Chicony Electronics Co KBR0180 Wireless Keyboard User Manual Manual

Chicony Electronics Co Ltd Wireless Keyboard Manual

Manual

A. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTThis equipment has been tested and found to comply with the limits for a Class B digital device,  Pursuant  to  Part  15  the  FCC  rules.  These  limits  are  designed  to  provide reasonable  protection  against  harmful  interference  in  a  residential  installation.  This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with  the instructions, may cause harmful interference to radio communications.  However,  there  is  no  guarantee  that  interference  will  not  occur  in  a particular installation. If this equipment does cause harmful interference will not occur in a particular  installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or television reception, which can be determined by turning the equipment off and on, the user  is  encouraged  to  try  to  correct  the  interference  by  one  or  more  of  the  following measures: •  Reorient or relocate the receiving antenna. •  Increase the separation between the equipment and receiver.   •  Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to  which  the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help. WARNING:A shielede-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used.Use only shielded cables to connect I/O devices to this equipment.You  are  cautioned  that  changes or  modifications  not  expressly  approved  by  the  party responsible for compliance could void your authority to operate the equipment.CAUTION: AVOID PROLONGED USE OF THE KEYBOARD WITHOUT BREAKS.Take regular breaks and  keep a good  posture.  Consult  your  physician  promptly  if you notice any lost of motion or pain in your wrist when using the keyboard. B. PRODUCT SPECIFICATION1. FREQUENCY BAND : Keyboard – 27.145    27.195  MHzMouse –  27.045    27.095  MHz2. CHANNEL : 2 channels for keyboard / 2 channels for mouse.3. FREQUENCY MODULATION : FSK MODE  4. POWER RATTING :   Keyboard : 3 V , 30 mA (MAX)Mouse : 3 V , 50 mA (MAX)Receiver : 5 V , 200 mA (MAX)5. BATTERY LIFE TIME :Keyboard : 600 HOURS REFERENCE (OPERATING MODE)Mouse : 300 HOURS REFERENCE (OPERATING MODE)6. OPERATING TEMPERATURE : 0º C~ 40º C.7. STORAGE TEMPERATURE : -10º C ~ 60º C.US USC. HARDWARE INSTALLATION  1. Turn off your computer 2.  Plug  the  receiver  connector  in  purple  into  keyboard  port  on  your  computer  and locate the other connector in green to mouse port3. Place the receiver horizontally and keep approx.  8 inches (or 20 centimeters) space from other electrical devices4. Load two AA batteries into battery chamber on the back of keyboard and two AAA battery to battery chamber of mouse 5. Turn on your computer D. SOFTWARE INSTALLATION1. Insert CD into your CD-ROM drive2. Multimedia Keyboard Driver Installation screen appears.  Click Windows OS of your computer.  Follow  the    instructions  on  the  screen  to  complete  the  software installation.E. USER CAN DO EITHER ONLY CHANNEL SETTING OR CHANNEL / ID SETTING WHEN INTERFERENCE OCCURSKEYBOARD & MOUSE CHANNEL SETTING:1. Push the connect button on the back of keyboard (mouse) changing the operating channel to the other one.2. Please push the connect button on the top of receiver.  The indicator on the top of  receiver  starts  blinking,then  repeat  step  1  within  30  seconds  if  keyboard (mouse) is not working properlyKEYBORAD & MOUSE CHANNEL / ID SETTING: 1. Remove the batteries from battery chamber on the back of keyboard (mouse).2. Push the connect button on the top of receiver. The indicator on the top of receiver starts blinking.3.  Push  the  connect  button  on  the  back  of  keyboard  (mouse),  and  hold  it  down batteries  into  load  the  y  chamber  then  release  the  connect  button  within  30 seconds.4.  Setting  is  complete.  The  indicator  on  receiver  will  turn  off  automatically.    The channel is then changed to the other channel and ID channged to a random ID.5. Please push the connect button on receiver , then push the connect button on the back of keyboard (mouse) within 30 seconds to recover if keyboard (mouse) is not working properly.?Note: To have maximum performance, avoid placing receiver, keyboard and mouse on metalic surface.Operating distance between keyboard, mouse and receiver will depend on the environment around.  User can try various locations for the receiver in order to find best operating performance.

Navigation menu