Cheng Uei Precision Industry KL05YC1 GSM Mobile Phone User Manual UserManual
Cheng Uei Precision Industry Co., Ltd. GSM Mobile Phone UserManual
UserManual.wiki
>
Cheng Uei Precision Industry
>
KL05YC1 User Manual
(KL05) UserManual_20110722
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![8 [Warning]: 1. If the battery is totally empty, charging icon or LED is not on. Therefore, you should charge the battery maximum up to 10-20 minutes. 2. If you turn off handset abnormally, please take out battery about 10 seconds then insert battery. Otherwise the battery will discharge and run out of power quickly. Charge Battery • Connect the USB cable the power jack on the right side of your phone. • Connect the charger to an AC wall socket. The charging icon is displayed briefly if the phone is switched on. If the battery is completely empty, it may take a few minutes before the charging indicator appears on the display or any calls can be made. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS STANDBY TIME IS UP TO 500 HOURS (ACTUAL STANDBY TIME RELATE TO THE NETWORK STATE OF USER)](https://usermanual.wiki/Cheng-Uei-Precision-Industry/KL05YC1/User-Guide-1507894-Page-8.png)
![15 Menu Functions & Their Descriptions Call record (Menu 1) The numbers of the last 300 (Each page of SIM1’s or SIM2’s Missed calls / Dialed calls/ Received calls can save 50 calls) calls that you have made are saved in the call record list. Call records, Dialed calls, Received calls and Missed calls are list under separate tabs. User can press or enter call list from idle mode. Use navigation key to scroll between the tabs. Call record ♦ From idle mode, press or . Scroll to the Call record item. Within the submenu, you can view all the Missed, Dialed, and Received calls. Dialed calls ♦ From idle mode, press or . Scroll to the Dialed calls press OK. Within the submenu you can view the numbers from which you have most recently called or attempted calls. Received calls ♦ From idle mode, press or . Scroll to the Received calls press OK. Within the submenu you can view the numbers from which you have most recently accepted calls Missed calls ♦ From idle mode, press or . Scroll to the Missed calls press OK. Within the submenu, you can view the phone numbers from which somebody has most recently tried to call you ♦ In the list of missed calls press OK display Call information. ♦ In the missed calls list, press Options, you can: Delete / Save / Dial / Edit / Send SMS / Send MMS / Add to blacklist / Delete all / Move to private. Users also can press ; select Call record press OK to see all the Missed calls, Dialed calls and Received calls information in this submenu. ＊ If the call record is moved to the private, you can not see the detail information in the Call record---Missed calls / Dialed calls / Received calls folder, it will be find in the Organizer---Private Menu---Call record--- Dialed calls / Received calls / Missed calls folder. [Note: The default password is 0000] Delete call lists ♦ In this submenu, Press "OK" will display SIM 1 or SIM 2 item for you to choose from: Missed calls/ Dialed calls/ Received calls/ Delete All ♦ Press OK to delete it Call duration This function records the length of time or duration of all incoming and outgoing calls in hours, minutes, and seconds. Press "OK" will display SIM 1 or SIM 2 item for you to](https://usermanual.wiki/Cheng-Uei-Precision-Industry/KL05YC1/User-Guide-1507894-Page-14.png)
![19 File manager (Menu 4) In the File manager menu, you can manage images, photos, recordings, tones that you have. Press Menu, select File manager, and press option to Open or Format submenu of File manager. Pressing option you can choose Open, Create folder, Rename, Delete and Sort item. Please make sure the micro SD card has been ready before you use File manager function. Phonebook (Menu 5) Search You can search contacts by name characters or number. ♦ To input or edit a searched item, press Options to enter into the submenu. You can View, Edit, Delete, Copy, Move, Send SMS, Send MMS, Send contact, Add to blacklist, Move to Private and Mark an entry. ** If the contact is moved to the private, you can not see the detail information in the Phonebook; it will be find in the Organizer--Private menu--Phonebook. [Note: The default password is 0000] Smart Search You can turn On or Off this function. Add new ♦ It is possible to store phone numbers in three places: • Add to Phone memory/SIM 1 card/ SIM 2 card/ private Move You can move names and phones number from the phone’s memory to SIM card’s memory or from SIM card’s memory to Phone’s memory. The copy options have: One by one, All from SIM1 to phone, All from SIM1 to SIM2, All from SIM2 to phone, All from SIM2 to SIM1, All from phone to SIM1, All from phone to SIM2. Move to private You can move the data from the phone or SIM card to private. The copy options have: One by one, All from SIM1, All from SIM2 or All from phone. Delete You can remove name and phone numbers from selected contacts all at once. ♦ In the Phonebook Menu, select Delete then press OK. Copy ♦ You can copy names and phones number from the phone’s memory to SIM card’s memory or from SIM card’s memory to Phone’s memory. ♦ Copy entry records will both save in SIM and Phone’s memory. Caller groups ♦ You can personalize the ring tone and image when you receive a call from a particular name and phone number. If you want to activate this function, please store names and phone numbers in the phone memory. ♦ Group default name include: Friends, Family, VIP, Business and Others. ♦ After selecting the Group name, you can make Group settings to edit Group name, Ring, tone, image. After each setting, press Done and Save. Speed dials In this function, you can make a call by using the speed dialing keys.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/KL05YC1/User-Guide-1507894-Page-18.png)
![21 ♦ In the message press Options, select Insert template. You can choose templates from the list. ♦ You can add pictures, animations, melodies and sound effects to a text message and format the text using EMS. (Enhanced Messaging Service). In the message press Options, select Advance, select Insert object, the object option list appears: Picture, My picture, Animation, My animation, Sound. ♦ To send the message, press Options, select Send to and SIM options then send option appear, choose send option: Send only, Send and save, Save, Send to many, Send to by group and press OK. • If users select Send only, you should enter the Phone number by yourself or search the contacts by pressing Quick Search (in this page, users can put up to 9 characters to sorting the desired names.) and press OK to send the message. • If users select Send and save / Save, you can choose Save to normal and Save to private. If the message is stored in Private, users need to enter the password to view the detail information of the message. [Note]: The default password is 0000. MMS Create and send a multimedia message. Use navigation key up/down to select message type then press OK. If select “MMS”, the MMS editor screen appear. ♦ Use navigation key to select recipients from the contacts directory, or write the phone number or email address of the recipient in the To field if you are sending a MMS or email to the recipient. You also can edit the phone number or email address of the recipient in the CC and BCC fields if you are sending a MMS or email to the recipient. ♦ To edit the subject of the MMS or email, scroll to Subject field. ♦ Scroll to Edit content, press Edit enter Edit slide text. Press Options, you can select: Done, Input method, My pictures, My sounds, My videos and Insert attachment, Add slide behind, Add slide before, Preview MMS, Slide timing. ♦ To insert a file in the message, scroll to Insert attachment option then press OK. Press Open to link a specific folder in File manager and scroll to the desired file, then press OK and Done. An attached file is indicated with the file name in the message. ♦ To send the message, press Done and send option appear, choose send option: Send, Save, Send options, Exit and press OK. Inbox To check an unread message later: ♦ From SMS menu selects Inbox press OK. ♦ You can select SIM 1 Inbox or SIM 2 Inbox item. ♦ Move to desired message and press OK to enter list. Press Options and inbox option list appears, you can select View, Delete, Delete all, Move to private, Detail and Mark. The message is stored in the inbox folder after you have read it. Outbox ♦ In Idle mode enter Menu, Messages and Outbox than Press OK. ♦ Move to desired message and press Options and inbox option list appears, you can select View, Delete, Delete all, Move to private, detail and Mark. ** If the SMS is moved to the private, you can not see the detail information in the Messages---Inbox/Drafts/Outbox folder, it will be find in the Organizer --- Private menu --- Messages --- Inbox / Drafts / Outbox folder. [Note]: The default password is 0000. Drafts From Message submenu select Drafts move to desired message and press Options, the options list appears you can select from: View, Delete, Delete all, Move to private, Detail, Mark.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/KL05YC1/User-Guide-1507894-Page-20.png)
![26 ♦ Record/Play/Append/Rename/Delete/Delete all/Settings/Set as/Send FM radio recorder scheduler ♦ Press , select Multimedia/FM radio recorder scheduler, press OK to enter submenu of FM radio recorder scheduler. ♦ To set the recorder scheduler, press Edit and set on the radio, key in the date, and time to start and stop. ♦ You can repeat the recorder to Everyday, Once, or Days. ♦ The Record settings can edit Record format (AMR / WAV), Audio Quality (High / Low) or Storage (phone and Card), Record file(New file/ Append file). Melody composer The melody composer application is designed to melody files using the iMelody format prescribed. It allows user to enter key sequence to compile a melody that can be played and set as a ring tone as well. A melody file comprises of seven note types each played for a specified duration of time and can have different pitch and octave. These files are stored using prescribed format as identifiers corresponding to press sequence entered by the user. The application displays the press sequence in a graphical format to allow compilation in a user friendly manner. Settings (Menu 8) Dual SIM settings Within the Dual SIM settings menu, you can select Dual SIM open, Only SIM 1 open, Only SIM 2 open or Flight mode, the GSM operator will follow your setting for this phone network provide. Profiles Within the Profiles menu, you can adjust and customize the phone tone for different events, environments and caller groups. Within the Profiles menu, you can adjust and customize the phone tone for different events, environments and caller groups. ♦ In the idle mode, press Menu and select Profiles and press OK to access the list of profiles: General / Silent / Meeting / Outdoor / Headset / Bluetooth. Use Navigation key to select the profile. Press Options to customize the profile. ♦ You may Press Ok to Activate or Customize or Rename the profile. Display settings ♦ Wallpaper You can set your phone to display a background picture, wallpaper, when the phone is in idle mode. [NOTE]: The wallpaper and screen saver should be less than 1280x1024(for JPG) and 320x240(for GIF). In addition, the file size can’t be over 300kb. ♦ Screen saver The screen saver is activated when the phone is in idle mode and none of the phone’s function been used for a certain time. Press any key to deactivate the screen saver. Turn Settings on to activate the screen saver. With Select, you can choose an image or animation as screen saver from the Default list. And you may also set own picture for Screen Saver, From Gallery. ♦ Themes](https://usermanual.wiki/Cheng-Uei-Precision-Industry/KL05YC1/User-Guide-1507894-Page-25.png)
![28 provider. ♦ Call time reminder Turn function On/Off to remind duration of a call. When this option is set to On, there will be a short beep when duration of a call exceeds the reminder time. ♦ Call time display Turn the function On/Off to show the calling time. ♦ Auto redial Select On and your phone will make a maximum of ten attempts to connect the call after an unsuccessful call attempt. Connection setting ♦ B Bluetooth You can utilize wireless technology of Bluetooth to connect other inclusive devices. The inclusive device may include the mobile phone, the computer and earphone, etc. You can utilize Bluetooth technology transfer image, the film, music and sound file. [NOTE]: After opening the Bluetooth function, will increase the power consumption of the battery. ♦ Network settings The function allows you to set SIM1 or SIM2 network related settings. Band selection The wireless phone described in this guide is approved for use on 900MHz, 1800MHz, 900/1800MHz and Auto networks. You can choose the band from the list ♦ UART setup You may choose between SIM1 or SIM2 network. Security settings The function allows you to set SIM1 or SIM2 security settings. ♦ Pin lock This function allows you to lock the phone with a specific SIM card. The feature is designed to prevent the use of your phone by means of another person’s SIM cards if your phone becomes lost. You can switch on or off to activate the PIN lock function. If you switch PIN Lock on, every time you turn phone on, you need to enter the PIN number to set the request on. ♦ Fixed dialing You can switch mode on and off. This function dials only the numbers in the fixed dialing number (FDN). To save and edit numbers on the list, you need the PIN2 code. ♦ Change PIN code Change PIN cod This allows you to change the PIN number. Change PIN2 code This allows you to change the PIN2 number. ♦ Phone lock You can switch When switch on / Off the Phone lock function to protect your phone. If you select When switch on, you need enter the password to set the request on. [Note]: the default password is 0000. ♦ Auto keypad lock This allows you to lock the phone’s keypad and touch panel to prevent accidental key press. In submenu, select the time that after the last key press/press will be disabled, then press OK. ♦ Change security code This allows you to change the password. ♦ Mobile tracker You can switch mode to Activate or Deactivate. After mobile tracker function active, the mobile will remember the IMSI of the SIM.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/KL05YC1/User-Guide-1507894-Page-27.png)
![29 If mobile phone lost and insert the new SIM, then it will send new SIM card's IMSI automatically for the number set up. [Note]: The default password is 0000. Restore factory ♦ Within this menu you can reset the menu settings to their original values. The security code is needed for this function. [Note]: The default password is 0000. ♦ After you select restore factory, setting values are returned default value. Those value including Profile, Ring tone, Call log, Caller group, Time format, Wallpaper, Screen saver, Themes, WAP setting etc. Organizer (Menu 9) Private menu You can move the Call records, SMS, Phonebook and File manager to the Private menu; if you do not want others see this detail information. [Note]: To enter the submenu of the Private Menu, users need to enter the password. The default password is 0000. ♦ Call record: Press OK to enter the submenu of Call record. You can move into Missed calls/ Dialed calls/ Received calls/ Delete call lists. You can edit them within their submenus. ♦ SMS: Press OK to enter the submenu of Messages. You can move into Write new/ Inbox/ Outbox/ Drafts/ Drafts. Select one and Press Options, then the options list will be shown for you to choose. ♦ Phonebook: • Press OK to enter the phonebook list. Scroll to the desired item; press OK to see the detail information. • The Options of the item have: View, Edit, Delete, Copy to phone memory, Copy to SIM card, Send SMS, Send MMS, Send contact, Add to blacklist, Move to normal and Mark. ♦ File manager: • Press OK to enter the File manager list. Scroll to the desired item; press OK to see the detail information. • The Options of the item have: Open, Create folder, Rename, Sort, Move to normal, Play, View, Forward, Print, Detail, Copy, Move, Delete, Delete all, Mark. ♦ Setting: Change code: Change the private’s password. Stopwatch You can measure time, take intermediate times, or take lap times using the stopwatch. During timing, the other functions of the phone can be used. To set the stopwatch timing in the background, press the end key. Press Menu, select Organizer / Stopwatch, press OK to enter submenu of Stopwatch. Alarm clock The alarm clock uses the time format set for the clock. ♦ Press Menu, select Organizer/Alarm clock, press OK to enter submenu of Alarm clock.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/KL05YC1/User-Guide-1507894-Page-28.png)
![30 ♦ To set the alarm, press Edit and set on the alarm, key in the alarm time. You can set the alarm to repeat, Once, Days or Everyday. ♦ Press Stop to stop the alarm. If you let the phone continue to alarm for a minute or press Snooze, the alarm stops for about 1 minute and then resumes. Calendar ♦ You can use the phone’s calendar to keep track of reminders, calls you need to make, meetings and birthdays. You can set the calendar to sound an alarm when it’s time for you to make a call or to go to a meeting. ♦ Press Menu, select Organizer/Calendar. Press Options to the options list, you can View, View All, Add task, Delete event, View, Jump to date, Week view, Indian Calendar and Onscreen prompts. To do list ♦ In this function, you can View the task, Add task, Edit task, Delete task, and Delete all the list of tasks. You can also select and view a single task. ♦ The task view allows you to view the details of the select task. You can move through the task. ♦ When setting time is coming, the alarm notification is enable, the phone will remain user his activities. Memo ♦ In this function, you can Add the memo, View the memo, Edit memo, Send Note, Delete, and Mark the list of memo. You can also select and view a single memo. ♦ The memo view allows you to view the details of the select memo. You can remember through the memo. ♦ When view this memo, you can press options to Edit, Send Note or Delete. World clock ♦ The screen shows the city name, current date and time. ♦ You can to choose the city and check the local time. Calculator ♦ You can use your phone’s calculator to add, subtract, multiply and divide. ♦ Press , select Organizer/Calculator, and press OK. ♦ With the screen showing a “0”, enter the first number in the calculation. ♦ Use Navigation key to select add, subtract, multiply, and divide then press OK or center key to continue operation. ♦ Press ＃ to enter a decimal point. ♦ Press Clear to start the new calculation. Unit converter ♦ To convert measures such as Weight from one unit (Pound) to another (Kg), press the Menu, and select Organizer then Unit converter. ♦ In the Unit converter submenu, press Options to select converter options, option in Set weight converter is Reverse converter and Set converter. [Note]: the Converter option display is depending on user settings Heath Application program to offer a series of for health consultation, BMI, Menstrual, let you finish body and mind clever health care at the same time. EBook reader EBook reader is an application used to read E-books on your mobile phone. E-books are nothing but electronic book, which can be read on your phone. These E-books are available in various formats.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/KL05YC1/User-Guide-1507894-Page-29.png)
![31 ♦ Formats supported for E-books: • Palm doc (prc and pbd) file format. • Txt format. • TCR format. • Ztxt format. Camera (Menu 10) [Note]: Please obey all local laws governing the taking of picture. Your phone has a digital camera and digital video recorder. You can take pictures, record video clips, view them and send them in MMS. To do this, you must subscribe to these services. Please check with your network operator. The camera lens is on the back of the handset and the display of the handset works as viewfinder. The camera produces pictures in JPEG format and the video clips in motion JPEG format. Please pay attention; if handset is not enough memory to take a new photo, you need to free some by deleting old photos or other files in the File manager. To access this menu, press Multimedia and select Camera. 1. Press the Options to choose camera options. 2. Press to snapshoot this screen. 3. Press Back to go back previous level. 4. Camera’s options menu. ♦ Taking a Photo • The live image appears on the display, and you can use the display as a viewfinder. • To take a photo press to capture. When taking a photo a shutter sound is heard. The phone saves the photo in the Photo album of the Multimedia menu. ♦ To setup camera option Camera options Capture mode Single / Burst shot Mode setting 1. If capture mode set to Burst shot, the mode setting have options are: 4 shots / 6 shots 2. If capture mode set to single shot, the mode setting will be disabling. Save Mode Take and save / Automatic save Scene mode Auto / Night Self timer Off / 5 sec / 10 sec / 15 sec 1 2 3 4](https://usermanual.wiki/Cheng-Uei-Precision-Industry/KL05YC1/User-Guide-1507894-Page-30.png)
![33 paused. [Note]: Because of the small dimension of the speaker, in some cases the audio could be distorted, especially at maximum volume and when there are lots of bass sounds. Therefore, we recommend you to use the stereo headset in order to appreciate the high quality of your music. The Music Player supports: AAC, AAC+, MP3, AMR, WAV, MIDI, iMelody formats. ♦ Playing the audio User can listen to music on the loudspeaker or with headphone. MP3 headphones jack: Only for playing MP3 file. It provides the other user can also listen to the music or sound from MP3 file by his headphones. Use the functions of the four ways Navigation key as describe in the below table: Four Ways Navigation key Audio Play Function Center key X Play(click once)/ Pause (click twice) ■ Stop music ♦ In the Music player menu, pressing List allows access to the following settings. List: You can view all the tracks available on the track list and play the desired track. If you press Options in the Play list, you can: Play/Add/Delete/Rename/Add to ring tone/Detail/Delete all/Settings Music player’s setting options Add / Delete Music to play list • Please turn off the handset before Add/Delete music. • Plug in cable (USB) to handset and PC, screen show three options: Mass storage mode: For add / remove music or image. In the Mass Storage mode, user can add / remove music to handset via PC. COM port: as USB charger. [Note]: When you plug in USB cable, can select Mass storage, the handset will remain power on status. The handset will automatically connect to memory card only. If you want connect to the phone, please power off the handset.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/KL05YC1/User-Guide-1507894-Page-32.png)
![34 To Use Mass storage (USB cable) [NOTE]: System default requirement: PC hardware and software for Windows 2000/XP and above. For more information, please see below “Install USB Software for Window 2000” [NOTE]: Please use USB according to the standard steps as below; otherwise the data may lose or cause damage. If you want to add/remove music and images to the Handset, connect it to a PC with USB cable. ♦ Plug in cable (USB) to handset and PC, screen show four options: Mass storage mode: for add / remove music or image files. Webcam: for connecting with PC as webcam. COM port: as USB charger. Java connection: as a modem to connect internet. ♦ Connecting the handset to PC After connected the handset and PC, choice “Mass Storage” handsets will automatic turn off. The OS will automatically generate two “Removable Disk” in My Computer, one for handset, one for memory card. You can enter the disk to access the data in the handset. You can access to the handset from the Window Explorer (Windows 2000/XP) / File Manager or My Computer and add / erase audio, image or other files to the handset. If you want to remove the USB cable from the handset after adding or erasing files. • Double click the Remove Hardware icon in the taskbar tray. • Select “USB Mass Storage”, then clicks Stop when the message “You can remove hardware now” appears on the screen, and removes the handset. ♦ Copy files into the handset After connecting the handset to a PC successfully, there will be two new disks “Removable Disk” in My computer. Enter the directory stored your music, image, or other files, and select them thru your mouse. After selection, move your mouse on the selected files and click right button of your mouse to select “Copy”, enter the Removable Disk from My Computer, and click right button of your mouse to select “Paste” then the selected files will be copied into the handset.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/KL05YC1/User-Guide-1507894-Page-33.png)
