Cheng Uei Precision Industry Co FHA0510 2.4GHz Wireless Mobile Mouse Dongle User Manual Nano Dongle QSG

Cheng Uei Precision Industry Co Ltd 2.4GHz Wireless Mobile Mouse Dongle Nano Dongle QSG

Manual

Model: FHA-0510 型號型號型號型號：：：：FHA-0510 Product Name: 2.4GHz Wireless Mobile Mouse Dongle 品名品名品名品名：：：：2.4GHz 無線光學移動滑鼠無線光學移動滑鼠無線光學移動滑鼠無線光學移動滑鼠 dongle 開啟電腦電源開關開啟電腦電源開關開啟電腦電源開關開啟電腦電源開關 推向推向推向推向 OpenOpenOpenOpen 即可打開上蓋即可打開上蓋即可打開上蓋即可打開上蓋 將接收器插置電腦將接收器插置電腦將接收器插置電腦將接收器插置電腦上上上上 安裝驅動程式安裝驅動程式安裝驅動程式安裝驅動程式 取出接收器取出接收器取出接收器取出接收器，，，，裝入一枚裝入一枚裝入一枚裝入一枚 AAAAAAAA電池電池電池電池 安裝完成安裝完成安裝完成安裝完成 推至推至推至推至 OnOnOnOn
Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Operating Temperature: -40 to 85 degree Power Consumption: 5 Vdc from host equipment Canada-Industry Canada (IC) Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instruction as documented in this manual. 低功率電波輻射性電機管理辦法低功率電波輻射性電機管理辦法低功率電波輻射性電機管理辦法低功率電波輻射性電機管理辦法 第 十 二 條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第 十 四 條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

Navigation menu