Chaney Instrument 01190TX Water Detector User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3980064
Application ID	2EdKzd23/wD6Sq8vk/Ge3Q==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	227.11kB (2838859 bits)
Date Submitted	2018-08-28 00:00:00
Date Available	2018-08-28 00:00:00
Creation Date	2018-02-27 09:25:32
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-08-17 13:50:58
Document Title	User manual
Document Creator	Adobe InDesign CC 2015 (Macintosh)

Instruction Manual
Water Detector
model 01190
Congratulations on your new AcuRite product. Protect your property from potential water damage
anywhere flooding is a potential danger.
Features & Benefits
FRONT
1.
2.
Alarm ON/OFF Switch
Moisture Indicator
3.
Wireless Signal Indicator
BACK
6.		 A-B-C Switch
If applicable, ID code that must match
Wireless Receiver’s A-B-C switch to ensure
units synchronize.
Indicates when moisture is detected.
If applicable, flashes when data is being
sent to Wireless Receiver.
4.
2.5-ft (.6m) Cord
5.
Sensor Contacts
Detect the presence of liquid.
7.
Integrated Hanger
8.
9.
Magnetic Backing
Battery Compartment
For easy placement.
10. Battery Compartment Cover
(not shown)
(262) 729-4850 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
SETUP
Water Detector Setup
Remove Battery
Compartment
A-B-C Switch
Set to match receiver
(if applicable).
Remove the battery compartment
cover.
If purchased with a Wireless
Receiver, set the A-B-C switch
located inside the battery
compartment.
You must select the same letter
choices for both the detector and
the receiver in order for the units to
synchronize.
ABC
Install Batteries
2 AA batteries
Insert 2 x AA batteries into the
battery compartment as shown.
Follow the polarity (+/-) diagram in
the battery compartment.
Instruction Manual
Water Detector Wireless Receiver
model 01191
Features & Benefits
4 5 6
FRONT
1. Moisture Indicator
Indicates when moisture
is detected.
2. Low Battery Indicator
3. Zz Button
Replace the battery cover.
Press and release to silence the
alarm for 1 hour. Press and hold
4 seconds to silence the alarm
for 24 hours.
BACK
4. Magnetic Backing
5.		A-B-C Switch
Using the Water Detector
The Water Detector works as a stand-alone unit which can be placed where leaks may occur and
has an audible alert when liquid is detected. It may also be used with a Wireless Receiver (sold
separately) which can be placed in a living area, ensuring that you hear the alert.
ID code that must match 		
Water Detector’s A-B-C switch
to ensure units synchronize.
Placement Guidelines
6. Integrated Hanger
Water will naturally flow towards the low point of the area that is beings monitored. For the best
results, place Water Detector in an area where water is most likely to collect.
You may place the Water Detector upright in the desired location (Figure A), or mount the base with
the wired sensor placed on ground level (Figure B).
NOTE: The sensor is water-resistant and is designed to detect the presence of liquid/leaks. However,
to extend it’s life, place the Water Detector in an area where it will not remain submerged in liquid.
FIGURE A
FIGURE B
ON
ON
(sold separately)
For easy placement.
7. Battery Compartment
8. Battery Compartment Cover
Receiver Setup
Remove the battery compartment cover.
Set the A-B-C switch located inside the
battery compartment.
You must select the same letter choices for
both the detector and the receiver in order
for the units to synchronize.
Insert 3 x AA batteries into the battery
compartment for the Receiver, as shown.
Follow the polarity (+/-) diagram in the
battery compartment.
Replace the battery cover.
OFF
OFF
Troubleshooting
WATER DE TEC TOR
Specifications
POWER
2 x AA alkaline batteries
WIRELESS RANGE
330 ft / 100 m (depending on home construction materials)
CORD
2.5 ft (.6m) length; Water-resistant
DATA REPORTING
1 second updates once water is detected
SOUND INTENSITY
85 dB at 3.3 ft (1 meter)
Problem
Possible Solution
Alarm does not sound,
even when there is
liquid
• Check that the batteries are installed correctly. Batteries may
need to be replaced.
• Make sure the Alarm ON/OFF switch on the Water Detector
is set to ON.
No Wireless Receiver
reception
If the wireless signal indicator does not flash:
• Relocate the Wireless Receiver and/or the Water Detector.
The units must be within 100 m (330 ft) of each other.
• Make sure the A-B-C switches on both units match.
3 x AA alkaline batteries
POWER
If your AcuRite product does not operate properly after trying the troubleshooting steps,
visit www.AcuRite.com or call (262) 729-4850 for assistance .
Customer Support
►
► Instruction Manuals
For assistance,
► Register your Product
► Support User Forum
► Replacement Parts
► Submit Feedback & Ideas
IMPORTANT
PRODUCT REGISTRATION
Register online to receive 1 year warranty protection
www. AcuRite.com
Limited 1-Year Warranty
We expressly disclaim all liability for special, consequential,
or incidental damages, whether arising in tort or by contract
from any breach of this warranty. Some states do not allow the
exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you.
forth herein. For purc hases of Chaney products, Chaney
We further disclaim liability from personal injury relating to
our products to the extent permitted by law. By acceptance of
any of our products, the purchaser assumes all liability for the
AcuRi te is a wholly owned subsidiary of Chaney
Instr ument Company. For purchases of AcuRite
We warrant that all products we manufacture under this
warranty are of good material and workmanship and, when
properly installed and operated, will be free of defects for a
period of one year from the date of purchase.
Any product which, under normal use and service, is proven
to breach the warranty contained herein within ONE YEAR
from date of sale will, upon examination by us, and at our sole
option, be repaired or replaced by us. Transportation costs and
charges for returned goods shall be paid for by the purchaser.
We hereby disclaim all responsibility for such transportation
costs and charges. This warranty will not be breached, and we
will give no credit for products which have received normal
wear and tear not affecting the functionality of the product,
been damaged (including by acts of nature), tampered,
abused, improperly installed, or repaired or altered by others
than our authorized representatives.
or corporation is authorized to bind us to any other obligation
or liability in connection with the sale of our products.
to modify or waive the terms of this warranty unless done in
writing and signed by a duly authorized agent of ours.
In no case shall our liability for any claim relating to our
products, your purchase or your use thereof, exceed the
original purchase price paid for the product.
Applicability of Policy
This Return, Refund, and Warranty Policy applies only to
purchases made in the United States and Canada. For
purchases made in a country other than the United States or
Canada, please consult the policies applicable to the country in
which you made your purchase.
Remedy for breach of this warranty is limited to repair or
replacement of the defective item(s). If we determine that repair
or replacement is not feasible, we may, at our option, refund
the amount of the original purchase price
Additionally, this Policy applies only to the original purchaser
of our products. We cannot and do not offer any return,
refund, or warranty services if you buy products used or from
resale sites such as eBay or Craigslist.
THE ABOVE-DESCRIBED WARRANTY IS THE SOLE WARRANTY
FOR THE PRODUCTS AND IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. ALL OTHER WARRANTIES
OTHER THAN THE EXPRESS WARRANTY SET FORTH HEREIN
ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTY OF MERCHANTABILITY
AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE.
This Return, Refund, and Warranty Policy is governed by the
laws of the United States and the State of Wisconsin. Any
dispute relating to this Policy shall be brought exclusively in the
federal or State courts having jurisdiction in Walworth County,
Wisconsin; and purchaser consents to jurisdiction within the
State of Wisconsin.
Governing Law
FCC Information
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of
the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology.
Visit www.AcuRite.com/patents for details.
Printed in China
01190 INST 081018
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Language                        : en-US
Tagged PDF                      : Yes
Page Count                      : 3
Creator                         : Adobe Illustrator(R) 17.0
For                             : Joseph,
Title                           : INST18_01190M Page 3.pdf
Create Date                     : 8/17/2018 1:50 PM
Bounding Box                    : 0 0 438 654
Container Version               : 11
Creator Version                 : 18
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c123 79.158978, 2016/02/13-01:11:19
Metadata Date                   : 2018:02:27 09:25:37-06:00
Modify Date                     : 2018:08:17 13:50:58+08:00
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Instance ID                     : uuid:ffeabeac-8064-5242-a7a3-bd9626b322ae
Original Document ID            : xmp.did:EF7F117407206811AB08C9A84654EA61
Document ID                     : xmp.id:32b1ba02-9430-40c3-b999-53c4096aac76
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:171d0edb-6b63-4b17-8ce9-0262c2290ff1
Derived From Document ID        : xmp.did:a0dab7f6-ec5d-4b0b-9343-05cbeb67d7a0
Derived From Original Document ID: xmp.did:EF7F117407206811AB08C9A84654EA61
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Macintosh)
History Changed                 : /
History When                    : 2018:02:27 09:25:32-06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Image Height                    : 654
Image Width                     : 438
Image Size                      : 438x654
Megapixels                      : 0.286

EXIF Metadata provided by EXIF.tools