Chamk lnorated RFTSERIES WRISTBAND TAG User Manual

Champtek lncorporated WRISTBAND TAG Users Manual

Users Manual

Download: Chamk lnorated RFTSERIES WRISTBAND TAG User Manual
Mirror Download [FCC.gov]Chamk lnorated RFTSERIES WRISTBAND TAG User Manual
Document ID1163974
Application IDcijCG2LGq5wXBtMZr8yXJA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize49.36kB (617036 bits)
Date Submitted2009-09-03 00:00:00
Date Available2009-09-04 00:00:00
Creation Date2009-07-30 16:57:24
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2009-07-30 14:18:19
Document TitleMicrosoft Word - RFT500 433Mhz Wristband Tag User Manual-1_Rev.3_.doc
Document CreatorPScript5.dll Version 5.2
Document Author: eva_kao

User Manual – RFT500 433Mhz Wristband Tag
RFT500 433Mhz Wristband Tag
User Manual
Revision 01
User Manual – RFT500 433Mhz Wristband Tag
User Manual
Revision Date
Description
00
2009.1.15 Preliminary draft
01
2009.3.19
Copyright
Champtek may have patents, patent applications, trademark, copyrights,
or other intellectual property rights covering in this document. The
provision of this information does not grant you any license to these
patents, trademarks, copyrights, or other intellectual properties.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation of the device.
FCC Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications
Any changes or modification not expressly approved by the party
responsible could void the user's authority to operate the device.
User Manual – RFT500 433Mhz Wristband Tag
Introduction
RFT500 is wristband tag is designed to be worn around the wrist. The tag
can be used for people in the office or the hospital. The panic button on
the top can transmit an alarm to the backend service center and deal
with the accident or emergency right away.
Besides, RFT500 provides temperature monitoring and take‐off detection
function helpful to realize the situation of the wearer.
Regarding to the data collision, RFT500 uses two‐layer anti‐collision
technique, significantly reduce the loss rate than general product in the
market. Furthermore, friendly and easy setup function is flexible for
different application.
Features
User configurable transmission power
User configurable transmission period
Panic button
Wrist temperature detection
Take‐off detection
Low‐battery detection
Ultra‐low power consumption
Leading two‐layer anti‐collision technique
Water‐proof
Specification
Capabilities
Characteristic
Anti‐Collision
Operation frequency
Signal Strength
Transmission Range
Modulation
Panic button, Temperature detection, take‐off
detection
Two‐layer anti‐collision technique
433.92 Mhz
Default ‐5dbm
Max. 60m
GFSK
User Manual – RFT500 433Mhz Wristband Tag
Tag ID
Temp. Detection Range
Physical Characteristics
Length
Width
Height
Weight
Case
Environmental
Operation Temperature
Storage Temperature
Electrical
Power
Battery Life
999999 unique IDs
0℃ to 40℃
1.89”
1.24”
0.55”
18g
ABS + PC
‐20℃ to 70℃
‐40℃ to 80℃
CR2032 Coin Cell (replaceable)
Typical 2 years (at 25℃)
Mechanicals
TOP View
Panic Button – Press down will send emergency alarm back to reader.
Temperature sensor – Detect the wrist temperature
Take‐off detection – Detect if the wearer takes off the wristband
User Manual – RFT500 433Mhz Wristband Tag
Packet Format
Packet Format 1 (without temperature)
Head
Reader ID
Group
Tag ID
000000~999999
00
000000~999999
RSSI
End
Code
00~99
0x0d
0x0a
Status
(*)0~7
Packet Format 2 (with temperature)
Head
Reader
ID
Group
Tag ID
Status
Temp.
RSSI
End
Code
Same
00
Same
0~7
000~400(**)
00~99
0x0d
0x0a
(*)Status: 0 to 7 means hexadecimal 0x00 to 0x07 (Ex. 0x01 represents
the wristband is wearing, battery ok, and key pressed.)
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
0—Wearing
1—Taking off
0—Battery ok
1—Battery low
0—Normal
1—Key pressed
(**) Ex. 322 means 32.2℃
Implementation Notice
RFT500 only sends packet with temperature and check battery status
once per minute.
Battery life will decline faster under low temperature environment
due to the battery physical characteristic.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2009:07:30 16:57:24+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:07:30 14:18:19-04:00
Metadata Date                   : 2009:07:30 14:18:19-04:00
Format                          : application/pdf
Title                           : Microsoft Word - RFT500 433Mhz Wristband Tag User Manual-1_Rev.3_.doc
Creator                         : eva_kao
Document ID                     : uuid:3c2b406d-4802-4bf9-8098-0d23d4d0b0eb
Instance ID                     : uuid:ce213653-dbc8-445b-8d0f-7fbcda4e9922
Page Count                      : 5
Author                          : eva_kao
EXIF Metadata provided by EXIF.tools
FCC ID Filing: WOIRFTSERIES

Navigation menu