Chic Technology RMO231UP Navigator Wireless Optical Mouse User Manual PMU MOP00006

Download:
Mirror Download [FCC.gov]
Document ID	415691
Application ID	45LfweUAaWDqg0RtJdt3nA==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.11kB (176327 bits)
Date Submitted	2004-04-20 00:00:00
Date Available	2004-04-19 00:00:00
Creation Date	2004-03-16 16:21:36
Producing Software	Corel PDF Engine Version 9.397
Document Lastmod	2004-03-16 16:21:36
Document Title	PMU-MOP00006.cdr
Document Creator	CorelDRAW Version 9.397
Document Author:	Amanda_Kuo

Navigator Mouse
User's Quick Guide
Navigator Mouse
© 2004 All Rights Reserved. The copyright is the property of its respective owners.
Federal Communications Commission (FCC) requirements, Part 15
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
__Reorient or relocate the receiving antenna.
__Increase the separation between the equipment and receiver.
__Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
__Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the user's authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
CE Declaration Of Conformity
Hereby, the manufacturer, declares that this Navigator Mouse is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Essential requirements _ Article 3
Protection requirements for health and safety _ Article 3.1a
__Testing for electric safety according to EN 60950 has been conducted. These are considered relevant and sufficient.
Protection requirements for electromagnetic compatibility _Article 3.1b
__Testing for electromagnetic compatibility according to EN 301 489_1 and EN 301 489_03 has been conducted. These are
considered relevant and sufficient.
Effective use of the radio spectrum _Article 3.2
__Testing for radio test suites according to EN 300 220_3 has been conducted. These are considered relevant and sufficient.
Congratulations on your purchase of this Navigator Mouse.
Please carefully read the User's Quick Guide to learn about the
installation and the powerful functions of your new Navigator
Mouse.
Contents of the Package
ü
ü
ü
ü
ü
Navigator Mouse (Wireless Optical or Wired Optical)
Receiver for Wireless Optical Mouse
Two AA Batteries for Wireless Optical Mouse
Mouse Driver CD-ROM
User's Quick Guide
ü Optional Parts for Wireless Optical Mouse
(The optional parts may be different due to various wireless
optical mice.)
Navigator Mouse
& AC to DC Adapter
& USB to DC Cable
Install Hardware
Note:
- If you install a wired Navigator mouse, please skip the sections
of "Install Receiver", "Select Mouse Channel" and "Link Mouse and
Receiver".
- If you install a wireless Navigator mouse, please skip the section
"Install Wired Mouse".
- If you are running Windows 98 and plug the connector into the
computer, you may find a pop-up window that requires to insert
the Windows 98 CD-ROM. Please follow the window instruction to
install the required driver or set the driver path as "Windows \
system" or the other path that the driver located.
& Install Wired Mouse
1) PS/2 Version: Please turn off the computer.
Plug the PS/2 connector of the mouse to the
computer.
2) USB Version: You may turn on the computer.
Plug the USB connecter of the mouse to the
computer.
3) USB to PS/2 Version: Turn off the computer.
Plug the adapter of the USB to PS/2 to the
mouse USB connector and then connect to the
computer.
PS/2 Port
USB Port
Combo Port
& Install Receiver
1) PS/2 Version: Please turn off the computer.
Plug the PS/2 connector of the receiver to the computer.
2) USB Version: You may turn on the computer. Plug the USB
connector of the receiver to the computer.
Navigator Mouse
3) USB to PS/2 Version: Turn off the computer. Plug the adapter
of the USB to PS/2 to the receiver USB connector and then
connect to the computer.
& Select Mouse Channel
1) The two-channel switch is located at the back of the mouse or
inside the battery case. Select Channel "1" or "2".
2) Put the batteries into the battery case.
& Link Mouse with Receiver
1) Turn on the computer. The LED indicator on the receiver will
light.
2) Press the ID Link Button on the receiver and the LED
indicator will blink. The receiver is ready to automatically link
with the mouse.
3) Press the ID Link Button on the back of the mouse. The
indicator will stay in light while successfully finish the linkage.
4) The LED indicator will blink while you move the mouse.
5) If the selected channel is interfered by other wireless-mouse
users nearby, please change the Link ID by re-linkage or
select the other channel immediately.
6) If you need to re-link the mouse or after changing the mouse
batteries, please repeat the above linkage step 1~3.
7) There are 256 Link IDs per channel.
Install Software
Note:
- The driver supports Windows 98, Windows NT, Windows 2000,
Windows ME and Windows XP.
- When you change the interface port, please reinstall the driver.
& Install Driver
1) Insert the driver CD-ROM to your computer. The PC system
Navigator Mouse
may automatically install the driver
through selecting the PC autoinstall function.
2) If the PC system does not set the
auto_install function, please double
click the file "Setup.exe" and follow
the setup instructions to complete
the driver installation.
3) Restart the computer. A Mouse
Setting icon will appear on
the task bar of Windows
after you successfully finish
the installation.
& Set Mouse Functions
New
Find
1) Double left click or right click the
Open
Mouse Setting icon.
Mail Link
2) Follow the instructions of the
Mail Web Page
Save
selection items to set the mouse
Append
properties.
ReFresh
My Favorite
3) The functions of the 4th and the
5th mouse buttons must be enable
and set through the Mouse Setting application. Please do
not select the function "System Default" for the 4th and 5th
buttons.
4) The functions of the 6th and the 7th mouse buttons are
"Page Up" and "Page Down".
& Introduce Navigator Application Software
1) You can simply apply the Navigator application functions
under Windows systems. Press the "Navigator" one-touch
hot key. You can find a circular menu. Choose the function
and click the left button to execute the selected function.
The functions of the selection menu:
Navigator Mouse
"New", "Find", "Mail Link", "Mail Web Page", "My Favorites",
"Refresh", "Save" and "Open".
2) Click the icon "X" in the middle of the menu to close the
selection menu.
Uninstall Driver
Mouse Software can be removed from Windows by clicking the
Add/Remove Programs icon in the Control Panel or clicking the
"Uninstall" icon in the folder that "Setup.exe" created in
"Programs" of "Start" on Windows desktop. Select Mouse
Software installed and click the "Remove" button.
Charge Mode and Battery Notice
Note:
- Please skip this section if the mouse is wired.
& Charge by Receiver: The receiver must be connected with the
required AC to DC adapter or the USB to DC cable in advance
and then place the mouse on the receiver precisely.
& Please select rechargeable batteries for the wireless optical
mice. At the first time of usage, please charge the AA
batteries at least 10 to 12 hours.
& The LED indicator or the scroll wheel on the mouse will light
while the mouse is low battery. Please recharge or change the
batteries immediately.
& Press any button to wake up the mouse while the mouse is in
the sleeping mode.
Notification
& The wireless equipment is intended for use in the following
countries.
Navigator Mouse
18 European Countries:
Austria, Belgium, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom
Please do not change the frequency, features and functions of
wireless mice from the original design.
The optical technology can precisely detect the mouse motion
on most surfaces. Please avoid using the optical mouse on
any reflection, transparent or complex-pattern surface.
Please avoid using the mice under the following conditions.
- Direct sunlight
- Extreme hot, cold, dusty or magnetic environment
- Near by fax machine, television, radio, mobile phone or any
wireless device
- Metal surface
Notices for wireless mice:
- Install the driver properly.
- Check the distance between the mouse and the receiver.
(The max. operation distance is 2 meter.)
- Place the positive and the negative of the battery in the right
direction.
- Link the mouse with the receiver properly.
If the wireless product is malfunction, please change or
recharge the batteries, or move the receiver away from the
computer and the monitor.
Trouble Shooting
Question 1:
No mouse movement.
Solution:
1) Make sure the software that you are using supports a
mouse.
2) Check that mouse is plugged into serial port at the back of
Navigator Mouse
computer.
3) Ensure that mouse driver is installed into system.
Question 2:
The cursor on the screen remains at one spot or moves
erratically.
Solution:
Check the mouse cable for any breaks or sharp twists.
Examine the cable closely where it connects to the mouse.
Question 3:
The cursor movement stops at a corner and no longer
responds to the mouse movement.
Solution:
1) Run the mouse driver to check which mode the mouse is
operating in.
2) If the mouse is wireless, please check the battery power or
re-link the mouse.
Question 4:
Mouse movement does not produce corresponding cursor
movement or there is a brief pause during movement.
Solution:
1) Clean the silicon rubber-coated ball and rollers.
2) Check the connecter or the cables of the mouse and the
receiver if there is any break or tangled.
3) If the mouse is wireless, please check the distance between
the mouse and the receiver.
Question 5:
Displayed error number -115 on screen when install mouse
driver software.
Solution:
The error usually occurs because a virus-checking program is
Navigator Mouse
being used on the System to prevent files from being renamed.
Please shutdown any virus checking software running on the
system and then run the setup again.
Question 6:
Detection problems of the mouse.
Solution:
If your mouse is connected to the mouse port and is not
detected by the system, attempt the following step(s):
1) Please check the mouse port setting from the computer.
2) If you have a mouse with a mouse port adapter, please
connect the mouse to the computer through the mouse port
adapter. Restart the computer and check if the mouse is
detected properly.
3) If the mouse port adapter is not included in your package,
your mouse was designed to work on only one type of ports
(PS/2 or USB). Please check the mouse port setting from
the computer.
4) If the problem persists, please check for a possible
computer BIOS ROM upgrade from your computer
manufacturer.
5) Some notebook systems, such as IBM Thinkpad, have both
an external Mouse Port and an integrated Pointing Stick,
which is connected to the Mouse Port. If your mouse is
having difficulty running on the Mouse Port of this type of
system, please other ports.
Question 7:
Conflicts with other Devices.
Solution:
Some softwares, provided by other manufacturers, include
mouse functions, which may conflict with the A-Button mouse.
We recommend you to remove the software installed
previously and then install the Navigator mouse software.
Navigator Mouse
Question 8:
Too much interference to wireless mice.
Solution:
1) Change the location of the receiver.
2) Please remain a certain distance from other high-voltage or
wireless devices.
Question 9:
Problems of operating the wheel.
Solution:
1) Verify that the "Browser Mouse" or "Mouse Control Panel"
application is installed properly. If you do not find the
"Browser Mouse" or "Mouse Control Panel" icon in the
system tray, you need to reinstall mouse software.
2) Please install the mouse driver while the OS is under
Windows 98.
3) Some other applications with mouse scrolling function may
conflict with this mouse function. Remove these
applications before install the Navigator mouse software.
Question 10:
You do not click the "Navigator" hot key, but the selection
menu appears. Besides, there is no any reaction from the
right button.
Solution:
The situation can be eliminated by repeatedly clicking the
"Navigator" hot key.
Question 11:
When you install the mouse driver, you are required to assign
a path for the file "mouse.drv".
Solution:
Please assign the file path to the folder "System" of "Windows".
Navigator Mouse
Wireless Mouse Patents
- Wireless Mouse and Stand Body: Taiwan 078386, China
01360042.7, Germany 401 06 575.8, and USA Pending
- Improved Structure of Wireless Mouse System: Taiwan
89222812, China 01100419.3, Germany 201 12 178.6 and
USA Pending
- Wireless Mouse Recharge System: Taiwan 90104125, China
01109443.5, Germany 20112177.8, USA Pending
- Multiple Recharge System: Taiwan 90115187, China
01120050.2, Germany 20201110.0, USA Pending
10
PMU-MOP00006

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 12
Create Date                     : 2004:03:16 16:21:36
Modify Date                     : 2004:03:16 16:21:36
Producer                        : Corel PDF Engine Version 9.397
Author                          : Amanda_Kuo
Creator                         : CorelDRAW Version 9.397
Title                           : PMU-MOP00006.cdr
Keywords                        : Navigator Mouse ¤¤©Ê / C218, C220_v2

EXIF Metadata provided by EXIF.tools