Chicony Electronics Co RFM9943 RF Mouse User Manual

Chicony Electronics Co Ltd RF Mouse

users manual

Wireless Kit QUICK REFERENCE GUIDEA. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTThis equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. WARNING:A shielede-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used.Use only shielded cables to connect I/O devices to this equipment.You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.CAUTION: AVOID PROLONGED USE OF THE KEYBOARD WITHOUT BREAKS.Take regular breaks and keep a good posture. Consult your physician promptly if you notice any lost of motion or pain in your wrist when using the keyboard. B. PRODUCT SPECIFICATION1. FREQUENCY BAND : Keyboard 26.960 26.975 26.990 27.005 27.020 27.035 29.050 27.065 MHzMouse 27.175 27.190 27.205 27.220 27.235 27.250 27.265 27.280 MHz2. CHANNEL : 8 channels for keyboard / 8 channels for mouse.3. FREQUENCY MODULATION : FSK MODE 4. POWER RATTING : Keyboard : 3 V , 30 mA (MAX)Mouse : 1.5 V , 50 mA (MAX)Receiver : 5 V , 200 mA (MAX)5. BATTERY LIFE TIME :Keyboard : 600 HOURS REFERENCE (OPERATING MODE)Mouse : 300 HOURS REFERENCE (OPERATING MODE)6. OPERATING TEMPERATURE : 0º C~ 40º C.7. STORAGE TEMPERATURE : -10º C ~ 60º C.C. HARDWARE INSTALLATION 1. Turn off your computer 2. Plug the receiver connector in purple into keyboard port on your computer and locate the other connector in green to mouse port3. Place the receiver horizontally and keep approx. 8 inches (or 20 centimeters) space from other electrical devices4. Load two AAA batteries into battery chamber on the back of keyboard and one AA battery to battery chamber of mouse 5. Turn on your computer D. SOFTWARE INSTALLATION1. Insert CD into your CD-ROM drive2. Multimedia Keyboard Driver Installation screen appears. Click Windows OS of your computer. Follow the instructions on the screen to complete the software installation.E. CHANNEL SETTING WHEN INTERFERENCE OCCURSKEYBOARD CHANNEL SETTING:1. Press the button above keyboard icon on receiver. The indicator above the button starts blinking. 2. Push the button on the back of keyboard. In one minute, press any of number from 1 to 8 on keyboard and press " Enter " key to confirm new channel setting. Default setting is channel 1. If you press number 3, the channel is setting to channel 3.3. The indicator on receiver will turn off automatically. 4. Setting is complete. Please repeat above setting if keyboard is not working properly.MOUSE CHANNEL SETTING:1. Press the button above mouse icon on receiver. The indicator above the button starts blinking. 2. Push the button on the back of mouse. In one minute, click 1 to 8 times of mouse RIGHT button then press mouse LEFT button to confirm new channel setting, i.e., click 6 times means setting at channel 6 (default setting is channel 1).3. The indicator on receiver will turn off automatically.4. Setting is complete. Please repeat above setting if mouse is not working properly252-09943-001

Navigation menu