Cheng Uei Precision Industry H680 Bluetooth Handsfree Headset User Manual 9510a87o Front

Download:
Mirror Download [FCC.gov]
Document ID	783513
Application ID	7O31QVWaWbYVOcAmU1ji/w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	334.06kB (4175790 bits)
Date Submitted	2007-04-20 00:00:00
Date Available	2007-04-20 00:00:00
Creation Date	2007-04-12 08:46:51
Producing Software	Adobe PDF library 7.77
Document Lastmod	2007-04-18 11:24:17
Document Title	9510a87o_Front
Document Creator	Adobe Illustrator CS2

motorola
Bluetooth
Handsfree Headset
BEFORE YOU BEGIN
®
CHARGE
START BLUETOOTH
FEATURE
Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.
Take a moment before you get started to familiarize yourself with your new H680
Bluetooth Handsfree Headset. Along with your headset, a charger base is provided for
both charging and storage.
Speaker
Charger
Cover
Charging
Contacts
(on reverse
side)
Volume
Buttons
Charging
Contacts
Your Headset's Battery
1 Plug the Motorola charger into the port on the
charger base.
2 Place headset into charger base ensuring that
charging contacts on the headset and
charging base connect.
Charging
Contacts
For most Motorola phones (at the main menu):
1 Press M (Menu ) > Settings > Connection >
Bluetooth Link > Setup.
3 Select Change.
Charger
Port
Power
Switch
Get connected in 4 quick steps.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 6809510A87-O
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2007.
Call
Button
Indicator
Light
Microphone
The indicator light turns red when the battery
is charging. It may take up to 1 minute for the
indicator light to turn on. When the headset's
battery is fully charged (about 2 hours), the
indicator light turns off.
3 Disconnect the charger.
Note: Headset is not functional while charging.
PAIR CONTINUED
Your Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
1 On your Motorola phone, press M (Menu ) >
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
TEST AND USE
Your phone and headset are now paired and
ready to make and receive calls.
To make a call:
1 Place the headset over your ear. See
"Wearing the Headset" on the reverse side
of this guide.
The phone lists Bluetooth devices it finds.
2 On the phone, dial the number you want to
2 Select Motorola H680.
3 Select OK or Yes to pair your headset with
If your phone and headset are successfully
paired, you will hear ringing on the headset.
your phone.
4 Enter the passkey: 0000
5 Select OK.
When your headset successfully pairs and
connects with your phone, the indicator light
changes from steadily lit to flashing blue.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
call and press SEND key on your phone.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
STORING YOUR
HEADSET
The charger base provided is used to charge
and store your headset. When not using your
headset, you should place it in the charger
base.
As shown, the charger cover can be placed on
top of the charger base, or underneath it to
provide support for desktop placement.
PAIR
Your Headset
Your Phone
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
2 Scroll to Power.
H680
Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Remove headset from charging base and
power on by sliding Power switch to the On
position (towards Power symbol on headset).
The indicator light flashes to initiate easy
pairing. After a few moments, the indicator
light will be steadily lit in blue to indicate
headset is in pairing mode.
4 Scroll to On.
5 Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
USING YOUR H680
See
Features and
Functions Guide
on the reverse side
for information on
using your H680
Indicator Light
(steadily blue
for pairing mode)
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
TROUBLESHOOTING
My headset will not enter pairing mode.
Make sure that any devices previously paired with
the headset are turned off. If the indicator light is
not steadily lit in blue, turn off both the other
device and headset, wait 10 seconds, then turn
headset back on. Wait for the indicator light to
become steadily lit in blue, indicating the headset
is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2). If
the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and pair
your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/Bluetoothsupport
Features and
Functions Guide
TURNING HEADSET ON
AND OFF
EARBUDS AND YOUR
HEADSET
WEARING THE
HEADSET
CHANGING FOR USE
ON OTHER EAR
H680
Bluetooth®
Handsfree Headset
IMPORTANT:
Be sure to first follow the
To turn your headset on, slide the Power
switch on (towards Power symbol on
headset). The indicator light is steadily
purple for several seconds, then flashes
blue (if paired and connected with another
device) or is steadily blue (if ready to be
paired).
Hereby, Motorola declares that this
product is in compliance with:
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
• All other relevant EU Directives.
Product
Approval
Number
You can wear your H680 headset on your left or
right ear. The headset comes ready for the right
ear. To change the headset for the left ear:
1 Gently lift and pull the top of the earhook up
and off speaker stem.
2 Flip the headset over.
3 Attach the earhook to the speaker stem.
Indicator
Light
Your headset’s performance is greatly
dependent upon achieving a good fit on your
ear. Therefore, we recommend trying all the
supplied earbuds with your headset.
Power
Switch
MAKING CALLS
MAKING CALLS CONTINUED
Function
Action
Function
Action
Receive a call
Tap the Call button
Tap both Volume
buttons
Answer a second
incoming call
Tap the Call button
Mute or unmute a call
Tap the Call button
Reject a call
Press and hold a
Volume button until
you hear two
descending tones
End an active call and
resume a call on hold
Disable the
indicator light
First slide the switch
toward charging plug
(to turn headset off),
then press and hold
both Volume
buttons AND slide
the switch towards
the microphone (to
turn headset on)
End a call
Tap the Call button
Redial last call
Press and hold the
Call button until you
hear two ascending
tones
Make a voice dial call
Tap the Call button
and speak the
name after the tone
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.
To wear your headset, flex the earhook and
loop it over your ear as shown.
To turn your headset off, slide the Power
switch off. The indicator light will turn off.
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H680.
European Union Directives
Conformance Statement
Your H680 headset is supplied with multiple
earbuds. The earbud is fitted onto the end of
your headset’s earpiece speaker, and placed
onto your ear when using your headset.
Note: Your H680 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
Note: Some features are phone/network dependent.
Be sure to position the ear bud into your ear
canal for optimal audio performance and
comfort.
INDICATOR LIGHTS
With the Charger Plugged In
Headset Indicator
Headset Status
Steady red
Charging
Off
Charging complete
With No Charger Plugged In
Headset Indicator
Headset Status
Off
Power off
Steady purple
Powering up
Steady blue
Pairing/connection
mode
10 rapid purple flashes
Connection successful
Slow blue flash
Standby (not on call)
Quick blue flash
Incoming call
Slow blue pulse
Connected (on a call)
Slow purple pulse
Connected
(on a muted call)
Red flash
Idle (not connected)
Quick red flash
Low battery
Note: After 30 minutes of inactivity, the light stops flashing to
conserve power, but the headset remains in standby mode.
AUDIO TONES
Audio Tone
Ring tone
Single high tone
High to low tone
Single high tone when
pressing volume button
Two ascending tones
Two descending tones
Low to high tone
No audio indications;
deteriorating quality
Two tones
repeated every 30 sec.
Headset Status
Incoming call
Phone network not
available
End call
Volume at minimum
or maximum
Mute enabled
Mute disabled
Connection
confirmation/voice
activation
Out of range
Low battery
IC Statement

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Count                      : 4
Creator                         : Adobe Illustrator(R) 12.0
For                             : Rick Lazier, Harbor Light Communications
Create Date                     : 4/12/2007 8:46 AM
Bounding Box                    : -55 -354 1313 351
Container Version               : 9
Creator Version                 : 12
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:a95b0386-228d-4b1c-848e-9caadd20d2f7
Producer                        : Adobe PDF library 7.77
Creator Tool                    : Adobe Illustrator CS2
Modify Date                     : 2007:04:18 11:24:17+08:00
Metadata Date                   : 2007:04:18 11:24:17+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 132
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 17131 bytes, use -b option to extract)
Document ID                     : uuid:D7C4DF3FFCE8DB11A169D38B8E6EC4B7
Instance ID                     : uuid:51b4894c-ffd7-4df2-a346-2333204f5145
Derived From Instance ID        : uuid:079C54AC7DE8DB11AD6EB9C91F161D53
Derived From Document ID        : uuid:8A5E31809FFFDA11A7BED503AC3CFE7D
Format                          : application/pdf
Title                           : 9510a87o_Front

EXIF Metadata provided by EXIF.tools