Charm Winner Co RF-204PU24 Gamepad User Manual
Charm Winner Co Ltd Gamepad
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 539026 |
| Application ID | GKaiU43L89LbycXr2k6ANA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 93.84kB (1173038 bits) |
| Date Submitted | 2005-05-04 00:00:00 |
| Date Available | 2005-05-04 00:00:00 |
| Creation Date | 2004-10-28 14:19:41 |
| Producing Software | Adobe PDF library 5.00 |
| Document Lastmod | 2005-05-04 11:37:46 |
| Document Title | User Manual |
| Document Creator | Adobe Illustrator 10.0 |
RF-2.4G Gamepad User’s Manual Oper ation Reference 1. G amepad Calibration Before using this gamepad, please rotate the sticks once to calibrate perfectly. 2. Connect Gamepad with Recei ver Please follow below steps to connect the gamepad with the receiver. 1) Press and hold the Connection/Vibration button of the gamepad until the ModeLED twinkles with orange color. R F-2.4G PC Combo PS2 Gamepad 2) Press the button of the receiver to connect with each other. > L E D indicator: I ntroduction C ondition Online Connection -LED ON Off line C onnecting OFF Twinkle & Orange Thank you for choosing this innovative RF Gamepad. This gamepad not only can be compatible with both PC and PS, but also be equipped with a high 2.4G RF technology. To satisfy users this gamepad is expanded the Macro and Turbo function, users, can perfectly enjoy the convenience and exciting playing with this gamepad. 3. Analog/ Digital S witching This gamepad is equipped with Digital and Analog modes. And there are some different features with PC and PlayStation modes in A/D modes as followings: > PC Package Contents Gamepad Analog Digital D-pad POV HAT X&Y Axis motion Gamepad *1 Left Mini-stick X&Y Axis motion POV HAT Receiver *1 Right Mini-stick Throttle& Rudder Throttle& Rudder USB Cable *1 Button 11, 12 Normal function No function CD Driver *1 User Manual *1 Other Buttons Normal function Normal function Mode-LED Indicator Red System R equirement Green > PlayStation You can switch between digital and analog modes. The Mode-LED turns ON with PC red color in Analog mode and with green color in Digital mode. When the 1. IBM PC 586/PentiumII compatibles or higher gamepad is in Analog mode, the following buttons and sticks may operate in 2. Available USB port or extension USB hub Analog fashion depending on the features supported by the software title. Refer to the software manual for details. 3. CD-ROM drive 4. Microsoft Windows XP/ME/2000/98 recommended PlayStation2 format software D-Pad / Χ,○,□,△ / 2 ministicks / L1, L2, R1, R2 PlayStation 1. PlayStation 2 / PSOne / PlayStation PlayStation f or mat softwar e 2 ministicks 4. V ibration F unction You can switch the vibration function ON or OFF by pressing the Vibration Hardwar e Over view Connection button. Recei ver >L E D indicator: V ibr ation ON Connection LED M ode-LED Low-Battery LED USB Connector Twinkle V ibr ation OFF ON Connection Button 1. 1 Connection Button 2. 2 LED Indicator (One is connection indicator and another is low-battery indicator.) 3. 1 USB Connector for PC 5. Macro function There are four buttons (L2, L3, R2, R3) allowed being set as the macro buttons. Please follow below steps to set up the macro function. 1) Press the Program button to set up the macro function. 2) Press one of four buttons (L2, L3, R2, R3) which you want to set as a macro Gamepad Button6, 8 / R1, R2 Macro/Turbo Button4 /△ Button2 /○ Button3 /□ Button10/Start Vibration/Connection Button1 /Χ Button9/Select Button5, 7 / L1, L2 button. 3) Press the buttons (D-Pad, △,Χ,□,○, L1, R1, L2, R2, L3, R3, Start) in turn to set into the Macro function. 4) Press the Program button again to finish the Macro function setup. Right stick & button12/R3 > L E D indicator Mode-LED Steps of the A/D Mac ro set D-Pad Left stick & button11/L3 Step 1) M ode-LED Orange Connection- OFF. Step 2) Step 3) Twinkle & Orange Step 4) OFF. OFF ON LED PC Eight ways D-Pad PlayStation Button 1, 2, 3, 4 Eight ways D-Pad Χ,○,□,△ Button 5, 6, 7, 8, 11, 12 L1, L2, L3, R1, R2, R3 Button 9, 10 Select, Start Analog Ministick Analog/Digital switching button 6. T urbo function Please follow below steps to set up the Turbo function. 1) Press the Program button. 2) Press the buttons (△,Χ,□,○, L1, R1, Start) which you want to set with the Turbo function. Note: If you want to remove the Turbo function, please repeat the above steps. > L E D indicator Program (Macro/Turbo) button Steps of the Turbo set Vibration/Connection button Mode-LED Red/Green/Orange LED indicator Orange Connection-LED OFF Step 1) Step 2) OFF ON 7. LED Indicator while operating The Mode-LED indicates as the following table when you press any button: Mode Analog Th e condition of Or iginal button Digital M acro/Tur bo Or iginal button M acro/Tur bo Green Orange the button Pressing R ed Orange Release Red then OFF Red then OFF Green then OFF Green then OFF Note: If your gamepad is in Vibration mode, the Mode-LED twinkles when indicating. Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 8. Low -battery LED of the receiver When the Low-battery LED turns ON, please change new batteries. interference by one or more of the following measures: Note: The vibration function will be turned OFF automatically when this Low-battery LED ON. - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into and outlet on a circuit different from that to which the 9. Sleep & Wake Up When you stop operating this gamepad for some time (take a look at the below table), it is receiver is connected. become to a “sleeping” mode to prevent consuming the battery. And you can wake up it - Consult the dealer or an experienced radio / TV technician for help. by press one of the key-buttons as: Vibration/Connection, A/D, Macro/Turbo, Select, Start. Condi tion Online Time for coming sleeping 2 Min Offl ine F unction Setting 15 Sec 1 Min Warning: As shieded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Installation Only for PC A lways install the softwar e firs t, then the hardwar e subsequently. A. Software Ins tallation This RF-2.4G gamepad is the software needed for your device setup, however, if you don’t choose to install it, it is still operated without vibration function. 1. Insert the CD of this gamepad into your CD-ROM; wait for a few seconds for your computer to load the disc. 2. If your system is setup to automatically read a new inserted CD, then the auto run Use only shieded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. I mmer sion Patent program is executed and the opening screen for installation appears. Please follow the on-screen instruction to install this gamepad step-by-step. 3. If your system doesn’t launch the installation software automatically, please find the auto execute file “Install bat”, which is located under the directory of your CD drive and click on it, then follow the on-screen instruction to install this gamepad. The i nstall ed pr ocedures administer as follows: “Protected by one or more patents of Immersion Corporation. A list of applicable patents can be found on Immersion’s website at www.immersion.com.” > Install Shield Wizard information: The system is ready to install, and click “Next ”. > The copyright declares: Select “Agree” and click “Next”. > User’s information: Key in “User’s name and Company”. If your system Safety information is Window 2000/Xp, select an appropriate use limit. > Confirm to start install: Press “Install”. > Finish the install: Press “Finish”. 4. Upon completing software installation, restart your PC as the installation screen requested. B . Hard ware Ins tallation 1. Plug the Mini-USB connect of the cable to the port on the receiver and another USB MODEL: RF-2.4G Gamepad Gamepad Rating:DC 6.5V/100mA 650mW Receiver USB mode Rating: DC 5V/60mA 300mW PS2 mode Rating: DC 3.5V/40mA 140mW DC 8V/30mA 240mW connect to the USB port on your computer. 2. After connected the monitor will show “Find a new hardware” and the standard USB driver will be located for you to finish the easy installation and play games immediately. 3. The system will add an item of this gamepad in the game-controller board automatically, and you can test the function of gamepad. I mpor tance & A ttention 1. When this gamepad is used in PC, please ensure the Joystick ID of it “Joystick 1”, if the USB port of this receiver is properly plugged but no any work. 2. The functions of all buttons may vary in different games. Before start game setting, always read your game manual carefully to approach the best game setting. 3. Please use the same brand of batteries to ensure there is a better efficiency. All brand names mentioned in this manual are trademarks or registered trademarks of their respective companies. For more information or any services are required, please visit us through the Internet link Website: e-mail: http://www.r ockfir e.com.tw service@r ockfir e.com.tw "This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation"
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-701 About : uuid:11f55b60-4ab4-45c2-b04e-0dd56e1e2795 Producer : Adobe PDF library 5.00 Create Date : 2004:10:28 14:19:41+08:00 Modify Date : 2005:05:04 11:37:46+08:00 Creator Tool : Adobe Illustrator 10.0 Metadata Date : 2005:05:04 11:37:46+08:00 Document ID : uuid:d1b1fe6f-2f73-4fce-b4ed-bb8b78fbc498 Instance ID : uuid:e8ad642f-47ae-4da2-9a0b-012b3aba3cf2 Format : application/pdf Has XFA : No Page Count : 2 Creator : Adobe Illustrator(R) 10.0 For : Bill, Charm Title : C:\Documents and Settings\BillTu\ୱ\668u\Untitled-1.ai Bounding Box : 15 19 576 826 Creator Version : 10 Container Version : 9 Image Height : 807 Image Width : 561 Image Size : 561x807 Megapixels : 0.453EXIF Metadata provided by EXIF.tools