Chiayo Electronics Co SQ-6100IRDAB Wireless Microphone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3797985
Application ID	Kxu9Y/EBrZN6JI9Gxx4V5Q==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	38.73kB (484134 bits)
Date Submitted	2018-03-27 00:00:00
Date Available	2018-03-27 00:00:00
Creation Date	2018-03-02 18:05:11
Producing Software	Microsoft® Word 2010
Document Lastmod	2018-03-02 18:05:30
Document Title	Users Manual
Document Creator	Microsoft® Word 2010
Document Author:	antonio

Operation manual
SQ-6100 IrDA
UHF Handheld Microphone
CHIAYO ELECTRONICS CO.,LTD.
SQ-6100 IrDA UHF Handheld Microphone
Parts and functions
Cartridge
Battery power LED
Power switch
LCD
Setting button
Menu button
IrDA synchronizing button
Battery compartment
Color cap
Charging port
Instructions
Battery installation & indicator
●►○
●
When the transmitter is switched
ON, a blue LED will blink once to
denote the batteries installed are
in good condition.
If the LED remains illuminated, it
means the batteries are weak and
require replacement.
This transmitter requires 2 x AA
batteries to operate.
To install, remove the battery cover
and slide the batteries into the
battery compartment & replace the
battery cover.
Note: Batteries contain a corrosive acid that may leak and damage the
transmitter when stored for a long period. Batteries should be removed
from the transmitter before storing without use for more than 4 weeks.
SQ-6100 IrDA UHF Handheld Microphone
Channel setting
Use MENU button to go to the CHANNEL｜FREQUENCY
page.
Press and hold the SET button for 3 seconds, then the upperright channel number will flash to allow changes to be made.
Press SET / MENU buttons to change the channel number. The
corresponding frequency will change accordingly.
3 seconds after selecting a channel, it will be automatically
saved.
Instructions
Channel synchronizing of the receiver and transmitter
RF
630000
SQ
10~30cm
30cm
FREQ
VOL
S ET
Align infrared areas of the receiver and transmitter within 10~30cm.
Changing the receiver’s channel
STEP 1 Press the synchronizing
button of the transmitter.
STEP 2 The transmitter's LED will
grow to denote transmitting the
frequency to the receiver and
synchronizing the channels.
CH
RF
00 1
A B
CH
630000
SQ
FREQ
VOL AF
SDR-6120
RF
00 1
A B
630000
SQ
FREQ
VOL AF
Wireless Receiver
SET
SYNC
SET
SYNC
Changing the transmitter’s
channel
STEP 1 Press the
synchronizing button of the
receiver and the receiver will
transmit the frequency to the
transmitter and synchronize the
channels
STEP 2 The transmitter's LED
will grow to denote its channel
synchronized by the receiver.
If it doesn’t work check that you have the IR sensor panels aligned, that
they are facing each other, devices are within 10~30cm of each other, and
try again.
SQ-6100 IrDA UHF Handheld Microphone
Battery type setting
Use MENU button to go to the BATTERY TYPE page.
Press and hold SET button for 3 seconds, then the cursor will
flash to allow changes to be made.
Press SET button to select either NiMH (rechargeable battery)
or AKLN (alkaline battery).
3 seconds after selecting a battery type, it will be automatically
saved.
Instructions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
THIS DEVICE COMPLIES WITH PART 15C OF THE FCC RULES. This equipment complies with
FCC RF radiation exposure limits set forth for an uncontrolled environment.
FCC Caution: To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to operate this
equipment. (Example - use only shielded interface cables when connecting to computer or
peripheral devices).
FCC Radiation Exposure Statement
This device complied with FCC radiation exposure limits as set forth for an uncontrolled
environment. This device should be installed and operated so that its
antenna(s) are not co-located or operating in conjunction with any other antenna or transmitter
CE
 Frequency: 470~789 MHz, Maximal power: 4.8 mW
 Frequency: 823~832 MHz, Maximal power: 1.2 mW
 CE declaration info: www.chiayo.com.tw/declaration.html
CHIAYO ELECTRONICS CO.,LTD.
Http://www.chiayo.com.tw｜Email: sales@chiayo.com.tw
Office: 30, Lane 27, Section 4, Jen-Ai Road, Taipei 10685, Taiwan
Tel: 886-2-27415741｜Fax: 886-2-27525242
Factory: 88, Chung-Hsiao Street 2, Chiayi 60080, Taiwan
Tel: 886-5-2711000｜Fax: 886-5-5767611

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : antonio
Create Date                     : 2018:03:02 18:05:11+08:00
Modify Date                     : 2018:03:02 18:05:30+08:00
Has XFA                         : No
Language                        : zh-TW
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : antonio
Creator Tool                    : Microsoft® Word 2010
Metadata Date                   : 2018:03:02 18:05:30+08:00
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:8ddd9b43-2b48-439c-adfb-be517a647ffc
Instance ID                     : uuid:7028634f-8581-4cc0-b338-7cc76bc20d7f
Page Count                      : 8

EXIF Metadata provided by EXIF.tools