Chicony Electronics Co DCD210C200 WIRELESS CAMCORDER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1950060
Application ID	lPRgCwnqf4EHxKuDdnd/8A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	168.8kB (2109979 bits)
Date Submitted	2013-04-24 00:00:00
Date Available	2013-10-21 00:00:00
Creation Date	2017-10-27 17:37:42
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-27 17:37:42
Document Title	User Manual
Document Creator	Adobe InDesign CS6 (Windows)

Wireless Camcorder
User Manual
Names of Parts
Photo button
Wide/Tele lever
Light
External lens
ilter mount
Lens
Indicator
Microphone
Speaker
Mini USB Port
LCD touch panel
Record button
Power button
HDMI port
Digital light button
Pause button
Battery / SD card cover
Tripod socket
English | 1
Getting Started
Charging the Unit
• Before initial use, fully charge the camera via power adapter or USB to
computer system.
• During charging, the indicator lashes. When the camera is fully
charged, the indicator turns off.
Shoot Video
• Press Record button to shoot videos and press it again to stop.
Take Photo
• Press Photo button halfway down to focus, and then press it all the way
down to take photos.
Before using wireless modes, install below applications:
• Mobile app: Download [Unieye] from Google Play or Apple Store.
• PC software: Install [Unieye] from camera (Windows). (page 6)
Modes Navigation
• Tap the LCD touch panel to
display the main menu.
[Direct Mode]
Connecting camera to
mobile or PC for remote
controlling, live viewing, album managing, and camera setup.
[Cloud Mode]
Connecting camera to cloud server via access point (AP) or mobile
hotspot for internet videos and live monitoring.
[Playback]
To view or delete the videos or photos.
[Setup]
To setup camera (refer to page 7).
English | 2
Direct Mode (Mobile)
Direct Mode (Local)
Mobile / PC
For initial use, install [Unieye] app on mobile.
Each camera has a unique Camera ID. (
C2-xxxxxxxx)
Password is not required for the initial use, however, it is advised to go to
[Setup] in [Unieye] to setup password after connection is completed.
Connect to Camera
For iOS user:
• Set camera to Direct Mode
• On mobile, go to [Settings]
[Wi-Fi] Select camera.
3G connection will switch to
WiFi within 1 min.
• Run [Unieye].
• Press camera bar to start.
For Android user:
• Set camera to Direct Mode
is lit.
wait until the
• Activate WiFi on mobile.
• Run [Unieye].
• Press camera bar to start.
and
iOS:
Android:
Zoom In
Zoom Out
Take Photo
Shoot Video
Invert Image
Two Way Voice
• Press to turn on mobile mic. and speak to
camera.
• Camera mic. is muted while speaking.
Note: Move the camera further away from mobile when echo occurs.
Keeping the LCD display on preview in order to use live streaming on mobile.
English | 3
Cloud Mode (Mobile)
Cloud Mode (Internet)
AP
USTREAM
Cloud AP
Cloud Server
3G/4G
Mobile / PC
AP
Mobile Hotspot
Recommended Cloud Server for Access:
USTREAM
A live broadcasting social media.
Before using Cloud Mode, setting up cloud AP and cloud server on camera
are required.
Step 1: Setup Cloud AP in Direct Mode
On mobile, got to app [Setup] [Cloud Settings] [Cloud AP].
Select a WiFi network from [AP list] and enter password. If no preferred
AP is found, press [Other] from [AP list] Enter network SSID and
password.
Note: Mobile hotspot can be set as Cloud AP.
Step 2: Setup Cloud Server in Direct Mode
• New user, press
then enter email/username/password for autoregistration. Returning user, enter email/username/password only.
• Select cloud server for camera to access.
• Press [Save to Camera].
English | 4
Cloud Mode (Mobile)
Step 3: Connect Camera to Cloud Server
Options to connect to cloud server:
1. On mobile, press [Camera to Cloud] in [Setup] page.
2. On camera, set to [Cloud Mode]
If connection fails, one of the following situations will be shown.
Situation
Cause/Solution
Cannot connect to cloud AP or invalid SSID
password. Camera not inside WiFi area or weak
signal. Check AP settings or move camera closer to
cloud AP.
No internet or the cloud server is not accessible.
Cannot log in cloud server via internet.
Cloud service may be blocked by irewall.
Cloud server username or password incorrect.
in [Setup] for instructions.
Refer to
Username already taken. Create new account in
[Unieye].
Step 4: View Live Video on Cloud Server
Options to view live videos:
1. Use mobile app: USTREAM is available in Google Play or Apple Store.
2. Visit website: http://www.ustream.tv
Then search for username and select "username's show" to watch live video
through camera.
Note: 1. Cloud service may change depending on their policy.
2. In some areas, mobile may not activate hotspot where there is no 3G/4G.
3. Experiencing delays while viewing live video may be due to high internet trafic.
English | 5
PC Application
To use [Unieye] on PC, install [Unieye] PC software irst.
The [Unieye] PC version has similar features and interface to the [Unieye]
mobile version for easy user experience.
Install [Unieye] PC Software from Camera
• Connect the camera to PC via a USB cable.
• [Unieye] AutoRun/AutoPlay activates.
• If AutoRun/AutoPlay is not starting:
Go to [My computer] search [Unieye] for installation.
• Once installed, unplug the camera from PC then run the
[Unieye] PC software.
[Unieye] PC Software Features
• Press [View HD] or double-click the viewing window to
maximize it into full screen. Double-click again to return to
[Unieye] interface.
• To save videos or photos to PC:
Go to [Album] Select videos or photos Press [Save to PC].
English | 6
Setup List in Camera
Resolution
FHD
1920x1080p (30fps)
HD60
1280x720p (60fps)
HD30
1280x720p (30fps)
Stabilization
Stabilize the motion video.
Light
Turn on/off the LED light.
Night Mode
Set for night scenes.
Slow Motion
Record video in slow motion; resolution 720p.
Time Lapse
Record one frame per second; 30 frames per
second in playback.
Self-Timer
Activate 10-second self-timer.
Sound
Operation sound on/off.
TV Format
NTSC (60Hz)
For NTSC TV standard.
PAL (50Hz)
For PAL TV standard.
Format SD Card Format memory card.
Default Settings Restore camera to factory default.
Language
English, Spanish, French, German, Portuguese,
Italian, Simpliied Chinese, Traditional Chinese,
Japanese, Korean.
English | 7
Troubleshooting
Situation
Camera cannot turn on
Cause/Solution
Battery power is low. Recharge the battery.
Camera cannot turn on after Use the power adapter provided.
plugging power adapter
Connect it to power outlet correctly.
Camera is frozen
Remove the battery / unplug the adaptor,
then insert battery and turn on again.
Camera cannot record
No SD card or SD card is full.
SD card cannot be recognized. Format SD
card by camera or change SD card.
Camera not found
Turn on camera to main menu and activate
Direct Mode. Press "Refresh" on mobile or
PC to scan again.
Forgot camera password
Select default setting to reset.
Cannot watch live view
Move camera closer to mobile.
Flickering segments on live view TV system setting (50Hz/60Hz) is incorrect.
English | 8
FCC & Safety Instruction
FCC Regulations:
15.19(a)(3):
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
15.105(b):
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
— Consult the dealer or an experienced radio/ TV technician for help
Changes or modiications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.
English | 9
FCC & Safety Instruction
RF Exposure Information (SAR):
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Speciic
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for
SAR are conducted using standard operating positions accepted by the FCC
with the EUT transmitting at the speciied power level in different channels.
The highest SAR value for the device as reported to the FCC is 0.34 W/kg
when placed next to the body.
The FCC has granted an Equipment Authorization for this device with all reported
SAR levels evaluated as in compliance with the FCC RF exposure guidelines.
SAR information on this device is on ile with the FCC and can be found under
the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID:
E8HDCD210C200.
This device is compliance with SAR for general population/uncontrolled
exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance
with the measurement methods and procedures speciied in OET Bulletin 65
Supplement C.
Safety Instruction:
Do not drop, puncture or disassemble the device.
Use the device with good care. Rough handling may damage the internal
components.
Do not expose the device to high temperature. Avoid contact with water.
Please notice that the body of this device may become warmer after operating over a
period of time.
Use accessories supplied by the manufacturer only.
English | 10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Create Date                     : 2013:04:15 10:07:58+08:00
Metadata Date                   : 2013:04:23 17:28:03+08:00
Modify Date                     : 2013:04:23 17:28:03+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:b667c685-74c6-4030-8736-c0c8913aeb21
Original Document ID            : xmp.did:D8DC52EECF5AE21183C8CCFF3C34FA3A
Document ID                     : xmp.id:E58AD24571A5E211AD7FE1C823A0694D
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:E48AD24571A5E211AD7FE1C823A0694D
Derived From Document ID        : xmp.did:56DE7ED26FA5E211AD7FE1C823A0694D
Derived From Original Document ID: xmp.did:D8DC52EECF5AE21183C8CCFF3C34FA3A
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2013:04:15 10:07:58+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 11
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools