Cheng Uei Precision Industry H685 Bluetooth Handsfree Headset User Manual 9510a87o Front

Cheng Uei Precision Industry Co., Ltd. Bluetooth Handsfree Headset 9510a87o Front

User manual

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. © Motorola, Inc. 2007.Motorola, Inc.Consumer Advocacy Office1307 East Algonquin RoadSchaumburg, IL 60196www.hellomoto.com1-877-MOTOBLU1-888-390-6456 (TTY/TDD United States for hearing impaired)Guide Number: 6809510A87-OmotorolaBluetooth®Handsfree HeadsetGet connected in 4 quick steps.H680VolumeButtonsMicrophoneSpeakerPowerSwitch CallButtonIndicatorLightIndicator Light(steadily bluefor pairing mode)ChargingContacts(on reverseside)My headset will not enter pairing mode.Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode.My phone doesn't find my headset.Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3).My headset worked before but now it's not working.Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3).Support.If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/BluetoothsupportTROUBLESHOOTINGBefore using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.Take a moment before you get started to familiarize yourself with your new H680 Bluetooth Handsfree Headset. Along with your headset, a charger base is provided for both charging and storage. ChargerPortBEFORE YOU BEGIN12START BLUETOOTH FEATUREYour PhonePress (Menu) > Settings > Connection > Bluetooth Link > Setup.Scroll to Power.Select Change.Scroll to On.Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off.Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.12345Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone.For most Motorola phones (at the main menu):M3PAIRYour HeadsetBefore you can use your headset, you must pair (link) it with your phone.Step A - ENSURE HEADSET IS IN PAIRING MODERemove headset from charging base and power on by sliding Power switch to the On position (towards Power symbol on headset). The indicator light flashes to initiate easy pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode. If the headset does not enter pairing mode, see TROUBLESHOOTING for help.PAIR CONTINUEDYour PhoneStep B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET34512For most Motorola phones:On your Motorola phone, press (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists Bluetooth devices it finds.Select Motorola H680.Select OK or Yes to pair your headset with your phone.Enter the passkey: 0000Select OK.When your headset successfully pairs and connects with your phone, the indicator light changes from steadily lit to flashing blue.Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.M4TEST AND USEYour phone and headset are now paired and ready to make and receive calls. To make a call: Place the headset over your ear. See "Wearing the Headset" on the reverse side of this guide.On the phone, dial the number you want to call and press SEND key on your phone.If your phone and headset are successfully paired, you will hear ringing on the headset.After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON.12USING YOUR H680SeeFeatures and Functions Guideon the reverse side for information onusing your H68012Note: Headset is not functional while charging.3Plug the Motorola charger into the port on the charger base.Place headset into charger base ensuring that charging contacts on the headset and charging base connect. The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged (about 2 hours), the indicator light turns off.Disconnect the charger.CHARGE Your Headset's Battery3STORING YOUR HEADSETThe charger base provided is used to charge and store your headset. When not using your headset, you should place it in the charger base.As shown, the charger cover can be placed on top of the charger base, or underneath it to provide support for desktop placement. ChargerCoverChargingContacts ChargingContactsDRAFTDRAFT
PowerSwitchIndicatorLightIMPORTANT: Be sure to first follow theQuick Start Guideon the reverse side of this guideto complete initial setup of your H680.Features and Functions GuideH680Bluetooth®Handsfree HeadsetTURNING HEADSET ON AND OFFEARBUDS AND YOUR HEADSETYour H680 headset is supplied with multiple earbuds. The earbud is fitted onto the end of your headset’s earpiece speaker, and placed onto your ear when using your headset.Your headset’s performance is greatly dependent upon achieving a good fit on your ear. Therefore, we recommend trying all the supplied earbuds with your headset.• The essential requirements and other relevant provisions of Directive 1999/5/EC.• All other relevant EU Directives.European Union Directives Conformance Statement ProductApprovalNumberThe above gives an example of a typical Product Approval Number.You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your product’s label in the “Search” bar on the web site.Hereby, Motorola declares that this product is in compliance with:To turn your headset on, slide the Power switch on (towards Power symbol on headset). The indicator light is steadily purple for several seconds, then flashes blue (if paired and connected with another device) or is steadily blue (if ready to be paired). To turn your headset off, slide the Power switch off. The indicator light will turn off.WEARING THE HEADSETTo wear your headset, flex the earhook and loop it over your ear as shown.Be sure to position the ear bud into your ear canal for optimal audio performance and comfort.CHANGING FOR USEON OTHER EARGently lift and pull the top of the earhook upand off speaker stem.Flip the headset over.Attach the earhook to the speaker stem.1233You can wear your H680 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear:MAKING CALLS MAKING CALLS CONTINUEDNote: Your H680 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.Function ActionReceive a call Tap the Call buttonMute or unmute a call Tap both Volume buttonsReject a call Press and hold a Volume button until you hear two descending tonesEnd a call Tap the Call buttonRedial last call Press and hold the Call button until you hear two ascending tonesMake a voice dial call Tap the Call button and speak the name after the tone Function ActionAnswer a second Tap the Call button incoming callEnd an active call and Tap the Call buttonresume a call on holdDisable the First slide the switchindicator light toward charging plug (to turn headset off), then press and hold both Volume buttons AND slide the switch towards the microphone (to turn headset on)Note: Some features are phone/network dependent.INDICATOR LIGHTSWith the Charger Plugged InHeadset Indicator Headset StatusSteady red ChargingOff Charging completeWith No Charger Plugged InHeadset Indicator Headset StatusOff Power offSteady purple Powering upSteady blue Pairing/connection mode10 rapid purple flashes Connection successfulSlow blue flash Standby (not on call)Quick blue flash Incoming callSlow blue pulse Connected (on a call)Slow purple pulse Connected (on a muted call)Red flash Idle (not connected)Quick red flash Low batteryNote: After 30 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode. AUDIO TONESAudio Tone Headset StatusRing tone Incoming callSingle high tone Phone network not availableHigh to low tone End callSingle high tone when Volume at minimumpressing volume button or maximumTwo ascending tones Mute enabledTwo descending tones Mute disabledLow to high tone Connection confirmation/voice activationNo audio indications; Out of rangedeteriorating qualityTwo tones Low batteryrepeated every 30 sec.DRAFTDRAFT
IC Statement

Navigation menu