Chi Mei Communication Systems 0804WMC Wireless Remote Monitoring Controller User Manual FCC ation rev1

Download:
Mirror Download [FCC.gov]
Document ID	994428
Application ID	LOdgP4upKHGdWzw+KyfgQw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	74.51kB (931360 bits)
Date Submitted	2008-09-03 00:00:00
Date Available	2008-09-03 00:00:00
Creation Date	2008-08-29 13:45:10
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2008-09-02 19:36:42
Document Title	Microsoft Word - FCC documentation_rev1.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	May

True Tracker System
Overview
Safety and General Information
Installation should be performed by a licensed electrician in accordance with the
National Electrical Code (NEC) and all local electrical code requirements. Read and
understand all instructions before installing, servicing, or operating. Failure to do so
could result in serious injuries or property damage.
This section contains important information on the safe and efficient operation of your
wireless telemetry device. Read this information before using your wireless telemetry
device.
Exposure to Radio Frequency (RF) Energy
Your wireless device contains a transmitter and a receiver. When it is ON, it receives and
transmits RF energy. When you communicate with the wireless device, the system
handling your call controls the power level at which the wireless device transmits.
Your wireless telemetry device is designed to comply with local regulatory requirements
in your country concerning exposure of human beings to RF energy.
Operational Precautions
To assure optimal wireless device performance and to be sure human exposure to RF
energy does not exceed the guidelines set forth in the relevant standards; always follow
these instructions and precautions.
External Antenna Care
If your device has an external antenna, use only the supplied or approved replacement
antenna. Use of an unauthorized antenna, modifications, or attachments could
damage your device and/or may result in the device not complying with local
regulatory requirements in your country. DO NOT hold the external antenna when the
device is IN USE. Holding the external antenna affects signal quality and may cause the
device to operate at a higher power level than needed.
RF Energy Interference/Compatibility
Nearly every electronic device is susceptible to RF energy interference from external
sources if inadequately shielded, designed or otherwise configured for RF energy
compatibility. In some cases your wireless device may cause interference with other
devices.
Follow Instructions to Avoid Interference Problems
Do not use your wireless device in any location where posted notices instruct you not to
use RF devices such as mobile phones. These locations include hospitals or health care
facilities that may be using equipment that is sensitive to external RF energy.
Pacemakers
• ALWAYS keep the wireless device more than 20 centimeters (8 inches) from your
pacemaker when the wireless device is turned on.
• Turn OFF the wireless device immediately if you have any reason to suspect that
interference is taking place.
Hearing Aids
Some digital wireless devices may interfere with some hearing aids. In the event of such
interference, you may want to consult your hearing aid manufacturer or physician to
discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the physician or the
manufacturer of your device to determine if it is adequately shielded from RF energy.
Damaged Products
If your wireless device or battery has been submerged in water, punctured, or
subjected to a severe fall, do not use it until you take it to an authorized service center.
Do not attempt to dry it with an external heat source, such as a microwave oven.
Batteries and Chargers
Only use the provided or approved battery or charger with the device.
Caution: To avoid risk of personal injury, do not dispose of your battery in a fire.
Table of Contents
Recycling Information .................................................................................................................... 5
Installation......................................................................................................................................... 5
Servicing............................................................................................................................................ 5
Conformance/Compliance .......................................................................................................... 6
Specifications
Dimensions:
250mm x 200mm x 90mm
9.8” x 7.9” x 3.5”
Operating Temperature Range:
-20 C to +40 C
+14 F to 104 F
Power Supply Requirements:
supply
120VAC to 6V internal power
Note: Some models can accept 12V
supply from backup battery
Communication Interface:
GSM Cellular
Maximum Length of External Antenna Cable:
61cm (24 inches)
Maximum Length of Cable from Sensor to Controller: 22.9m (75 feet)
Recycling Information
Your battery and/or wireless device may require recycling in accordance with local
laws. Contact your local regulatory authorities for more information.
Installation
Installation should be performed by a licensed electrician in accordance with the
National Electrical Code (NEC) and all local electrical code requirements. Read and
understand all instructions before installing, servicing, or operating. Failure to do so
could result in serious personal injuries or property damage.
For installation guidelines refer to the Installation Guide
Servicing
There are no user serviceable parts in this device. Consult your dealer for instruction on
how to get a device serviced.
Conformance/Compliance
This device complies with Part 15 of FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause any harmful interference, and (2) this device
must accept and interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio technician for help.
The antenna (s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. A wireless device is defined as a
transmitting device designed to be used in fixed locations and to be generally used in
such a way that a separation distance of at least 20 centimeters is normally maintained
between the transmitter＇s radiating structures and the body of the user or nearby
persons. Transmitters designed to be used by consumers or workers that can be easily
re-located are considered wireless device if they meet the 20 centimeter separation
requirement. The FCC rules for evaluating mobile devices for RF compliance are found
in 47 CFR 2.1091. Failure to observe these restrictions will result in exceeding the FCC RF
exposure limits.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:09:02 19:36:42+08:00
Create Date                     : 2008:08:29 13:45:10+08:00
Metadata Date                   : 2008:09:02 19:36:42+08:00
Format                          : application/pdf
Title                           : Microsoft Word - FCC documentation_rev1.doc
Creator                         : May
Document ID                     : uuid:397883b8-fbdd-4217-9a8f-0d01b18d37e7
Instance ID                     : uuid:0505113c-a748-43b3-8a25-76c35e0b717a
Page Count                      : 6
Author                          : May

EXIF Metadata provided by EXIF.tools