Chic Technology RMO215 WIRELESS OPTICAL MOUSE User Manual PMU MRF00021 A1

Chic Technology Corporation WIRELESS OPTICAL MOUSE PMU MRF00021 A1

users manual

Download: Chic Technology RMO215 WIRELESS OPTICAL MOUSE User Manual PMU MRF00021 A1
Mirror Download [FCC.gov]Chic Technology RMO215 WIRELESS OPTICAL MOUSE User Manual PMU MRF00021 A1
Document ID386498
Application IDs6ipVnOlB3qy1fw57BQxow==
Document Descriptionusers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize17.21kB (215142 bits)
Date Submitted2004-01-06 00:00:00
Date Available2004-01-06 00:00:00
Creation Date2003-11-26 11:48:37
Producing SoftwareCorel PDF Engine Version 9.397
Document Lastmod2003-11-26 11:48:37
Document TitlePMU-MRF00021_A1
Document CreatorCorelDRAW Version 9.397
Document Author: Amanda_Kuo

Office Mini
Wireless Optical Mouse
User's Quick Guide
Office Mini Wireless Optical Mouse
a 2003 All Rights Reserved. The copyright is the property of its respective owners.
Notice:
Federal Communications Commission (FCC) requirements, Part 15
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the user's
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
-------------------------------------------------------------------------------------------------------------------------------------------------------Essential requirements - Article 3
Protection requirements for health and safety - Article 3.1a
--Testing for electric safety according to EN 60950 has been conducted. These are considered relevant and sufficient.
Protection requirements for electromagnetic compatibility -Article 3.1b
--Testing for electromagnetic compatibility according to EN 301 489-1, EN 301 489-17 and EN 55024 has been conducted.
These are considered relevant and sufficient.
Effective use of the radio spectrum -Article 3.2
--Testing for radio test suites according to EN 300 328-2 has been conducted. These are considered relevant and sufficient.
Congratulations on your purchase of this Office Mini Wireless Optical Mouse.
Please carefully read the User's Quick Guide to learn about the installation and
the powerful functions of your new Office Mini Wireless Optical Mouse.
Contents of the Package
Office Mini Wireless Optical Mouse
Mini Receiver (USB or UP Combo)
Two AAA Batteries
Office Mouse Driver CD-ROM
User's Quick Guide
Optional Parts
(The optional parts may be different due to various wireless optical mice.)
& AC to DC Adapter
& USB to DC Cable
Install Hardware
Notice:
- If you are running Windows 98 and plug the connector into the computer, you
may find a pop-up window that requires to insert the Windows 98 CD-ROM.
Please follow the window instruction to install the required driver or set the
Office Mini Wireless Optical Mouse
driver path as "Windows\system" or the other path
that the driver located.
Put the batteries into the battery case
1. Place your thumbs on the top of the mouse.
2. Press slightly and push out the top case.
3. Insert the batteries and then close the top case.
Connect the Receiver to Your Computer
1. USB Connector: Plug the connector of the mini
receiver into the USB port of the computer.
2. USB to PS/2 Connector: Connect the USB to PS/2
connector to the mini receiver and then plug the
connector to the PS/2 port of the computer.
USB Port
PS/2 Port
Link the Mouse with the Receiver
1. Turn on the computer. The LED indicator on the
receiver will light.
2. Press the ID Link Button at the bottom of the
mini receiver and the LED indicator will blink. The receiver is ready to
automatically link with the mouse.
3. Press the ID Link Button on the back of the mouse. The indicator will stay in
light while successfully finish the linkage.
4. The LED indicator will blink while you move the mouse.
5. If you need to re-link the mouse or after changing the mouse batteries,
please repeat the above linkage step 1~3.
6. If the mouse is interfered by other wireless-mouse users nearby, please
change the Link ID by re-linkage
immediately.
7. There are 256 Link IDs.
8. The scroll wheel of the mouse will light while
the mouse is low battery. Please change the
batteries immediately.
9. Press any button to wake up the mouse while
the mouse is in the sleeping mode.
Install Driver
Notice:
- The driver supports Windows 98, Windows NT,
Windows 2000, Windows ME and Windows XP.
- When you change the interface port, please
reinstall the driver.
1. Insert the driver CD-ROM to your computer.
The PC system may automatically install the
Office Mini Wireless Optical Mouse
driver through selecting the PC auto-install function.
2. If the PC system does not set the auto-install function, please double
click the file Setup.exe and follow the setup instructions to
complete the driver installation.
3. Restart the computer.
4. A Mouse Setting icon will appear on the task bar of Windows after you
successfully finish the installation.
5. Double click the Mouse Setting icon and then follow the instructions of the
selection items to set the mouse properties.
6. Introduction of the Office Application Software: You can simply apply the
Office application functions through the one-touch hot key on the top of the
Office
mouse.
Word
Excel
Open
Save
Outlook
Access
My Document
PowerPoint
Re-do
New
My Computer
Un-do
Bold
Print
IE
Close Application
Find
Close Application
Uninstall Driver
Mouse Software can be removed from Windows by clicking the Add/Remove
Programs icon in the Control Panel or clicking the "Uninstall" icon in the folder
that Setup.exe created in "Programs" of "Start". Select Mouse Software
installed and click the "Remove" button.
Charge Mode
Notice:
- Please skip this section if your mouse is not rechargeable.
- There are two charge modes for the rechargeable version.
Some mice may have only one charge modes.
- Please use rechargeable batteries for the chargeable mouse.
- At the first time of usage, please charge the AAA batteries at least 6 to 8 hours.
Office Mini Wireless Optical Mouse
1. Charge from PC: Connect the mouse to the USB port of the computer with the
USB to DC cable.
2. Charge through Adapter: Connect the mouse with the AC to DC adapter.
Notification
- This equipment is intended for use in the following countries.
18 European Countries:
Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland,
Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland
and United Kingdom
- Please do not change the frequency, features and functions of wireless mice
from the original design.
- The optical technology can precisely detect the mouse motion on most surfaces.
Please avoid using the optical mouse on any reflective, transparent, metallic or
complex-pattern surface.
- Recommendation: please do not use the mouse during charge periods.
- The LED indicator or the scroll wheel on the mouse will light while the mouse is
low battery. Please recharge or change the batteries immediately.
- Press any button to wake up the mouse while the mouse is in the sleeping
mode.
- While not click the Office hot key, the Office pop-up window appears and there
is no any reaction from the right button. Please eliminate the situation by
repeatedly clicking the Office hot key.
- Please avoid using the mice under the following conditions.
% Direct sunlight
% Extreme hot, cold, dusty or magnetic environment
% Near by fax machine, television, radio, mobile phone or any wireless device
% Metal surface
- Notices for wireless mice:
% Install the driver properly.
% Check the distance between the mouse and the receiver. (The max. operation
distance is 1 meter.)
% Place the positive and the negative of the battery in the right direction.
% Link the mouse with the receiver properly.
- If the product is malfunction, please change or recharge the batteries, or move
the receiver away from the computer and the monitor.
Trouble Shooting
Question 1: No mouse movement.
Solution:
1) Make sure the software that you are using supports a mouse.
2) Check that mouse is plugged into the relevant port at the back of computer.
3) Ensure that mouse driver is installed into system.
Office Mini Wireless Optical Mouse
Question 2: The cursor on the screen remains at one spot or moves erratically.
Solution:
1) Check the mouse cable for any breaks or sharp twists. Examine the cable
closely where it connects to the mouse.
Question 3: The cursor movement stops at a corner and no longer responds to
the mouse movement.
Solution:
1) Run the mouse driver to check which mode the mouse is operating in.
2) If the mouse is wireless, please check the battery power or re-link the
mouse.
Question 4: Mouse movement does not produce corresponding cursor movement
or there is a brief pause during movement.
Solution:
1) Check the connecter or the cables of the mouse and the receiver if there is
any break or tangled.
2) Check the distance between the mouse and the receiver.
Question 5: Displayed error number -115 on screen when install mouse driver
software.
Solution:
1) The error usually occurs because a virus-checking program is being used on
the System to prevent files from being renamed. Please shutdown any virus
checking software running on the system and then run the setup again.
Question 6: Detection problems of the mouse
Solution: If your mouse is connected to the mouse port and is not detected by
the system, attempt the following step(s):
1) Please check the mouse port setting from the computer.
2) If you have a mouse with a mouse port adapter, please connect the mouse to
the computer through the mouse port adapter. Restart the computer and
check if the mouse is detected properly.
3) If the problem persists, please check for a possible computer BIOS ROM
upgrade from your computer manufacturer.
4) Some notebook systems, such as IBM Thinkpad, have both an external
Mouse Port and an integrated Pointing Stick, which is connected to the
Mouse Port. If your mouse is having difficulty running on the Mouse Port of
this type of system, please other ports.
Question 7: Conflicts with other Devices
Solution:
1) Some softwares, provided by other manufacturers, include mouse functions,
which may conflict with the Office mouse. We recommend you to remove the
software installed previously and then install the Office mouse software.
Question 8: Too much interference to the wireless mouse
Office Mini Wireless Optical Mouse
Solution:
1) Change the location of the receiver.
2) Please remain a certain distance from other high-voltage or wireless devices.
Question 9: Problems of operating the wheel
Solution:
1) Verify that the "Browser Mouse" or "Mouse Control Panel" application is
installed properly. If you do not find the "Browser Mouse" or "Mouse Control
Panel" icon in the system tray, you need to reinstall mouse software.
2) Please install the mouse driver while the OS is under Windows 98.
3) Some other applications with mouse scrolling function may conflict with this
mouse function. Remove these applications before install the Office mouse
software.
PMU-MRF00021 / MADE IN CHINA

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 8
Create Date                     : 2003:11:26 11:48:37
Modify Date                     : 2003:11:26 11:48:37
Producer                        : Corel PDF Engine Version 9.397
Author                          : Amanda_Kuo
Creator                         : CorelDRAW Version 9.397
Title                           : PMU-MRF00021_A1
Keywords                        : C215, V2, ¥[, CE, ĵ»y
EXIF Metadata provided by EXIF.tools
FCC ID Filing: IOWRMO215

Navigation menu