China Great Wall Computer L2632XXXXA LCD Colour TV User Manual L32GAM4 L26GAM4 1120127

China Great-Wall Computer Shenzhen Co. Ltd. LCD Colour TV L32GAM4 L26GAM4 1120127

Contents

Users Manual I

MODEL: L26GAM4
L32GAM4
All the illustrations inside the manual and the product accessories provided are for reference only.
the package may vary. The company reserves the right to change the bundled accessories without prior notice.
The actual content of
1
Don't place the TV set on the unstable surface to prevent it from falling off .
sunlight
cables
and
should be avoided filled
such
when it is left unused for a long time.
shut down the TV temporarily.
unplug the power cable from wall outlet.
no signal input detected
no signal input detected
1.When using a PC as the signal source, please adjust the resolution of the graphic card to one of the following
recommended resolutions:
1.Any settings changed when the TV is in operation will be saved before the TV is shut down and be applied to next
operation.
Memorization of changed settings before TV shuts down
1.Please connect the TV's power cable to the a wall outlet with AC 100~240V only. Out of spec power supply may
overload the device and cause damage to it.
2.If the screen of the TV is not on after you have plugged the power cable to an electric outlet , press the power
button on the remote control or on the TV.
please do not place it in an airtight place and avoid covering
its vents to ensure good ventilation.
If your TV is broken or damaged, please contact your place of purchase or the local service center for help
instead of repairing it by yourself to prevent any personal danger.
unplug the power and antenna cables.
2
3
1
12
1
18
19
Supported operating modes 22
8
8
9
14
21
21
AC POWER
Blue Red
4
In operation
for
5
Y PbPr2
Y PbPr1
Y PbPr2
Y PbPr1
SOURCE
SLEEP Press to set a preset time interval for automatic shutdown.
Press to switch size (4:3, 16:9,)
AUTO Under VGA mode, the screen position could be auto
matically adjusted by pressing “Auto” button, when
the screen image is slanted.
MTS Press to select from SAP, Mono or Stereo mode.
NR Press to select noise reduction function
Return to previous channel
Press to display the information of current channel
number and time
Press to scroll through all available program
channels.
CH and CH
Press to adjust volume.
VOL and VOL
Press to show the on screen display menu.
V-CHIP Press to v-chip function
1
2
4
3
5
9
8
7
6
10
11 12
1413
17
15
19
16
18
6
channels
Do not mix old or us-
ed batteries with new ones.
dead
7
8
the end of antenna or cable TV network
quality of displayed pict-
dedicated
Coaxial cable. Otherwise,ther
re
should be plugged into the 75Ohm coaxial connector which
locates on the rear of TV set
In order to receive TV programs transmitted by satellite, a sate-
llite receiver should be connected to the rear of the lcd tv. Mean
while, in order to receive encoded signal, a decoder should be
connected to the rear of lcd tv.
Connect the coaxial(AV or Component) cable connectors to
TV
Satellite/Cable Receiver
for
a DVD player
Y PbPr1
Supported Y PbPr1
Y PbPr2
Y PbPr2
Y PbPr Y PbPr
Supported
9
10
Picture Mode Set
Brightness Set
Contrast Set
11
Saturation Set
Sharpness Set
Hue Set

Navigation menu