ChargePoint 241083 ChargePoint Network Communication Board User Manual

ChargePoint, Inc. ChargePoint Network Communication Board

User manual

Download: ChargePoint 241083 ChargePoint Network Communication Board User Manual
Mirror Download [FCC.gov]ChargePoint 241083 ChargePoint Network Communication Board User Manual
Document ID1862508
Application IDGo0U88JY2iHWetQKfZzsrA==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize9.8kB (122451 bits)
Date Submitted2012-12-18 00:00:00
Date Available2012-12-18 00:00:00
Creation Date2012-12-14 12:03:56
Producing SoftwareAdobe PDF Library 10.0
Document Lastmod2012-12-14 12:03:59
Document TitleUser manual
Document CreatorAcrobat PDFMaker 10.1 for Word
Document Author: Thanh

Module Installation Instructions
And
Regulatory Approval Conditions
802.11b/g/n and 802.15.4 Module
Model No: 241083Z and 241083
FCC ID: W38-241083Z and W38-241083
IC: 8854A-241083Z and 8854A-241083
Date: 11-19-2012
Revision: 1
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subjected to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC Warning: Any changes or modifications to this device not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
Industry Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.”
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement."
Regulatory Approval Conditions for using 241083Z/241083 Module:
1. Antennas must have a greater distance than 20 cm separation from the transmitting
antenna to the user body during normal operation condition. This device can be used
with Prestta WLAN Embedded Antenna. The specification of the antenna including
antenna gain is shown below.
2. If a different antenna than the original certificated antenna is being use for the final
product, the host will need to consult with Coulomb Technologies Inc. to verify the
condition of approval applicability.
3. A permissive change from Coulomb Technologies Inc. is required as part of final system
FCC/IC submission.
4. If the host has other transmitters beside from the module, simultaneous transmitting is
not permitted unless a permissive change from the module manufacture is received.
5. For FCC, the label on the final system must include a statement: “Contains FCC ID: W38241083Z” or “Contains FCC ID: W38-241083” depend on the model that being used. For
IC, “Contains IC: 8854A-241083Z” or “Contains IC: 8854A-241083” depend on the model
that is being used.
6. Labeling requirement for FCC, “This device complies with part 15 of the FCC Rules.
Operation is subjected to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation”.
For IC, “This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.” “Le présent appareil est conforme
aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement."
A user’s manual or instruction manual must be included with customer product.
Note: Model: 241083Z is under FCC ID: W38-241083Z and IC: 8854A-241083Z
Model: 241083 is under FCC ID: W38-241083 and IC: 8854A-241083

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Thanh
Create Date                     : 2012:12:14 12:03:56-08:00
Modify Date                     : 2012:12:14 12:03:59-08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2012:12:14 12:03:59-08:00
Creator Tool                    : Acrobat PDFMaker 10.1 for Word
Document ID                     : uuid:d5b25679-2fb2-4b50-9298-07c250509ef5
Instance ID                     : uuid:258d36db-f551-45c3-8be0-9db4382d609e
Subject                         : 3
Format                          : application/pdf
Creator                         : Thanh
Producer                        : Adobe PDF Library 10.0
Source Modified                 : D:20121214200313
Company                         : Microsoft
Page Layout                     : OneColumn
Page Count                      : 4
EXIF Metadata provided by EXIF.tools
FCC ID Filing: W38-241083

Navigation menu