Chicony Electronics Co MSR0195 Wireless Mouse User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	181904
Application ID	6qkJIFbq5DRs0mhk8/p3mg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	41.35kB (516827 bits)
Date Submitted	2001-12-01 00:00:00
Date Available	2001-12-01 00:00:00
Creation Date	2001-10-23 11:29:42
Producing Software	Adobe PDF Library 2.0
Document Lastmod	2001-11-23 11:35:53
Document Title	Manual

US
A. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, Pursuant to Part 15 the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING:
A shielede-type power cord is required in order to meet FCC emission limits and also to
prevent interference to the nearby radio and television reception. It is essential that only
the supplied power cord be used.
Use only shielded cables to connect I/O devices to this equipment.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
CAUTION: AVOID PROLONGED USE OF THE KEYBOARD WITHOUT BREAKS.
Take regular breaks and keep a good posture. Consult your physician promptly if you
notice any lost of motion or pain in your wrist when using the keyboard.
B. PRODUCT SPECIFICATION
1. FREQUENCY BAND :
Keyboard – 27.145 27.195 MHz
Mouse – 27.045 27.095 MHz
2. CHANNEL : 2 channels for keyboard / 2 channels for mouse.
3. FREQUENCY MODULATION : FSK MODE
4. POWER RATTING : Keyboard : 3 V , 30 mA (MAX)
Mouse : 3 V , 50 mA (MAX)
Receiver : 5 V , 200 mA (MAX)
5. BATTERY LIFE TIME :
Keyboard : 600 HOURS REFERENCE (OPERATING MODE)
Mouse : 300 HOURS REFERENCE (OPERATING MODE)
6. OPERATING TEMPERATURE : 0º C~ 40º C.
7. STORAGE TEMPERATURE : -10º C ~ 60º C.
US
C. HARDWARE INSTALLATION
1. Turn off your computer
2. Plug the receiver connector in purple into keyboard port on your computer and
locate the other connector in green to mouse port
3. Place the receiver horizontally and keep approx. 8 inches (or 20 centimeters) space
from other electrical devices
4. Load two AA batteries into battery chamber on the back of keyboard and two AAA
battery to battery chamber of mouse
5. Turn on your computer
D. SOFTWARE INSTALLATION
1. Insert CD into your CD-ROM drive
2. Multimedia Keyboard Driver Installation screen appears. Click Windows OS of your
computer. Follow the instructions on the screen to complete the software
installation.
E. USER CAN DO EITHER ONLY CHANNEL SETTING OR CHANNEL / ID SETTING
WHEN INTERFERENCE OCCURS
KEYBOARD & MOUSE CHANNEL SETTING:
1. Push the connect button on the back of keyboard (mouse) changing the
operating channel to the other one.
2. Please push the connect button on the top of receiver. The indicator on the top
of receiver starts blinking,then repeat step 1 within 30 seconds if keyboard
(mouse) is not working properly
KEYBORAD & MOUSE CHANNEL / ID SETTING:
1. Remove the batteries from battery chamber on the back of keyboard (mouse).
2. Push the connect button on the top of receiver. The indicator on the top of receiver
starts blinking.
3. Push the connect button on the back of keyboard (mouse), and hold it down
batteries into load the y chamber then release the connect button within 30
seconds.
4. Setting is complete. The indicator on receiver will turn off automatically. The
channel is then changed to the other channel and ID channged to a random ID.
5. Please push the connect button on receiver , then push the connect button on the
back of keyboard (mouse) within 30 seconds to recover if keyboard (mouse) is not
working properly.
? Note: To have maximum performance, avoid placing receiver,
keyboard and mouse on metalic surface.Operating distance between
keyboard, mouse and receiver will depend on the environment
around. User can try various locations for the receiver in order to
find best operating performance.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 2001:11:23 11:35:53
Producer                        : Adobe PDF Library 2.0
Create Date                     : 2001:10:23 11:29:42
Page Count                      : 1

EXIF Metadata provided by EXIF.tools