GAP, Enter your Master PIN Number (for example): Warning: Please remember safety! Do not enable auto-close where it might pose a risk of entrapment, causing injury, death, or damage to vehicles. Using Additional Contact / Clearance Sensors Open/Closed Contact Sensors Dipswitch #3 Dipswitch#7 No contact sensors used OFF OFF “Closed” limit switch wired to ON OFF terminals #3 and #4 3.0 ACTIVATING A GATE CONTROL UNIT (GCU) When you are ready to activate the GCU, press the LEARN button on the GCU (see page 4 for location of the LEARN button), for one second. The LED will light up solid for up to 20 seconds. Dipswitch#8 Followed by the Gate Controller’s Identity: 1 2 3 4 (1 - 4) The GAP will give a double-beep and the GCU LED will blink 3 short blinks to indicate a successful activation. OFF OFF “Open” limit switch wired to terminals #3 and #4 ON ON OFF Additional “Closed” limit switch or sensor wired to terminals #3 and #4 ON OFF ON Additional “Opened” limit switch or sensor wired to terminals #3 and #4 ON ON ON NOTE: To power an additional contact sensor that is NOT already connected to your gate system, short terminal #3 to ground, connects the switch across terminals 3 and 4, and turn dipswitch #8 ON. Note: If the GAP sounds a 4-beep error tone or the GCU gives 3 double blinks, then check the FAQ section for the possible solution. If you only have one GCU then you are finished and can proceed to the next step. For additional GCU’s, repeat the process until all GCU’s have been successfully activated. Note: You can now assemble the GCU by snapping the box/shell back onto the unit. Model OWK 9/6/2007 Patents Pending - 12 4.0 OPENING A GATE To open a gate from the OWK, enter any valid PIN number. With multiple GCU’s, enter the PIN number followed by the GCU identity (1-4). -5APPENDIX A - DETAILED GCU INSTRUCTIONS PIN NUMBERS 5.1 USER-LEVEL PIN NUMBERS The Wireless Keypad can support up to 5 PIN numbers with the OWK5 or up to 250 PIN numbers with the OWK250, for other users. To add an additional PIN number, on the OWK: Enter your Master PIN Number (for example): 1 Followed by: 2 3 4 "BEEP" Enter a new PIN number (for example): 4 3 2 1 To limit the new PIN number to a single GCU, enter the PIN number followed by the GCU identity (1-4), resulting in a five digit PIN number. The OWK will give a single beep as the new PIN number is accepted. 5.2 REMOVING USER-LEVEL PIN NUMBERS To remove an additional PIN, on the OWK: Enter your Master PIN Number (for example): 1 2 3 4 Followed by: Press: From left to Terminals are: Enter the PIN number you want to remove (for example): Controller Optional power input. +9Vto +24VDC. Make sure that your gate’s DC power supply “Ground” is wired to terminal 2. − Ground or Common terminal. − Limit switch input A. Wire such that when the limit switch is closed, terminal 4 is shorted to terminal 3. − Limit switch input B. Wire such that when the limit switch is closed, terminal 4 is shorted to terminal 3. − Secondary Relay Contact A. Up to 120VAC LOW CURRENT contact. Max ½ amp. Typically wired to optional “Close Gate” input on Automatic Gate Opener. − Secondary Relay Contact B. Up to 120VAC LOW CURRENT contact. Max ½ amp. Typically wired to optional “Close Gate” input on Automatic Gate Opener. − Primary Relay Contact A. Up to 120VAC. Max 10 amps. Typically wired to “Open Gate”, “Open/Close” or “Remote” input on Automatic Gate Opener. − Primary Relay Contact B. Up to 120VAC. Max 10 amps. Typically wired to “Open Gate”, “Open/Close” or “Remote” input on Automatic Gate Opener. 4 3 2 1 The OWK will give a double beep indicating the PIN has been removed or a triple beep indicating a PIN has been entered that does not exist. The Master PIN cannot be deleted. Gate − "BEEP" # # # right, Model OWK 9/6/2007 Patents Pending -6POWER-SAVE MODE 7.5 Power-Save Mode will increase battery life by reducing power consumption and limiting some features. (See NOTE below.) In Power-Save mode, the keypad will only light up when a key is pressed. To enter Power-Save Mode: Enter the Master PIN Number (for example): Followed by: 0 3 To issue a temporary PIN number, on the OWK: Enter your Master PIN Number (for example): 1 Followed by: 5 1 1 2 3 4 0 4 2 3 4 "BEEP" Enter the temporary PIN number (for example): To exit Power-Save Mode: Enter the Master PIN Number (for example): Followed by: 1 2 3 4 - 11 5.3 TEMPORARY USER PIN NUMBER A temporary PIN number can be issued with an OWK5 (6 for an OWK250), for a 1 time only use, within a 24 hour time period. 4 3 2 1 To limit the new PIN number to a single Gate Controller, enter the PIN number followed by the Gate Controller ID (1-4) that it will access, resulting in a five digit PIN number. The Wireless Keypad Unit will give a single beep as the new PIN Number is accepted. 8.0 BATTERIES The Gate Controller uses four ‘AA’ batteries. The average life of the Gate Controller’s batteries is a year-and-a-half, depending on use. The Wireless Keypad Unit uses four ‘AA’ Alkaline batteries. The average life of the Wireless Keypad Unit’s batteries is a year with all functions enabled. Enabling Power-save Mode can extend the battery life up to two years. 5.4 CHANGING THE MASTER PIN NUMBER To change the Master PIN Number, on the OWK: Enter the existing Master PIN Number (for example): Followed by: Press: 0 9 "BEEP" # # # Enter the NEW Master PIN Number (for example): QUICK LIST OF FUNCTIONS Enable OWK Learn Mode Add User-Level PIN numbers Add User-Level PIN numbers w/GCU restrict Add a Temporary PIN number Add a Temporary PIN number w/GCU restrict Removing PIN numbers Change the Master PIN number OWK Brightness Control Place GAP in Multi-GAP Passive Mode Default GCU #3 to the Passive OWK Default GCU #4 to the Passive OWK Place OWK back to Active Mode Party Mode Vacation Mode Exit Vacation Mode Power-Save Mode Exit Power-Save Mode Alternate Channel Set PIN 05 PIN 9 PIN PIN 9 PIN (1-4) PIN 51 PIN PIN 51 PIN (1-4) PIN 7 ### PIN PIN 09 ### PIN PIN 08 (1-3) PIN 56 PIN 58 PIN 59 PIN 57 PIN 54 PIN 52 PIN 53 PIN 03 PIN 04 PIN 55 (1-3) 1 2 3 4 4 3 2 1 The Wireless Keypad Unit will give a single beep as the new PIN Number is accepted. ORACLE WIRELESS KEYPAD (OWK) SETTINGS 6.1 OWK KEYPAD BRIGHTNESS When it is dark out, the Wireless Keypad Unit uses an Infrared proximity sensor to light up the keypad when you come within five feet of it or when a button is pressed. This feature is disabled in Power Save Mode (see Power-save Mode). To brighten or dim, on the OWK: Enter the Master PIN Number (for example): Followed by: Enter: 1 2 3 4 0 8 1, 2, or 3 The Wireless Keypad Unit will give a single beep as the new level is accepted. The default level is 2. Model OWK 9/6/2007 Patents Pending - 10 6.2 ALTERNATE CHANNEL GROUP SELECTION The OWK can be set to one of three alternate operating channel groups, to overcome range-reducing interference from conflicting radio transmitters. To alternate operating channel groups, on the OWK: Enter the Master PIN Number (for example): Followed by: 7.2 A Passive OWK defaults to activating GCU #2 (See Basic Gate Control Unit Installation) when it is activated by a PIN code entered on that keypad. To have the Passive OWK activate GCU #3, on the Passive unit: Enter the Master PIN Number (for example): 2 3 4 1 2 3 4 5 5 Followed by: Enter: -7MULTI-OWK DEFAULT GCU SETTING 1, 2, or 3 The Wireless Keypad Unit will give a single beep as the new channel group is accepted. The default setting is channel group 1. 5 8 To have the Passive OWK activate GCU #4, on the Passive unit: Enter the Master PIN Number (for example): 1 2 3 4 Followed by: 5 9 OPERATING MODES 7.1 MULTI-KEYPAD (OWK) MODE A Wireless Keypad Unit (OWK) can be set to Passive Mode, to work with multiple Wireless Keypad Units (at a second entrance for example). The Passive OWK will become an accessory to the Active OWK. Note: Both steps 1 & 2 must occur within 2 minutes of each other. 1. On the OWK to be set to Passive: Enter the Master PIN Number (for example): Followed by: 5 6 0 5 To enter Party Mode, on the Active OWK: Enter the Master PIN Number (for example): Followed by: 2. On the OWK to be set to Active: Enter the Master PIN Number (for example): Followed by: 1 2 3 4 7.3 PARTY MODE To keep your gate open during a party or other activity, so the gate won’t have to open with the arrival of each guest, you can set the Wireless Keypad Unit to keep the gate open, until it is cycled closed. To use this setting, the Gate Control Unit MUST be connected to an external +12 Volt power supply. 1 2 3 4 "BEEP" Note: If the Passive OWK doesn’t learn the network code, it will give an error tone and return to Active mode. At any time to exit Passive Mode and return a OWK to Active mode, enter the Master PIN number, followed by “57”. 1 2 3 4 5 4 To close the gate and exit Party Mode, cycle the gate by entering a PIN number or by pressing the button on a Remote or Intercom. 7.4 VACATION MODE If you are going to be gone for an extended length of time, the unit can be put into a Deep Sleep mode to conserve power and will only respond to the Master PIN number being entered on the Wireless Keypad Unit. To enter Vacation Mode: Enter the Master PIN Number (for example): Followed by: 5 2 To exit Vacation Mode: Enter the Master PIN Number (for example): Followed by: 1 2 3 4 1 2 3 4 5 3 Model OWK 9/6/2007 Patents Pending
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-701 Create Date : 2007:09:06 10:54:01Z Creator Tool : PScript5.dll Version 5.2 Modify Date : 2007:12:14 14:02:22-08:00 Metadata Date : 2007:12:14 14:02:22-08:00 Format : application/pdf Creator : Eng Title : OWK 10-8.xls Producer : GPL Ghostscript 8.15 Document ID : uuid:3931edfa-031a-48af-b4a4-64855060b805 Instance ID : uuid:92e74d90-3404-497c-800a-3cf18932f0ee Has XFA : No Page Count : 8 Author : EngEXIF Metadata provided by EXIF.tools