Chamberlain 3595C 3 4 Hp Users Manual 114A3401B ENFR

2015-01-25

• English
  • Model 3595C 3/4 HP
  • TABLE OF CONTENTS
  • INTRODUCTION
    • Safety Symbol and Signal Word Review
    • Preparing your garage door
    • Tools needed
    • Planning
    • Carton Inventory
      • INSTALLATION HARDWARE
  • ASSEMBLY
    • Attach the Rail to the Motor Unit
    • Attach the Chain Spreader
    • Attach the Chassis Support Bracket
    • Tighten the Chain
  • INSTALLATION
    • Determine the Header Bracket Location
    • Install the Header Bracket
    • Attach the Rail to the Header Bracket
    • Position the Opener
    • Hang the Opener
    • Install the Door Control
    • Install the Light
    • Attach the Emergency Release Rope and Handle
    • Electrical Requirements
    • Install The Protector System®
      • INSTALLING THE BRACKETS
      • MOUNTING AND WIRING THE SAFETY REVERSING SENSORS
    • Fasten the Door Bracket
    • Connect Door Arm to Trolley
  • ADJUSTMENT
    • Adjust the UP and DOWN Travel Limits
    • Adjust the Force
    • Test the Safety Reversal System
    • Test The Protector System®
  • OPERATION
    • Using Your Garage Door Opener
    • Using the Wall-Mounted Door Control
    • Using the Remote Control
    • The Remote Control Batteries
    • Troubleshooting
    • To Open the Door Manually
  • CARE OF YOUR OPENER
    • Having a Problem?
    • Having a Problem? (Continued)
    • Smart Control Panel™ Messages
  • PROGRAMMING
    • To Add or Reprogram a Hand-held Remote Control
    • To Erase All Codes From Motor Unit Memory
    • *3-Button Remotes
    • To Add, or Reprogram or Change a Keyless Entry PIN
  • REPAIR PARTS
    • Rail Assembly Parts
    • Installation Parts
    • Motor Unit Assembly Parts
  • ACCESSORIES
  • LIFTMASTER SERVICE IS ON CALL
  • HOW TO ORDER REPAIR PARTS
  • WARRANTY
• French