Chaney Instrument W091TX Remote Sensor User Manual W091manual

Chaney Instrument Co. Remote Sensor W091manual

Users Manual

Download: Chaney Instrument W091TX Remote Sensor User Manual W091manual
Mirror Download [FCC.gov]Chaney Instrument W091TX Remote Sensor User Manual W091manual
Document ID565912
Application IDsmZg8iaimb8OaUQotFFgBA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize1.28kB (16031 bits)
Date Submitted2005-07-27 00:00:00
Date Available2005-07-27 00:00:00
Creation Date2005-07-22 18:00:57
Producing SoftwarepdfFactory v1.57 (Windows XP Chinese)
Document Lastmod0000-00-00 00:00:00
Document TitleMicrosoft Word - W091manual.doc
Document CreatorpdfFactory http://www.pdffactory.com
Document Author: cee3

DIGITAL THERMO SENSOR (MODEL NO. W091) OWNER'S MANUAL
Thank you for purchasing the new generation electronic thermo sensor.
Designed and engineered with the state-of-art technology and components,
this instrument will provide accurate and reliable measurement of outdoor
temperature and humidity, and a 433MHz RF communication with your
weather station. Read this manual carefully to full explore the features and
functions of the new product.
Name and Functions of Switch and Buttons:
CH
Select Channel 1,2,3
TX
Force transmission of RF signal
C/F
Select the reading between C and F
BATTERY INSTALLATION
Lift off the back cover by pulling the bottom slot, insert 2 pcs AAA batteries
according to the polarity indicated. Replace the cover after the batteries are
inserted.
SETTING UP THE WIRELESS THERMOMETER:
• For the first installation, always insert batteries to the home unit and then the
remote sensor.
• Set Channel 1 for the first remote sensor. Set channel 2 and channel 3 for
the additional 2nd and 3rd sensors.
• Press the Tx button on the back of remote sensor to verify the RF reception.
C/ F SELECTION
Press “C/F“ to select degree C/ degree F on the LCD display.
LOW BATTERY INDICATION
Low battery indication is available for the remote sensors. Replace the
batteries and follow the setup procedure as mentioned in this instruction
manual.
BATERY DISPOSAL
Replace only with the same or equivalent type recommended by the
manufacturer.
Please disposal of old, defective batteries in an environmentally friendly
manner in accordance with the relevant legislation.
FCC ID: RNEW091TX
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
SPECIFICATIONS
Range of temperature measurement:
Remote sensor : -20 C to +60 C (-4 F to +140 F)
Channel :
Transmission :
Resolution :
Batteries :
up to 30M (100 ft.) open area, RF434 MHz
0.1 degree for temperature, 1% for humidity
AAA x 2 pcs
Modifications not authorized by the manufacturer may void users authority to
operate this device
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica tions.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Title                           : Microsoft Word - W091manual.doc
Author                          : cee3
Creator                         : pdfFactory http://www.pdffactory.com
Producer                        : pdfFactory v1.57 (Windows XP Chinese)
Create Date                     : 2005:07:22 18:00:57
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RNEW091TX

Navigation menu