Chicony Electronics Co DCE320H30 WiFi Home Monitor User Manual

Chicony Electronics Co Ltd WiFi Home Monitor

User Manual

WiFi Home CameraUser Manual
| 1EnglishNames of PartsLensLEDIndicatorMicro USB PortMode ButtonSpeakerReset ButtonmicroSD Card SlotStand
2 | English1. Insert a microSD Card (suggested class 10, up to 64GB).For initial use, mobile device needs to: 1. Connects to internet (via WiFi, 3G/4G). 2. Download and install App [Unieye Home] from Google Play Store or Apple App Store. Getting Started2. Power on: Plug a USB power cable into one of • PC USB port • USB output adapterUnieye HomeMobile device connects to smart WiFi Home Camera directly via App [Unieye Home] for remote control, live view, Widget display and receives push alerts when events are detected. Modes Switch in CameraLed indicator shows network connection status. Press to switch. • Steady purple for direct control • Steady blue for Internet controlCamera needs to: Led Indicator
| 3EnglishWireless & App OperationRun App [Unieye Home] on mobile device and navigate either one of modes:(I) Internet Mode - Internet (II) Local Mode - Direct controlUnieye HomeInternet Mode Local Mode【Local Mode】(I) 【Internet Mode】(II) MobileLocalCameraStatus: PurpleStatus: BlueUnieye ServerAP3G/4G Mobile HotspotWireless RouterAPCamera 3G/4G Mobile Wireless RouterAPMobileInternetMobile device directly connects to camera via WiFi for remote control, live view, pan angel change, camera setup and receives push alerts when noise and motion events are detected. Mobile device connects to camera via internet for remote control, live view, pan angel change, camera setup, push notication, Widget display and the instant live view from partner's camera.
4 | EnglishMobile Device Connects to Camera1. For Android: Turn on [Wi-Fi]. For iOS: Go to [Settings] [Wi-Fi]. Turn on [Wi-Fi] and select the camera name.2. Run [Unieye Home].3. Tap【Local】and select the camera to enter View Page. Tap [ ] to scan again if camera is not found.Note: For rst use, password setting is required.iOS SettingsH3-00000001Before using 【Internet Mode】 on mobile App, ensure WiFi on mobile device is on and network indicator on camera shows steady purple. Remote Control PageInternet Mode Main Page【Internet Mode】1. Run [Unieye Home] and tap .2. Tap Add Camera in list. Enter camera ID and password. Add CameraBefore adding a congured camera or using another mobile, ensure the camera is in 【Internet Mode】 and status indicator shows steady green.
| 5EnglishRemote Control: Advance Setup:Items Descriptions Talk to camera from mobile. Mute the sound from camera. Shoot videos or take photos and save to storage on mobile "Album\Unieye Home\“Items Descriptions Items Descriptions Rescan for cameras Delete camera Switch to local mode Tip for help Add camera About1. Go to [ Setup] [ Internet Settings] Edit Email and AP2. Tap [Save] to complete Email & AP settings.Camera Internet Setup Before using internet cloud service, Email and AP must be properly set up. Note: AP(Access Point) can be • Wireless Router or • 3G/4G Mobile Wireless Router or • 3G/4G Mobile HotspotAPAPAPAPAPAPAPAPAPWireless Router 3G/4G Mobile Wireless Router3G/4G Mobile Hotspot
6 | EnglishCloud Video Recording Widget displays on mobile desktop Cloud Video Recording (CVR) saves videos and images in your cloud account. For initial use, cloud account should be authenticated. Widget is a small tool for Android devices that real tim shows alert inforamtion on Mobile desktop.1. Go to [Setup] Turn on [Save to CVR] 2. Select a cloud account and enter account information.3. Tap Save on [Setup] page to activate CVR function.1. Add an Unieye Home Widget.2. On widget setting page, select a camera and adjust photo fetch interval. 3. Tap [Conrm] to create the Widget on mobile desktop.Photos on widget update regularly or when events detected.Push AlertWhen camera is in【Internet Mode】and events are detected, Push alerts and Email will be sent to mobile device.
| 7EnglishNote: Record event clips only when mobile device did not connect to camera.Groups Descriptions Camera Settings Edit name, password. Format SD card. Adjust night vision, noise detection, motion detection, image rotation, etc. Internet Settings Edit Email and AP for【Internet Mode】. Events (for camera) In [Setup] Page, tap [Save] to complete settings to camera. Tap [ ] and select [Local Mode] to switch to Local Mode .Items DescriptionsCamera VideosView or delete recorded video les saved in camera SD card during motion and noise detection. Setup (for camera) 【Local Mode】Local Mode Main Page Remote Control Page
8 | EnglishCondition Status Indicator Beep Power On Flash for few seconds, then turn to steady purple. 1 time【Local Mode】Steady purple (For 1st use, Indicator ashs for few seconds, then turn to steady purple) N/A【Internet Mode】Steady blue N/A Power Off No indication 1 time Low Battery Flash in red 2 times Fail connect to 【Internet Mode】Flash in blue for few seconds, then turn to purple N/A Factory Reset No change 3 timesCamera HotkeyForced Shutdown Press and hold for 5 seconds to turn off camera.Forced Factory Settings• Camera: Open the top cover. Insert a small thin paper clip into the hole and press lightly to reset. • Mobile: Go to App [Unieye Home] Connect【Local Mode】 [Setup] page Reset factory settings.Camera IndicationCamera Hotkey
| 9EnglishSituation Cause/SolutionCamera cannot turn on Unplug power adapter, then plug again to power on.Camera is frozen Unplug power adapter, then plug again to power on.Camera cannot record• No microSD card or microSD card is full • microSD card cannot be recognized • Format microSD card in [Unieye Home] or replace microSD cardCamera cannot connect to AP or could server • Invalid AP name or password • Weak WiFi signal or not in WiFi coverage • No internet or cloud server is not accessible • Blocked by rewallMobile cannot nd Camera • Camera not in WiFi coverage • Mobile WiFi is disabled • iOS user does not choose camera name in Wi-Fi Settings • Tap [ ] on [Unieye Home]Mobile cannot watch live view • Weak WiFi signal• Camera is occupied by other mobileMobile cannot connect to cloud server • Check mobile 3G/4G or WiFi internet connection • Blocked by rewallMobile cannot watch live view The internet bandwidth is insufcient for camera upload or mobile downloadFactory Reset Insert a small thin paper clip to press reset button lightly.Troubleshooting【Internet Mode】【Internet Mode】【Local Mode】【Local Mode】
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Navigation menu