Charm Winner Co RF-520U27M Wireless GamePad User Manual RF 2200u E User s Guide 1

Download:
Mirror Download [FCC.gov]
Document ID	275420
Application ID	swcw2aEc9DLPSK1uQmi6yA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.77kB (297076 bits)
Date Submitted	2002-10-08 00:00:00
Date Available	2002-10-08 00:00:00
Creation Date	2002-09-19 23:42:27
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2002-09-19 23:42:27
Document Title	Microsoft Word - RF-2200u E-User's Guide-1.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	BED6A6B3AACC

Cyber Voyager Twin Pro（RF-2200U）
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio / TV technician for help.
Warning : As shieded-type power cord is required in order to meet FCC emission limits and
also to prevent interference to the nearby radio and television reception. It is essential that
only the supplied power cord be used.
Use only shieded cables to connect I/O devices to this equipment.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
User’s Guide
Introduction
Thank you for choosing Rockfire Cyber Voyager Twin Pro (RF-2200u). This stylish Cyber
Voyager Twin Pro is an advanced game control system designed with full ergonomics and
equipped with well-positioned buttons to ensure your game play comfort. Moreover it is built
with innovative 27MHz RF (Radio Frequency) technology for wireless control while playing
games. This user’s guide and the accompanying game devices are intended for use under
Microsoft Windows/ OS.
Package Contents
Your Rockfire Cyber Voyager Twin Pro package comes with the following items:
Rockfire USB Cyber Voyager Twin Pro (gamepad+ joystick)*
Rockfire USB Cyber Voyager Twin Pro Receiver (USB interface)
User’s Guide
x1*
x1*
System Requirement
1)
IBM PC (586/Pentium II compatibles or higher)
2)
Available USB port or extension USB hub
3)
Microsoft Windows® 98/2000/ME/XP
Easy Installation
1. Turn on your PC.
2. Install batteries in your Cyber Voyager Twin Pro gamepad and joystick
3. Plug-in your Cyber Voyager Twin Pro USB connector (receiver) to the USB Port of
your PC and make sure it is firmly connected. Then the LED indicator of the receiver
is always "ON" when it have been connected.
USB non-connecting
USB connecting
4. After your Cyber Voyager Twin Pro is connected, the monitor will shows “Find a
new hardware”, and the OS Standard USB driver will be located for you to finish the
installation step by step immediately.
5. The game device provides two separate channels (CH.1 and CH.2). To avoid the interference
when playing games. Please set the ID for the gamepad & joystick and make sure they are
using different channels.
6. In the end, you may start to calibrate (refer to CH 5-1) this device, and then
customize your gamepad through the game controller to access directly into the game
software for game play.
7. To avoid the interference when playing games. Please set the ID (channel selection)
for each device (refer to CH 5-2).
Operation Reference ＆ Characteristic
5-1 Calibrating
To calibrate the gamepad and joystick will make sure game play more smoothly and correctly. So you
have to enter the Game Controllers page (Start \ Setting \ Control Panel \ Game Controllers or
Joysticks) and select "General/ content" page to calibrate and test the devices. If the cursor is
not in the center of the area, you have to follow the calibrating process step by step. After
finishing calibrating, then you can play game software.
5-2 ID setting (Channel Selection)
Generally speaking, you can play games without ID setting. But if you use other wireless
devides (or you play with two Cyber Voyager Twin Pros ) in your PC. To avoid the interference
when playing games, please set the ID first.
ID setting :
Press the button under the receiver and don't let it go until press any buttons of the gamepad and
joystick. And let the gamepad and joystick using different channels. Then check the LED
indicator of the receiver is becoming green. If yes, then you had finished the ID setting.
ID non-setting
ID setting
ID cancel :
Press the button under the receiver, then the LED indicator of the receive will turn off (green to
off). That means the ID setting be canceled.
5-3 The characteristic of Gamepad
1. Directional Pad (D-Pad)
This Rockfire USB Cyber Voyager Twin Pro gamepad is equipped with the ultra sensitive
directional pad, which offers precise centering and 360-degree movement for your instant
maneuver in gaming.
3. Quick-Response Action Triggers
There are 2 action triggers positioned at the front of this gamepad, these triggers provide you
perfect efficiency in game control. You may program these triggers through the game software.
4. Functioning Buttons
There are 10 independent functioning buttons equipped on the up side of gamepad control panel.
Such button numbers are sufficient enough for you to control the pop games. You may customize
these buttons as different movements, acts or weapons control through the game software to
approach the best gaming performance.
5. Gamepad LED indicator
After you installing the batteries (2 AAA), the LED indicator on the gamepad will be on when you
pull any buttons or D-pad.
6. Channel Selector
There are two channels selected for gamepad or joystick. If the gamepad is set at channel 1, the
joystick should be set at channel 2. Contrarily, if the gamepad is set at channel 2, the
joystick should be set at channel 1.
5-4 The characteristic of Joystick
1. 3D Ergonomic Handgrip with Rudder Function
This joystick is equipped with the 3D ergonomic handgrip, which offers 360-degree auto centering
movement and the precise hand-twist rudder control for your instant maneuver in gaming.
2. Hat Switch (View Finder)
The realistic 8-way coolie hat switch can be set as a view finder and allow you to view your
surroundings from your aircraft’s cockpit in the flight simulation games. Or you may set it as the
weapon control system for efficient control to category weapons in flight missions.
3. Rotary Throttle
This centralized throttle has standard momentum function, which is required by flight simulation
games. You may accelerate or slow down the aircraft speed by rotating this switch for efficient
maneuver control.
4. Functioning Buttons
There are 8 independent functioning buttons equipped on this powerful game control system. The
functions of A (The fire trigger), B, C, D, E & F (Function buttons in the handgrip) and G & H
(Function buttons at the base) are all game dependent. Refer to the game manual for the best use
for these buttons, and such numbers of button is sufficient enough for you to control pop games.
5. Channel Selector
There are two channels selected for gamepad or joystick. If the gamepad is set at channel 1, the
joystick should be set at channel 2. Contrarily, if the gamepad is set at channel 2, the
joystick should be set at channel 1.
5-5 The characteristic of Receiver
1.There are three LED indicators on the receiver. One is the power LED and always "ON" when it
have been connected. The other two LED indicators are represent the gamepad and joystick.
2.The LED indicator of the gamepad and joystick will only flash when any buttons or D-pad is
pushed or pressed.
3. Please refer to the LED Indicators of Receiver as below:
LED Mode (color)
Power LED
RED
Devices LED
USB connector plug-in, the LED is always
RED
With signal
ID Non-setting
DARK
Without signal
ORANGE
With signal
ID Setting
GREEN
Without signal
Importance & Attention
1. Operating distance—The ‘’Cyber Voyager Twin Pro’’ guarantee 1.5 meter operating
distance(even to 2 meter), but when the battery low the wireless operating distance will
shorten.
2. There will be shown two controllers every time when Cyber Voyager Twin Pro is properly
plugged into your PC. Ensure the ID in control panel is “Controller 1 (2 axis, 12 buttons
controller) ” & "Controller 2 (4 axis, 8 buttons controller) " , if it is properly plugged but does not
work or only shown one controller. *
Note for user: If it seems does not work, please enter the Game Controllers page (Start \ Setting \
Control Panel \ Game Controllers or Joysticks) and select "General" page to check the status. If
there is only one controller or no controller on this page, please remove it from the Game
Controller page. Subsequently re-plug the Cyber Voyager Twin Pro and complete the calibration
procedure, then it will work as usual.
3. Not every game requires all functioning buttons on your Rockfire Cyber Voyager Twin
Pro. If you find some buttons do not work inside the game, please check the software
game setting manual. The function of the gamepad buttons may vary in different games.
Before proceed with game playing, please check from the ‘’OPTION’’ manual inside the
game, and always read your game manual carefully to approach the best game setting.
4. Your Rockfire Cyber Voyager Twin Pro needs little care and services. You may clean it with a
damp cloth periodically. Do not use abrasive cleaners of any type and do not spray liquid cleaners
directly on your gamepad. Any fluid leaks inside the gamepad may cause unexpected damages.
-------------------------------------------------------------------------------------------------------------------------Visit Rockfire’s Web Site at http://www.rockfire.com.tw occasionally. The site contains the latest on
Rockfire’s product line and useful technical support information, or drop us some line at e-mail:
service@rockfire.com.tw
All brand names, trademarks, and logos mentioned above are the properties of their
respective owners.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:09:19 23:42:27+08:00
Modify Date                     : 2002:09:19 23:42:27+08:00
Page Count                      : 6
Creation Date                   : 2002:09:19 15:42:27Z
Mod Date                        : 2002:09:19 15:42:27Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : 
Metadata Date                   : 2002:09:19 15:42:27Z
Creator                         : 
Title                           : Microsoft Word - RF-2200u E-User's Guide-1.doc

EXIF Metadata provided by EXIF.tools