Cheerson Hobby Technology GCCXSTAR UFO User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2859382
Application ID	mtPvXgc6N3e5TwEyDwLr6g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	171.61kB (2145160 bits)
Date Submitted	2015-12-29 00:00:00
Date Available	2015-12-29 00:00:00
Creation Date	2015-12-17 14:26:00
Producing Software	Acrobat 5.0 Image Conversion Plug-in for Windows
Document Lastmod	2015-12-17 14:26:46
Document Title	User Manual
Document Creator	Acrobat 5.0 Image Conversion Plug-in for Windows

Power Indicator
Take MODE 2 as example Low Voltage Protection And Dormancy Function
Low Voltage:
When the battery voltage is low, the four indicators on the quad
copter will flash. At this time, please lower the flying height,
close the quad copter power and recharge it.
Right Side Flips
Press the control stick, and push the aileron to the right side
when hearing the sound of “DI”. . ,» . backward
backward trimming
trimming
2.Switch on the power of the quad copter and put the quad copter on the level ground
and keep static. The indicator of the quad copter will be flashing.
3.Switch on the power of the transmitter and the transmitter will send out sounds of
“DI DI", and then push the throttle stick to the highest (as Figure 2 shown). It will
send out sound of “Di” and then pull the throttle stick to the bottom
(as Figure 3 shown). At the same time, the indicator of the quad copter will
stop flashing.
Battery Installation and Charging Way
: onset i
I Battery Installation no” Tumwm plug m u m.
Safety Guide of Lithium Battery
Under the condition of non-operation, charging to the lithium battery
Aileron Control left flying and right flying left transverse right transverse
horizontally of the quad copter up
Illustration of Each Part
Ascend & descend
(forward! backward)!
direction! 3D flip
control stick
Throttle! left &
right sideward
flying! high-speed
& low-speed
Screwdriver
sales agent or retailer who making or selling this product won’t take any
USEFI
MANUAL
NO.CX—STARS
Please read the manual carefully before operation.
may cause fire or injury or loss of property. The user should well notice
the risk hidden when using this kind of product. The manufacturer or
responsibility for any accident happened. Please read carefully the safe
WARN'NGi guidance and charging instruction before using this product.
Please put the battery on the place where is far away from the children
or pets. User on or less than 18 years old should use this product under
the guidance of adults. Children under ayears Old Should not Operate It
by its own.
Guarantee of Lithium Battery:
The guarantee of this product is only for the raw materials and the workshop and no
guarantee to this product. Under any circumstances, our company won’t
compensate the amount that higher than the retail price valued.
1.It is highly forbidden to charge it for a long time under unattended condition so as
to avoid the accident.
2.Please use the original charger included for charging this product.
3.It is highly forbidden to decompose or disassemble the battery.
4.Batteries are forbidden to be used or kept under high temperature or heat source or
near the flammable product.
5When charging the battery, covering the charger or battery is highly forbidden.
Please keep ventilation and make sure that it should be charged under the condition
of fire safety.
6.If the battery sends out smelly odor or gets heated or deformed or there is any
abnormal phenomenon happened during the process of charging, please remove the
batteries from the charging device or charger and move to the safety outdoor place
(if there are batteries which appear abnormal phenomenon, please DO NOT litter
around. Please dispose it by taking safe measure) so as not to cause combustion
or explosion.
7.Batteries are forbidden to be stored or transported together with the metallic object.
8.Batteries are forbidden to be thrown into the fire or get heated.
9.Metal is forbidden to connect directly with the “+””-” polarity of the battery.
10.lt is highly forbidden to upside down the “+””-" polarity of the battery.
11.If there is any battery leakage happened or electrolyte liquid mistakenly goes into
the eyes, please do not rub the eyes but rinse the eyes with clear water.
12.When the battery is not used, please store it in the cool or dry environment.
Transmitter
Main Rotor
%\
USB charging line
Each Functions Introduction of Transmitter
Throttle! direction
[high-speed &
low-speed!
control stick
(unable)
(unable)
Power Indicator
left throttle ( MODE2 )
“Ill-l
was
Ascend &
descend (fonrvard!
backward) aileron
(left &right
sideward flying!
3D flip) control
stick
Aileron left &
right sideward
flying trimming
(fonrvard/ backward)
trimming
control stick
Aileron left &
(unable) , ' right sideward
flying trimming
ascend 8. descend
(forward! backward
trimming (unable)
right throttle ( MODE1 )
Environment for Flying
Please fly in the spacious indoor, and make sure there is no obstacles, animals or humans nearby.
-Please make sure that the appropriate environment should be suitable before
Flying. When flying, DO NOT allow the quad copter beyond your sight.
NOTE: -The children should be under the guidance of adults when flying.
Notes for Control
Scope of control: The flying scope of the quad copter is about 25m and if beyond the
scope, it would be out of control.
Warning: If flying in strong wind, the quad copter may go beyond the control scope and
it would be out of control.
Flight time: The quad copter can fly in the RIC distance under the condition of fully charge
and mini wind. Please recharge it if the flight is powerless.
Plouoretertothemenualtoensmthecorrectll' me. .600.
*PtouoOONO‘l’rolouo aoouornymmomh
thethrottto
“WWW-
itwouid downabrupttyond
2.lnstall 2PCS 1.5V
“AAA” alkaline battery
(without battery).
1.0pen the battery
protective cover of
remote control.
3.Lock the protective
cover of the battery.
Quad copter Charging
Connect the quad copter with the charging line and then insert the USB charging line
into the USB port of the computer or any other USB chargers. When the USB indicator
is ON, that represents it is under charging. When the indicator is OFF, that represents
it is fully charged. Besides Apple charger, this USB charging line can be connected
with any other chargers of Smart mobile or movable power or being charged on the
USB interface on the car. The voltage of the USB interface is +5+0.5V.
Begin To Take Off
The correct starting sequences of opening
program are as the followings:
1.Pull the throttle stick to the lowest point.
(Figurel) (Figure3)
Operation and Control
Attention: Please avoid losing control. You should bear in mind that you need to
operate the control stick slowly when operating the quad copter. During the process
of controlling, the quad copter may lose some power. Therefore, during the courses
of flying practice, you need to add some extra power to keep the quad copter flying
in a certain height.
Throttle Control ascending and t Ascend
descending of the quad copter
left throttle right throttle
Direction rudder Control left rotation and
right rotation of the quad copte
left throttle right throttle
Rudder Control forward and backward
of the quad copter
left throttle right throttle
left throttle right throttle
Attention: When the quad copter flies towards to you,
the control direction will be reversing.
MODE SETTING 8! MODE INSTRUCTIONS
This kind of quad copter has the heading locking mode
Gently press the throttle stick to enter into the setting mode:
The beeper on the transmitter sounds “DI" —> The quad copter
enters the junior mode.
The beeper on the transmitter sounds “DI DI" —> The quad copter
enters the intermediate mode.
The beeper on the transmitter sounds "DI DI DI" —> The quad copter
enters the heading locking mode (headless mode)
MODE INSTRUCTION:
Heading locking mode: The heading of the quad copter refers to the
positive direction pointed by the nose when turn on the quad copter.
When entering this mode, no matter where the nose is, the quad copter
will flying forward to the positive direction pointed by the nose with power
as pushing forward the direction stick, and the other three directions are
the same as this.
--------------------------------------------------------------- DIRECTION OF NOSE
left throttle right throttle
Aerial Tumbling Skills
3 modes can all be used to perform flip action in the air, press the control stick and it
will send out sound of “DI” and then enter the Flip Mode.
left throttle right throttle
AThis model of mini quad copter can fly with 360 degree flip action in the
air through operating the control stick. In order to better carry out this flip
function and make sure the quad copter is one meter height above the ground,
you'd better operate the flip action during the process of ascending,thus the
mini quad copter will be easier to keep the height after making fli paction.
Left Side Flips
Press the control stick, and push the aileron to the left side when hearing the
sound of “DI”.
left throttle right throttle
left throttle
Front Flips
Press the control stick, and push the ascend/descend stick to forward
right throttle
when hearing the sound of “DI”.
left throttle
Back Flips
Press the control stick, and push the ascend/descend stick to backward
right throttle
when hearing the sound of “DI”.
left throttle
right throttle
forward ‘ -, trimming
trimming ‘ ‘ '
Left sideward w I trimming
fly trimming
right side
trimming
fly trimming
Accelerator Alignment
When the quad copter appears unstable flying performance or fly to one
direction in a quick drifting speed, you need to calibrate the accelerometer.
1.After finishing the decoding between the quad copter and the transmitter,
the quad copter shall be placed on the level ground.
2.Push the throttle/direction control stick to the left bottom corner and the
ascend/descendlaileron control stick to the left up corner. At this time, the
indicator of the quad copter will be flashing for 1~2 seconds, then the
decoding is successful. (Left-hand throttle)
3.Push the ascend/descend control stick to the left up corner and the throttle!
aileron control stick to the left bottom corner. At this time, the indicator of the
quad copter will be flashing for 1~2 seconds, then the decoding is successful.
(Right-hand throttle)
left throttle right throttle
Note: If it is still driven to one direction, you can put it on the horizontal
ground and place several papers on that direction (the quantity of the papers
needed is depending on the driven level so that it can adjust the accelerometer
horizontal angle of deviation).
Dormancy Function:
When the quad copter is charging for a long time and without any
operations (about 8 minutes), the system will automatically cutoff
the power. if you need to reopen the quad copter, you only need
to turn off the power switch of the quad copter and reopen it.
Common Breakdown Maintenance Of The RIC Quad Copter
Troubleshooting Maintenance method
Return-on and decoding, and if the problem still can’t
be solved, check whether the propellers of the quad
copter are deformed or not. If there are deformed
badly, they should be replaced.
Main rotor don’t
work or drifting
take-off
Recharge the quad copter if there is short batterr‘. lf
Can’t take off the ro lem still can’t be solved, you can make t e
cali ration according to the “Accelerometer
Calibration” of the manual.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user‘s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
0 Reorient or relocate the receiving antenna.
0 Increase the separation between the equipment and receiver.
0 Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
0 Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Modify Date                     : 2015:12:17 14:26:46+08:00
Create Date                     : 2015:12:17 14:26:00+08:00
Creator                         : Acrobat 5.0 Image Conversion Plug-in for Windows
Page Count                      : 1
Mod Date                        : 2015:12:17 14:26:46+08:00
Creation Date                   : 2015:12:17 14:26:00+08:00
Producer                        : Acrobat 5.0 Image Conversion Plug-in for Windows
Metadata Date                   : 2015:12:17 14:26:46+08:00

EXIF Metadata provided by EXIF.tools