Chicony Electronics Co MG-0637T Wireless Mouse User Manual 0636 manual 1

Chicony Electronics Co Ltd Wireless Mouse 0636 manual 1

Manual

A. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTThis equipment has been tested and found to comply with the limits for  a  Class  B  digital  device, Pursuant to Part 15 the FCC rules. These  limits  are  designed  to  provide  reasonable  protection  against  harmful  interference in  a  residential  installation. This  equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If  this  equipment  does  cause  harmful  interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does  cause  harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.CAUTION: AVOID PROLONGED USE OF THE KEYBOARD WITHOUT BREAKS.Take regular breaks and keep a good posture. Consult your physician promptly if you notice any lost of motion or pain in your wrist when using the keyboard.INFORMATION FOR OPTICAL POINTING DEVICES ONLY:This product has been tested to comply with International Standard IEC 60825-1: (1993), incld. Amd. 2(2001). This product users LEDs that are inherently Class 1.IMPORTANT BATTERY INFORMATION• Keep batteries out of reach of children.• Insert the batteries in the proper direction as indicated by the positive (+) and negative (-) markings in the battery chamber.• Do not mix old and new batteries or batteries of different types (for example, carbon and alkaline batteries).• Always remove old, weak, or worn-out batteries propmptly and recycle or proper disposal of them in accordance with Local and National Disposal Regulations.• If a battery leaks, remove all batteries and recycle or dispose of them in accordance with the battery manufacture's instructions and Local and National Disposal Regulations. Before inserting new batteries, thoroughly clean the compartment with a damp paper towel, or follow the battery manufacture's recommendations for cleanup. If fluid from the battery comes into contact with skin or clothes, flush skin with water immediately.• Remove the batteries if your device is to be stored for an extended period of time without being used.PRODUCT DISPOSAL INFORMATIONDispose of this product in accordance with Local and National Disposal Regulations.B. PRODUCT SPECIFICATION1. Frequency Deviation: ± 320 KHz2. ModulationTypp:  GFSK Mode3. Transmitter Power: 0dBm Max4. Power requirement: 1.9V~3.6V5. Battery:     Keyboard : 2 pieces of AA Batteries Mouse : 2 pieces of AA Batteries 6. Battery life time :      Keyboard : 800 hours reference (operating mode)Mouse : 80 hours reference (operating mode)7. Operation distance :     Keyboard : 10 M without signal disturbance and no direction limit.Mouse: 10 M without signal disturbance and no direction limit.8. Mouse resolution : 1000 DPI9. Operating temperature : -10º C ~ +40º C10. Storage temperature : -40º C ~ +85º C.EnglishClass 1 LED ProductCAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the user's authority to operatethe equipment.
ContentsGetting  Started..................................................................................................................  1Features.............................................................................................................................  1Preparing Keyboard, Mouse and Receiver.......................................................................... 1Hardware Installation......................................................................................................... 1Connect the Dongle....................................................................................................... 1Remove battery tabs....................................................................................................... 1Remove battery tabs from mouse............................................................................... 1Remove battery tabs from keyboard........................................................................... 1Connection...................................................................................................................... 1Working with Keyboard and Mouse..................................................................................... 2Using  mouse  wheel.........................................................................................................  2Keyboard............................................................................................................................ 2Multimedia-keys ........................................................................................................... 2Special Features of Multimedia Keys ........................................................................... 3System Board  (motherboard) and BIOS ..................................................................... 3How to use the keyboard properly ....................................................................................... 3Cleaning the keyboard and the mouse.......................................................................... 3Troubleshooting and TipsEnglish................................................................................................... 3
Getting StartedThank you for choosing this 2.4G Wireless keyboard and Mouse Kits. It operates with digital radio technology to ensure no hinder communication between the keyboard, the mouse and your computer without connecting cable. The transmission and receiving of keyboard and mouse are free from angle restriction. Features• Complies with Directive 1995/5/EC of the European Parliament and Commission. • Complies with the mutual recognition of conformity 1999 for radio and telecommunications Equipment.• Manufactured with environmental friendly recycled materials.• Fully compliant with original USB version 1.0 and 1.1.Preparing Keyboard, mouse and receiverBefore working with your new keyboard and mouse, look at the "Hardware Installation" , and take a few one-time preparations.Hardware Installation• Do not move optical mouse on following surface -     Glass or any transparent materials Dark surface Mirror or reflecting surface Mouse pad with too many colors Rough surface.Step 1: Connect the dongle1. Plug the dongle connector into an USB port.2. SYSTEM will take around 10 sec to find your keyboard and mouse automatically.(PS : If your OS is Windows® 98, please follow the screen instruction to complete your keyboard and mouse installation)Step 2: Remove battery tabThe mouse requires two Alkaline AA batteries. (1) Pull out the battery tab from battery chamfer.(2) Power on the mouse.English - 1User's ManualWireless Keyboard + Mouse Kits1= Battery tab2= Power button           CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to instructions. Refer to "Important Battery Information" for disposal instructions.Step 3: Remove battery tabThe mouse requires two Alkaline AA batteries. (1) Pull out the keyboard tab from battery chamfer.1211= Battery tabNote: Please do not push the channel setting button (3) at one side of the battery compartment cover. It may cause the channel or ID change.  It is the same to mouse and keyboard.Step 4: ConnectionDongle LED will be blinking to show the connection successfully.
Working with keyboard and mouseThe following sections contain information on using the keyboard and the mouse.English - 2User's ManualWireless Keyboard + Mouse KitsUsing mouse wheelIn addition to two buttons, the mouse also has a wheel that can be used as follows:• As a 3rd button: press on the wheel.InternetWith this key you can start the standard browser for your system.• For scrolling, e.g. in documents or on Internet pages: turn the wheel forward or back.E-mailUse this key to start the standard e-mail program for your system.KeyboardSearchActivate the OS default search function.The keyboard has several additional function keys and a battery status indicator.Use this key to get help from HP.a. Multimedia-keysUse this key to eject CD tray 1.The following description of keys applies for the operating systems that support these functions (e.g. Windows ME, Windows 2000 and Windows XP).Play/PauseUse this key to start or pause for a short time the playback of a title just as you would do with a normal CD player.Previous TrackUse this key to skip to the forward title in the active player. Standby modeDepending on the settings in the BIOS Setup or operating system the computer switches to a standby mode (not under Windows NT).Next TrackUse this key to skip to the next title in the active player.HP ClubUse this key to enter HP Club center.Use this key to record the sound or movie. Increasing the volumeThis key increases the volume of the connected loudspeakers.Decreasing the volumeThis key decreases the volume of the connected loudspeakers.MuteUse this key to switch on/off the connected loudspeaker.Use this key to eject CD tray 1.StopUse this key to end the playback of a title.
b. Special features of multimedia keysThe proper function of the multimedia keys is dependent on your system.c. System board (motherboard) and BIOSEnglish - 3The "Standby mode" key only functions correctly when the system board, BIOS and operating system of your computer fully support the ACPI functionUser's ManualCleaning the keyboard and the mouseAdvice of using the keyboardWireless Keyboard + Mouse Kits• Use disinfectant wipes to clean the keyboard and the mouse. The keyboard is ergonomically designed to ensure ease-of-use.• Do not use any dissolvent, which may damage the surface of your keyboard and mouse.Inconvenient arrangement of the input and output devices, awkward arm movements or posture, or working with the keyboard or mouse for lengthy periods without a break can lead to tenseness, fatigue, and damage to the locomotors system (nerves, muscles, tendons, and joints).Troubleshooting and tipsYou can considerably reduce the risk of this happening if you follow the advice given below.The keyboard or mouse does not operate following installation or is not recognized.• Arrange your workplace in accordance with the recommendations for an ergonomic workstation provided in the PC Operating Manual.• Make sure that the batteries have been inserted correctly according to the polarity and the receiver is well connected. • Position the keyboard so that you can use it without any noticeable strain. The keyboard should be level with the upper part of you body. This prevents any tension in the shoulders and arms.• Check that your USB port is configured properly.• When typing, hold your hands and forearms so that they form as natural a line as possible. Do not turn your hands too far to the left or right.• Make the connection between the Dongle and the keyboard and mouse. Press a mouse button and then the connection button on the Dongle.• Keep your wrists straight while typing. Do not angle your hands upwards or downwards.• Make sure the batteries are not too weak.• Do not rest your hands on the balls of your thumbs while typing, and do not strike the keys too hard.• Remove the batteries from the device. Please press any button on the device several times to prevent any unexpected failure after batteries being put in.• Relax your hands by occasionally taking a break from typing. During these breaks you should rest your hands on the balls of your thumbs or place your arms on the armrests of your chair.• To determine whether the keyboard, mouse or computer causes the problem test the keyboard and mouse on a second computer if possible; or test another keyboard and mouse on your current computer.If you are still unable to solve the problem, please contact your point of sale or your dealer.If you need to exchange the keyboard, please note that you must return it to your dealer in its original packaging and also a produce proof of purchase (receipt). Keep your receipt in a safe place after purchase.

Navigation menu