Chiayo Electronics Co SM-6100IRDAB Wireless Beltpack Transmitter User Manual
Chiayo Electronics Co Ltd Wireless Beltpack Transmitter Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3798007 |
| Application ID | /bVmE+keZQj1OAbrSjn0FA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 40.81kB (510100 bits) |
| Date Submitted | 2018-03-27 00:00:00 |
| Date Available | 2018-03-27 00:00:00 |
| Creation Date | 2018-03-02 18:04:30 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2018-03-02 18:04:52 |
| Document Title | Users Manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | antonio |
Operation manual SM-6100 IrDA UHF Belt-pack Transmitter NDR-3120 UHF Dual-Channe CHIAYO ELECTRONICS CO.,LTD. SM-6100 IrDA UHF Belt-pack Transmitter Parts and functions Antenna Setting button MENU Menu button SET LCD Cover release button High-impedance gain control IrDA synchronizing button Low-impedance gain control Battery compartment Power switch Battery power LED IrDA sensor area Audio input connector Charging contacts Instructions Battery installation & indicator ●►○ ● When the transmitter is switched ON, the battery power LED (red) will blink once to denote the batteries installed are in good condition If the LED remains illuminated the batteries have expired and require replacement. This transmitter requires 2 x AA batteries to operate. To install, open the battery cover using the cover release buttons and insert the batteries into the battery compartment. Note: Batteries contain a corrosive acid that may leak and damage the transmitter when stored for a long period. Batteries should be removed from the transmitter before storing without use for more than 4 weeks. SM-6100 IrDA UHF Belt-pack Transmitter Channel setting Use MENU button to go to the CHANNEL｜FREQUENCY page. Press and hold the SET button for 3 seconds, then the upperright channel number will flash to allow changes to be made. Press SET / MENU buttons to change the channel number. The corresponding frequency will change accordingly. 3 seconds after selecting a channel, it will be automatically saved. Instructions Channel synchronizing of the receiver and transmitter 630000 RF 10~30cm 30cm SQ FREQ VOL SET Align infrared areas of the receiver and transmitter within 30cm. Changing the receiver’s channel STEP 1 Press the synchronizing button of the transmitter. STEP 2 The transmitter's LED will grow to denote transmitting the frequency to the receiver and synchronizing the channels. CH RF 00 1 A B CH 630000 SQ FREQ VOL AF SDR-6120 RF 00 1 Changing the transmitter’s channel STEP 1 Press the synchronizing button of the receiver and the receiver will transmit the frequency to the transmitter and synchronize the channels STEP 2 The transmitter's LED will grow to denote its channel synchronized by the receiver. A B 630000 SQ FREQ VOL AF Wireless Receiver SET SYNC SET SYNC If it doesn’t work check that you have the IR sensor panels aligned, that they are facing each other, devices are within 30cm of each other, and try again. SM-6100 IrDA UHF Belt-pack Transmitter Battery type setting Use MENU button to go to the BATTERY TYPE page. Press and hold SET button for 3 seconds, then the cursor will flash to allow changes to be made. Press SET button to select either NiMH (rechargeable battery) or AKLN (alkaline battery). 3 seconds after selecting a battery type, it will be automatically saved. Instructions GAIN setting (GT｜MT) Gain control enables the user to set different output levels. ▼ ▼ GT (LEFT) is for the use of instrument with high impedance, such as guitar. MT (RIGHT)is for the use of low impedance such as lapel or headset microphones This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. THIS DEVICE COMPLIES WITH PART 15C OF THE FCC RULES. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This device complied with FCC radiation exposure limits as set forth for an uncontrolled environment. This device should be installed and operated so that its antenna(s) are not co-located or operating in conjunction with any other antenna or transmitter CE Frequency: 470~789 MHz, Maximal power: 6 mW Frequency: 823~832 MHz, Maximal power: 7.2 mW CE declaration info: www.chiayo.com.tw/declaration.html CHIAYO ELECTRONICS CO.,LTD. Http://www.chiayo.com.tw｜Email: sales@chiayo.com.tw Office: 30, Lane 27, Section 4, Jen-Ai Road, Taipei 10685, Taiwan Tel: 886-2-27415741｜Fax: 886-2-27525242 Factory: 88, Chung-Hsiao Street 2, Chiayi 60080, Taiwan Tel: 886-5-2711000｜Fax: 886-5-5767611
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : antonio Create Date : 2018:03:02 18:04:30+08:00 Modify Date : 2018:03:02 18:04:52+08:00 Has XFA : No Language : zh-TW Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : antonio Creator Tool : Microsoft® Word 2010 Metadata Date : 2018:03:02 18:04:52+08:00 Producer : Microsoft® Word 2010 Document ID : uuid:22e6c5f3-f10b-4313-b0db-6672bd2aaead Instance ID : uuid:d785875e-7e98-459d-8a29-dd2b061881d0 Page Count : 8EXIF Metadata provided by EXIF.tools