Chicony Electronics Co DCD220C120 WIRELESS CAMCORDER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2020432
Application ID	v+teZXhkTE8oCY46mUbKCA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	170.02kB (2125234 bits)
Date Submitted	2013-07-19 00:00:00
Date Available	2014-01-15 00:00:00
Creation Date	2017-10-26 14:17:41
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-26 14:17:41
Document Title	User Manual
Document Creator	Adobe InDesign CS6 (Windows)

Wireless Camcorder
User Manual
Names of Parts
Wide/Tele Lever
Photo Button
External Lens/
Filter Mount
Lens
Microphone
Indicator
Light
LCD Touch
Panel
Speaker
Power Button
Pause Button
Tripod Socket
Indicator
Record Button
Mini USB Port
HDMI Port
Wireless On/Off
Button
Battery/SD Card Cover
English | 1
Getting Started
Charging the Unit
• Before initial use, fully charge the camera via power adapter or USB to
computer system.
• During charging, the indicator lashes. When the camera is fully
charged, the indicator turns off.
Shoot Video
Press Record button to shoot videos and press it again to stop.
Take Photo
Press Pho to button halfway down to focus, and then press it all the way
down to take photos.
Before using wireless modes, install below applications:
• Mobile app: Download [Unieye Cam] from Google Play or Apple Store.
• PC software: Install [PC APP] from camera (Windows)(page 6).
Modes Navigation
Tap the LCD touch panel to
display the main menu.
[Direct Mode]
Connecting camera to
mobile or PC for remote
controlling, live viewing, album managing, and camera setup.
[Cloud Mode]
Connecting camera to cloud server via access point (AP) or mobile
hotspot for internet videos and live monitoring.
[Playback]
To view or delete the videos or photos.
[Setup]
To setup camera (refer to page 7).
English | 2
Direct Mode (Local)
Mobile / PC
For initial use, install [Unieye Cam] app on mobile. Each camera has
C2-xxxxxxxx). Password is not required for
a unique Camera ID (
the initial use, however, it is advised to go to [Setup] in [Unieye Cam] to
setup password after the connection is established.
Connect to Camera
For iOS user:
• Set camera to Direct Mode
• On mobile, go to [Settings]
[Wi-Fi] Select camera.
3G connection will switch to
WiFi within 1 min.
• Run [Unieye Cam].
• Press camera bar to start.
For Android user:
• Set camera to Direct Mode
and wait until the
is lit.
• Activate WiFi on mobile.
• Run [Unieye Cam].
• Press camera bar to start.
iOS:
Android:
Zoom In
Zoom Out
Take Photo
Shoot Video
Invert Image
• Tap to talk to the camera from mobile; tap again
Two Way Voice
to allow the camera to talk back to mobile.
Note:1. Move the camera further away from mobile when echo occurs.
2. Mobiles with poor CPU performance may affect audio during broadcasting.
English | 3
Cloud Mode (Internet)
AP
USTREAM
Cloud AP
Cloud Server
3G/4G
Mobile / PC
AP
Mobile Hotspot
Recommended Cloud Server for Access:
USTREAM A live broadcasting social media.
Before using Cloud Mode, setting up cloud AP and cloud server on
camera are required.
Step 1: Setup Cloud AP in Direct Mode
[Cloud Settings]
[Cloud AP].
On mobile, go to app [Setup]
Select a WiFi network from [AP List]; enter network password when
prompted.
Enter
If no preferred AP is found, press [Other...] from [AP List]
network name and password.
Note: Mobile hotspot can be set as Cloud AP.
Step 2: Setup Cloud Server in Direct Mode
then enter email/username/password/conirm
• New user, press
for auto-registration. Returning user, enter username/password only.
• Press [Save to Camera].
English | 4
Cloud Mode (Internet)
Step 3: Connect Camera to Cloud Server
Options to connect to cloud server:
1. On mobile, press [Camera to Cloud] in [Setup] page.
2. On camera, set to Cloud Mode
If connection fails, one of the following situations will be shown.
Situation
Cause/Solution
Cannot connect to cloud AP or invalid network
password. Camera not inside WiFi area or weak
signal. Check AP settings or move camera closer
to cloud AP.
No internet or the cloud server is not accessible.
Cannot log in cloud server via internet.
Cloud service may be blocked by irewall.
Cloud server username or password incorrect.
in [Setup] for instructions.
Refer to
Username already taken. Create new account in
[Unieye Cam].
Step 4: View Live Video on Cloud Server
Options to view live videos:
1. Use mobile app: USTREAM is available in Google Play or Apple Store.
2. Visit website: http://www.ustream.tv
Then search for username and select "username's show" to watch live
video through camera.
Note:
1. Cloud service may change depending on their policy.
2. In some areas, mobile may not activate hotspot where there is no 3G/4G.
3. Experiencing delays while viewing live video may be due to high internet trafic.
English | 5
PC Applications
To use [Unieye Cam] features on PC, install [PC APP] irst. The [PC
APP] has similar features and interface to [Unieye Cam] for easy user
experience.
Install [PC APP] from Camera
• Connect the camera to PC via a USB cable.
• [PC APP] AutoRun/AutoPlay activates.
• If AutoRun/AutoPlay is not starting:
Go to [My computer] and search [PC APP] for installation.
• Once installed, unplug the camera from PC then run [PC APP].
[PC APP] Features
• Press [View HD] or double-click the viewing window to maximize it
into full screen. Double-click again to return to the [PC APP] interface.
• To save videos or photos to PC:
Select videos or photos
Press [Save to PC].
Go to [Album]
English | 6
Setup List in Camera
Resolution
FHD
1920x1080p (30fps)
HD60
1280x720p (60fps)
HD30
1280x720p (30fps)
Light
Turn on/off the LED light.
Night Mode
Set for night scenes.
Slow Motion
Record video in slow motion; resolution 720p.
Time Lapse
Record one frame per second; 30 frames per
second in playback.
Self-Timer
Activate 10-second self-timer.
Sound
Operation sound on/off.
TV Format
NTSC (60Hz)
For NTSC TV standard.
PAL (50Hz)
For PAL TV standard.
Format SD Card Format memory card.
Default Settings Restore camera to factory default.
Language
English, Spanish, French, German, Portuguese,
Italian, Simpliied Chinese, Traditional Chinese,
Japanese, Korean.
English | 7
Troubleshooting
Situation
Camera cannot turn on
Cause/Solution
Battery power is low. Recharge the battery.
Camera cannot turn on after Use the power adapter provided.
plugging power adapter
Connect it to power outlet correctly.
Camera is frozen
Remove the battery / unplug the adaptor,
then insert battery and turn on again.
Camera cannot record
No SD card or SD card is full.
SD card cannot be recognized. Format SD
card by camera or change SD card.
Camera not found
Turn on camera to main menu and activate
Direct Mode. Press "Refresh" on mobile or
PC to scan again.
Forgot camera password
Select default setting to reset.
Cannot watch live view
Move camera closer to mobile.
Flickering segments on live view TV system setting (50Hz/60Hz) is incorrect.
English | 8
FCC & Safety Instruction
FCC Regulations:
15.19(a)(3):
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
15.105(b):
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
— Consult the dealer or an experienced radio/ TV technician for help
Changes or modiications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.
English | 9
FCC & Safety Instruction
RF Exposure Information (SAR):
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Speciic
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for
SAR are conducted using standard operating positions accepted by the FCC
with the EUT transmitting at the speciied power level in different channels.
The highest SAR value for the device as reported to the FCC is 0.42 W/kg
when placed next to the body.
The FCC has granted an Equipment Authorization for this device with all reported
SAR levels evaluated as in compliance with the FCC RF exposure guidelines.
SAR information on this device is on ile with the FCC and can be found under
the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC
ID:E8HDCD220C120.
This device is compliance with SAR for general population/uncontrolled
exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance
with the measurement methods and procedures speciied in OET Bulletin 65
Supplement C.
Safety Instruction:
Do not drop, puncture or disassemble the device.
Use the device with good care. Rough handling may damage the internal
components.
Do not expose the device to high temperature. Avoid contact with water.
Please notice that the body of this device may become warmer after operating over a
period of time.
Use accessories supplied by the manufacturer only.
English | 10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2013:07:02 09:13:34+08:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2013:07:02 17:11:47+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2013:07:02 17:11:47+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:a8c589c5-366a-4b7d-9e7e-11db5d66a6dc
Original Document ID            : xmp.did:D8DC52EECF5AE21183C8CCFF3C34FA3A
Document ID                     : xmp.id:478AC590B4E2E211AE80B53B5077E47B
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:468AC590B4E2E211AE80B53B5077E47B
Derived From Document ID        : xmp.did:468AC590B4E2E211AE80B53B5077E47B
Derived From Original Document ID: xmp.did:D8DC52EECF5AE21183C8CCFF3C34FA3A
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2013:07:02 09:13:34+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 11

EXIF Metadata provided by EXIF.tools