Chiayo Electronics Co DCR-511 2.4G Digital Two-Way Tour Guide System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2330512
Application ID	LXAN1gnjPlMvmx0cBrrsBw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.79kB (172356 bits)
Date Submitted	2014-07-21 00:00:00
Date Available	2014-07-21 00:00:00
Creation Date	2014-06-16 09:41:31
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2014-07-03 17:58:40
Document Title	User Manual
Document Creator	Microsoft® Office Word 2007
Document Author:	antonio

DCT-511
DCR-511
2.4G DIGITAL TWO-WAY TOUR GUIDE SYSTEM
OPERATION MANUAL
ISO 9001:2008
R EG ISTER ED
IS O
140 01
ISO 14001
R EG ISTER ED
OHSAS
180 01
OHSAS 18001
Green Product
DCT-511 Mini transmitter
Parts and functions
1. Antenna
2. Mute
3. Volume control
4. Power/frequency synchronizing
5. MIC-MIX-AUX IN mode switch
6. Aux input (Ø 3.5mm)
7 8 9
10
11
7. Power indicator
8. Mute indicator
9. Earphone jack (Ø 3.5mm)
10. Mini USB charging port
11. Reset
Instructions
1. Mute: Press to activate or cancel muting.
2. Aux input: You may play music files in your device as background music
by connecting to the transmitter. In a museum, you may also play
respective introductions recorded for different galleries.
3. Audio mode switch: If using only earphone, please switch to . For only
music play, please switch to
. To simultaneously use earphone
and play music, please switch to middle.
4. Power and charging: Press the power button one second to turn on the
transmitter and the indicator will light green. It turns red when battery low
or during charging. It lights off once the battery is full. The charging
process takes approximately four hours.
-1-
ISO 9001 / ISO 14001 / OHSAS 18001
DCR-511 Mini receiver
Parts and functions
5 6 7
1. Antenna
2. Press to talk
3. Volume control
4. Power/frequency synchronizing
5. Power indicator
6. Reception indicator
7. Earphone jack (Ø 3.5mm)
8. Mini USB charging port
9. Reset
Instructions
1. Talking: Press the talk button to talk with your guide and the conversation
could be heard by other members. And release to stop.
2. Reception indicator: The LED stays green within the reception from the
tour guide. Once beyond the reception range, it will flash red and beep as
a warning of dropout.
3. Power and charging: Press the power button one second to turn on the
transmitter and the indicator will light green. It turns red when battery low
or during charging. It lights off once the battery is full. The charging
process takes approximately four hours.
-2-
Frequency synchronizing between DCT-511 and DCR-511
1. Before the synchronizing, please power off the device.
2. Press DCT-511’s power button for five seconds till the mute indicator
flashes green, which implies readiness to synchronize.
3. Press DCR-511’s power button for five seconds till the reception indicator
flashes green, which implies readiness to synchronize. Both mute and
reception indicators will light green after the setting is completed.
4. DCT-511’s mute indicator will stop flashing after a setting period of about
twelve seconds.
5. DCR-511’s reception indicator will stop flashing after a setting period of
about twelve seconds.
6. To synchronize mass receivers with the transmitter, just to follow STEP 2
on all receivers simultaneously.
7. If the power indicator glows red, it means battery low and needs to be
recharged. The system paring can be made only after the charging
process is finished.
-3-
ISO 9001 / ISO 14001 / OHSAS 18001
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following
measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment. (Example - use only shielded interface cables
when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
-4-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : antonio
Create Date                     : 2014:06:16 09:41:31Z
Modify Date                     : 2014:07:03 17:58:40+08:00
Has XFA                         : No
Language                        : zh-TW
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : antonio
Creator Tool                    : Microsoft® Office Word 2007
Metadata Date                   : 2014:07:03 17:58:40+08:00
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:87e71f5e-ded4-4151-945b-4036f0d01e3b
Instance ID                     : uuid:b3aab212-642c-4a78-92c9-8e95c9bc3249
Page Count                      : 5

EXIF Metadata provided by EXIF.tools