Chief Manufacturing Cms390 Users Manual 391 INSTALLATION INSTRUCTIONS

CMS391 to the manual 247c00dd-1968-46d6-adb7-2ca4bfb5e574

: Chief-Manufacturing Chief-Manufacturing-Cms390-Users-Manual-531653 chief-manufacturing-cms390-users-manual-531653 chief-manufacturing pdf

Open the PDF directly: View PDF .
Page Count: 6

Download
Open PDF In Browser	View PDF

INSTALLATION INSTRUCTIONS
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação

Istruzioni di installazione
Installatie-instructies
Instructions d´installation

16"/24" Adjustable On-Center Ceiling Plate
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description

CMS390/CMS391

CMS390/CMS391

Installation Instructions

DISCLAIMER
Milestone AV Technologies, Inc., and its affiliated corporations
and subsidiaries, intend to make this manual accurate and
complete. However, Milestone makes no claim that the
information contained herein covers all details, conditions or
variations, nor does it provide for every possible contingency in
connection with the installation or use of this product. The
information contained in this document is subject to change
without notice or obligation of any kind. Milestone makes no
representation of warranty, expressed or implied, regarding the
information contained herein. Milestone assumes no
responsibility for accuracy, completeness or sufficiency of the
information contained in this document.

IMPORTANT WARNINGS AND
CAUTIONS!

WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.

WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.

WARNING: Exceeding the weight capacity can result in

WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.

serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to the CMS390/391 up to (and
including) the display/projector does not exceed 500 lbs
(226.80kg).

CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.

DIMENSIONS
224.147
8.825

95.250
3.750

1.1/2" - 11.5 NPT TREADS

66.675

2.625
119.063
2X 4.688
ADJUSTABLE BOTH DIRECTIONS

14.597
.575
2X

12.700
.500

2X

41.275
1.625

2X

22.225
.875

9.906
.390

190.500
7.500

10 - 24 UNC THREADS

371.475
14.625
406.400
16.000

81.332
3.202
9.906
.390
49.181
1.936

2X

79.742
3.139
448.295
17.649

2

CMS-390

Installation Instructions

CMS390/CMS391

DIMENSIONS...cont’d
325.747
12.825

1.1/2" - 11.5 NPT TREADS
66.675

2.625
220.663
2X 8.688
ADJUSTABLE BOTH DIRECTIONS

95.250
3.750
2X

41.275
1.625
2X

14.597
.575
4X

190.500
7.500
406.400
16.000
574.675
22.625
609.600
24.000

12.700
.500

22.225
.875

4X

9.906
.390

10 - 24 UNC THREAD
81.332
3.202

9.906
.390
49.181
1.936

2X

79.742
3.139

CMS-391

651.495
25.649

LEGEND
Tighten Fastener

Security Wrench

Apretar elemento de fijación

Llave de seguridad

Befestigungsteil festziehen

Sicherheitsschlüssel

Apertar fixador

Chave de segurança

Serrare il fissaggio

Chiave di sicurezza

Bevestiging vastdraaien

Veiligheidssleutel

Serrez les fixations

Clé de sécurité

Loosen Fastener

By Hand

Aflojar elemento de fijación

A mano

Befestigungsteil lösen

Von Hand

Desapertar fixador

Com a mão

Allentare il fissaggio

A mano

Bevestiging losdraaien

Met de hand

Desserrez les fixations

À la main

Phillips Screwdriver

Open-Ended Wrench

Destornillador Phillips

Llave de boca

Kreuzschlitzschraubendreher

Gabelschlüssel

Chave de fendas Phillips

Chave de bocas

Cacciavite a stella

Chiave a punte aperte

Kruiskopschroevendraaier

Steeksleutel

Tournevis à pointe cruciforme

Clé à fourche

3

Installation Instructions

CMS390/CMS391

TOOLS REQUIRED FOR INSTALLATION

#2

5/32"
Security
(Included)

1/4" (12.7mm)

1/8"

PARTS

A (1)
(CMA-391
shown)

B (2)
1/4-20 x 3-1/2"

C (2)
1/4"

E (1)
10-24 x 1/4"

D (1)

H (1)
5/32"
Security

F (2)
5/16-18 x 5/8"

G(1)
10-24 x 1/4"

4

Installation Instructions

CMS390/CMS391

INSTALLATION
NOTE: The CMS-390 and CMS-391 attach to a 1-1/2" NPT
threaded column in a finished ceiling with 16" on-center
(CMS-390) or 24" on-center (CMS-391) wood joists. In
addition, both the CMS-390 and CMS-391 can be
installed in line on a single joist.
1.

(G
6

(G) x 1(F

Remove end caps from ceiling plate (A). (See Figure 1)

(A)

Figure 3
End caps

Security
1.

Figure 1
2.

Drill two 1/8" pilot holes into wood joists.

3.

Install ceiling plate (A) to ceiling using two 1/4-20 x 3-1/2"
lag bolts (B) and two 1/4" flat washers (C). (See Figure 2)

4.

Re-install end caps onto ceiling plate (A). (See Figure 2)

For increased security, remove two set screws from ceiling
plate and replace with two 5/16-18 x 5/8" security set
screws (F). Tighten with 5/32" security hex wrench (H).
(See Figure 4)

(F) x 2(F

1

2

(E) x 1

(A)

(A)

4

Adjustment
Set Screws
(D) x 1

4

(C) x 2

Figure 4
2.

3

((B) x 2

For additional security, remove Phillips screw in threaded
collar of ceiling plate and replace with one 10-24 x 1/4"
button head security cap screw (E) through security spinner
(D). Tighten with 5/32" security hex wrench (H).
(See Figure 4)

Adjustment
Figure 2
5.

Install 1-1/2" NPT threaded column (not included) into
threaded collar on ceiling plate (A).

6.

Install one 10-24 x 1/4" Phillips head screw (G) into
threaded collar and tighten. (See Figure 3)

To adjust position of ceiling plate, loosen adjustment set
screws, adjust plate to position, and tighten screws. (See
Figure 4)

5

CMS390/CMS391

Installation Instructions

USA/International

Europe

Asia Pacific
8803-000092
2008 Chief Manufacturing
www.chiefmfg.com
02/08

A
P
F
A
P
F
A

8401 Eagle Creek Parkway, Savage, MN 55378
800.582.6480 / 952.894.6280
877.894.6918 / 952.894.6918
Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands
+31 (0)40 2668620
+31 (0)40 2668615
Room 24F, Block D, Lily YinDu International Building
LuoGang, BuJi Town, Shenzhen, CHINA.

P +86-755-8996 9226
F +86-755-8996 9217



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c320 44.284297, Sun Apr 15 2007 17:19:00
Create Date                     : 2008:02:20 15:14:34-06:00
Modify Date                     : 2008:02:20 15:15:40-06:00
Metadata Date                   : 2008:02:20 15:15:40-06:00
Producer                        : PDF-XChange 3.50.0099 (Windows Server 2003 x64)
Keywords                        : 8803-000092, 2-08, CMS-390, CMS-391
Format                          : application/pdf
Title                           : CMS390-391 INSTALLATION INSTRUCTIONS
Creator                         : 
Subject                         : 8803-000092, 2-08, CMS-390, CMS-391
Document ID                     : uuid:f4e7183c-be44-4793-a89c-e7985ce03377
Instance ID                     : uuid:ca0595ef-fe6f-43b5-8ada-57b5385d4070
Page Count                      : 6
Warning                         : [Minor] Ignored duplicate Info dictionary

EXIF Metadata provided by EXIF.tools