China T A Wow Stuff AR-1002 SHARK AND CLOWN FISH User Manual airswimmers IM
China Industries Ltd T/A Wow! Stuff SHARK AND CLOWN FISH airswimmers IM
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1487174 |
| Application ID | SmP5XNU/eloXHy/graa25w== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 54.64kB (683054 bits) |
| Date Submitted | 2011-06-21 00:00:00 |
| Date Available | 2011-06-21 00:00:00 |
| Creation Date | 2017-11-05 05:23:28 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-11-05 05:23:28 |
| Document Title | airswimmers_IM |
| Document Creator | Adobe Illustrator CS4 |
1. Contents 1 x Air Swimmers balloon (only 1 balloon included) 2. 2 x Underbelly fins 3. 1 x Back fin 4. 1 x Tail fin 2. 5. 1 x Pod track 6. 1 x Fin assembly 7. 4 x Fastening clips 8. 4 x Elastic bands 9. 4 x Hooks 10. 1 x Remote control (with putty) 11. 18 x Clear tape tabs 12. 12 x Double sided sticky pads 13. 1 x AAA battery 14. 1 x 9V battery 15. 1 x Extractor 16. 1 x Ribbon 1. Keep out of reach of children. Adult assembly only. Balloons represent a choking hazard. Keep uninflated balloons away from children. Discard broken balloons immediately. Children under 8 years can choke or suffocate. Warning! Never deliberately inhale balloon gas. Inhaling helium can result in serious lung injuries and/or suffocation. Do not inhale helium from a balloon or helium tank under any circumstances. Always use in a well-ventilated area. Never allow children to handle the cylinder or to use the balloon filling equipment. Adult supervision is required. Don’t play with the balloon near water. This product is strictly for use INDOORS ONLY. Do not use this product outside. Do not fly near air conditioning ducts. Small drafts or air flows may divert flying path. Do not expose the balloon to extreme heat as this may cause the balloon to burst. PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE. • Non-rechargeable batteries are not to be recharged; • Rechargeable batteries are only to be charged under adult supervision; • Rechargeable batteries are to be removed from the handset before being charged; • Different types of batteries or new and used batteries are not to be mixed; • Batteries are to be inserted with the correct polarity; • Exhausted batteries are to be removed from the toy; • The supply terminals are not to be short-circuited. Never : • Dispose of batteries in a fire. Always : • Make sure battery compartments are secure. • Use batteries of the correct size and type. • Fit batteries correctly observing the plus and minus marks on the battery and compartment. • Replace a whole set of batteries at one time. • Remove dead batteries from equipment. • Remove batteries from appliance that will not be used again for a long time. 6. The Air Swimmer needs to float neutrally at around 5 feet (1.5m) Place coins in the pod mouth Filling with helium You can fill your Air Swimmer at most party shops, flower shops and good retail stockists. Please make sure you tie the ribbon to your airswimmer if using this option. You can also buy your own helium tank that will allow you to fill your Air Swimmer at home. Valve To change the battery in the remote (10), unscrew the battery cover using a cross head screwdriver. Remove any used batteries and insert new ones ensuring the correct polarity is used. Screw the battery cover back into place. 1. To fill the Air Swimmer with helium lay the Air Swimmer balloon (1) out flat on the ground. Whilst one person holds the balloon down the other person can operate the helium tank. 2. Open up the valve on the back of the balloon and insert the helium tanks nozzle, release the helium slowly so that the balloon starts to inflate and increase it gradually until the balloon is full. The Air Swimmer needs to be filled by an adult. 11. 10. 12. 13. 14. USA, EU and international patents and designs pending. Adult supervision required! Instructions for assembly and flying Recycle www.wowstuff.co.uk 8+ 15. Additional items required: small cross head screwdriver coins (used as weights) 1. 16. Instructions for flying your Air Swimmer Troubleshooting guide Symptom Not suitable for children under 36 months due to small parts which may represent a choking hazard. Not suitable for children under 36 months; strangulation hazard. Please retain this packaging for future reference. Helium canister Inserting batteries into the Remote control 8. 7. Assembly All parts of the assembly of your Air Swimmer must be carried out by an adult. You will need at least two adults to complete these instructions. Before using helium tanks please consult any instruction manuals provided. IMPORTANT: PLEASE READ FULLY BEFORE ASSEMBLY Balloon 5. The crossed out wheelie-bin symbol indicates that the product & batteries must not be disposed of in domestic waste as they contain substances which can be damaging to the environment and human health. If you cannot re-use or recycle the product or batteries, please use designated collection points, or civic recycling facilities to dispose of them. BOX - CARD widely recycled feet 9. Consumers have a significant role to play in reducing the impact of waste electrical and electronic equipment on the environment, you can help by re-using or recycling such equipment. Designed and Developed by: William Mark Corporation, Claremont, California. Distributed by: China Industries Ltd. T/A Wow! Stuff, Creative Industries Centre, Wolverhampton Science Park, Wolverhampton, WV10 9TG, UK, www.wowstuff.co.uk Made in China 4. 3. The Air Swimmer needs to float roughly at around 5 feet (1.5m). Untie the ribbon tether and balance out the weight by placing coins in the pod mouth until the Air Swimmer rises very slowly. Then add enough of the putty from within the remote to the pod mouth so that the Air Swimmer neither rises nor falls. If it starts to descend, remove some of the putty. 3. To turn the Air Swimmer, hold the button down in the direction you want to turn for a longer period. 4. To make the Air Swimmer move upwards, the pod must move backwards on the track by pressing the back button so the nose points up. Then using the left/right button, swim the Air Swimmer forward. 5. To move the Air Swimmer downwards, move the pod forward using the forward button so the nose points down. Then using the left/right button, swim the Air Swimmer forward. Cause My Air Swimmer will not float. Not enough helium or too much putty/ coins in the pod mouth. My Air Swimmer is too light and sticks to the ceiling. The Air Swimmer is too light and needs to be weighted. Tail or pod does not operate. Weak batteries. The cable from the pod track is not connected to the tail sufficiently Solution Choose an environment which meets the following criteria: 1. An indoor environment with calm air conditions, avoid air-conditioned rooms. 2. There should be no electric fans, air conditioners, lamps , candles or open fires or other items that could effect flight or damage the Air Swimmer. 3. It is recommended to use a space larger than 10ft (3.4m) (W) x 16.5ft (5m) (L) x 8ft (2.4m) (H). 4. Always turn off both the pod and the handset when finished playing. Refill with helium, remove coins/ putty so Air Swimmer balances around 5 ft in height Try adding coins and putty into the pod track. 1. Turn the power switch to “ON” for both the remote (10) and the pod track (5). Remove and replace batteries in the handset and pod track 2. To move the Air Swimmers tail left, press left on the remote. To move the tail right, press right on the remote. To get the Air Swimmer moving, you need to move the tail from left to right by pressing right, left, right, left in a constant rhythm. Experiment with faster and slower rhythms to find the best speed. Refit and ensure the plug connection is fully inserted correctly 6. 5. 1. Once the Air Swimmer (1) is full, place the double sided sticky pads (12) onto a table with the yellow liner facing up. Remove the liner from the back, push each of the fins’(2)(3) attachment tabs down on a sticky pad and remove the entire pad, including the lining. 2. Whilst one person holds the Air Swimmer the other can remove the lining and stick the underbelly fins (2) to the area of the Air Swimmer marked “Place fin here” underneath, and stick the back fin (3) to the area marked “place fin here” on the top of the Air Swimmer, then put clear tape tabs (11A) over the fin tabs. 3. Stick the sticky pads onto the four hooks (9) using the same technique as in step one. Remove the lining and with the hooks facing towards the head of the Air Swimmer, stick them to the area marked “place hook here”. Place clear tape (11A) over the hook tabs. HELIUM After a few days you may find that the Air Swimmer may lose some of its buoyancy. This is not a fault of the Air Swimmer. Therefore you will need to top up the balloon on a regular basis. After several top ups of the Air Swimmer the helium inside the balloon may become mixed with oxygen and therefore if the balloon does not fly as well once full, it may be time to empty the balloon fully and then refill the balloon. Note: The Balloon will rise very rapidly once you start filling it with helium, you can tie the ribbon (16) provided to a tag on the packaging to stop it from floating away. You can store your Air Swimmer this way or by attaching to the hook on the controller. Warning: Do not inhale helium. Use only in a well ventilated area. Never use in closed spaces. Helium reduces and can eliminate oxygen available for breathing. Inhaling helium can result in serious personal injury or death. Warning: DO NOT OVER INFLATE THE BALLOON. Only inflate with helium. Do not use other type of gas. Do not use any other inflations device such as a foot pump. 2. 5. Attach the fin assembly to the 4 hooks on the Air Swimmer with elastic bands (8). The tail should line up vertically with the Air Swimmer and the plug connection on the fin assembly should face down. 4. Attach the tail fin (4) to the fin assembly (6) by slotting the rods into the fin assembly arms. The rods should line up with the groove in the arms and the ends should sit comfortably in the holes at the bottom of the fin assembly arms. Attach the fastening clips (7) to the top and bottom of the assembly arms securing the rods in place. 3. Clear tape (3) (2) 6. Using the double sided sticky pads (12), attach the pod track (5) to the underside of the Air Swimmer. Press the pod track onto the bottom of the Air Swimmer with the back of the pod at the place marked “2”. Make sure the pod track is as straight as possible, to ensure the pod runs smoothly. Place the clear tape (11B) over the top and bottom track tabs. Use (11C) for the middle track tab, placing one either side to secure. Loop the electrical cable from the pod track through the cable hoops, underneath the belly. Plug Connection Location Foam spacer plug connection Positioning the Pod Track Pod Track Looping the Electric Cable Back Sticky pads Front Connecting the Electric Cable Connection on fin assembly 7. Plug the electrical cable in to the plug connection on the fin assembly. Inserting batteries into the Pod Track Towards head Tail fin rods Cable runs from pod track to fin assembly When the batteries provided run out you will need to replace them with new ones. The pod track (5) takes one AAA battery (13) and the remote (10) takes one 9V battery (14). To change the battery in the pod track (5), unscrew the battery cover using a cross head screwdriver. Remove any used batteries and insert new ones ensuring the correct polarity is used. Screw the battery cover back into place. Fin assembly arms Fastening clips go here Fastening clips go here 4. CE REQUIREMENT Hereby, China Industries Ltd. t/a Wow! Stuff, declares that this AR-1001 & AR-1002 are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. To which must be added: - the exact location from which a copy of the DoC may be obtained (internet or postal address) or - a copy of the DoC in the original language is enclosed with the equipment FCC NOTE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Extract Create Date : 2011:06:16 09:02:29+01:00 Creator : Adobe Illustrator CS4 Modify Date : 2011:06:18 08:52:55+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : airswimmers_IM Metadata Date : 2011:06:18 08:52:55+08:00 Creator Tool : Adobe Illustrator CS4 Thumbnail Width : 256 Thumbnail Height : 80 Thumbnail Format : JPEG Thumbnail Image : (Binary data 8313 bytes, use -b option to extract) Instance ID : uuid:2cd58460-d805-4cea-8819-dcf15e57a92f Document ID : xmp.did:01801174072068118F62E79676D4FA5E Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:203457b3-229e-424c-bfe9-7af1c86ccfb6 Derived From Document ID : xmp.did:0180117407206811BF84FE42F6EB55FC Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : converted, saved, converted, converted, saved, saved, saved, saved, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, converted, saved, converted, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Params : from application/pdf toEXIF Metadata provided by EXIF.toolsHistory Instance ID : xmp.iid:D27F11740720681191099C3B601C4548, xmp.iid:F97F1174072068118D4ED246B3ADB1C6, xmp.iid:FA7F1174072068118D4ED246B3ADB1C6, xmp.iid:EF7F117407206811A46CA4519D24356B, xmp.iid:F07F117407206811A46CA4519D24356B, xmp.iid:F77F117407206811BDDDFD38D0CF24DD, xmp.iid:F97F117407206811BDDDFD38D0CF24DD, xmp.iid:FA7F117407206811BDDDFD38D0CF24DD, xmp.iid:FB7F117407206811BDDDFD38D0CF24DD, xmp.iid:FC7F117407206811BDDDFD38D0CF24DD, xmp.iid:FD7F117407206811BDDDFD38D0CF24DD, xmp.iid:FE7F117407206811BDDDFD38D0CF24DD, xmp.iid:B233668C16206811BDDDFD38D0CF24DD, xmp.iid:B333668C16206811BDDDFD38D0CF24DD, xmp.iid:B433668C16206811BDDDFD38D0CF24DD, xmp.iid:F77F11740720681197C1BF14D1759E83, xmp.iid:F87F11740720681197C1BF14D1759E83, xmp.iid:F97F11740720681197C1BF14D1759E83, xmp.iid:FA7F117407206811B628E3BF27C8C41B, xmp.iid:FF7F117407206811B628E3BF27C8C41B, xmp.iid:07C3BD25102DDD1181B594070CEB88D9, xmp.iid:F87F1174072068119098B097FDA39BEF, xmp.iid:F77F117407206811BB1DBF8F242B6F84, xmp.iid:F97F117407206811ACAFB8DA80854E76, xmp.iid:0180117407206811834383CD3A8D2303, xmp.iid:01E540664A3DDD11BD33D3EB8D3A1068, xmp.iid:6B6AE2A5723EDD11A6F1BABF7C5A7A51, xmp.iid:0B9FED35200A11689FE8CB9EA85C5459, xmp.iid:1DCF013E192068118F62E773E5E6F252, xmp.iid:FC7F1174072068119457DEEE52F2BB74, xmp.iid:FE7F1174072068119457DEEE52F2BB74, xmp.iid:0180117407206811BF84FE42F6EB55FC, xmp.iid:01801174072068118F62E79676D4FA5E History When : 2008:04:17 14:19:15+05:30, 2008:05:15 16:23:06-07:00, 2008:05:15 17:10:45-07:00, 2008:05:15 22:53:33-07:00, 2008:05:15 23:07:07-07:00, 2008:05:16 10:35:43-07:00, 2008:05:16 10:40:59-07:00, 2008:05:16 11:26:55-07:00, 2008:05:16 11:29:01-07:00, 2008:05:16 11:29:20-07:00, 2008:05:16 11:30:54-07:00, 2008:05:16 11:31:22-07:00, 2008:05:16 12:23:46-07:00, 2008:05:16 13:27:54-07:00, 2008:05:16 13:46:13-07:00, 2008:05:16 15:47:57-07:00, 2008:05:16 15:51:06-07:00, 2008:05:16 15:52:22-07:00, 2008:05:22 13:28:01-07:00, 2008:05:22 16:23:53-07:00, 2008:05:28 16:45:26-07:00, 2008:06:02 13:25:25-07:00, 2008:06:09 14:58:36-07:00, 2008:06:11 14:31:27-07:00, 2008:06:11 22:37:35-07:00, 2008:06:18 22:24:01+07:00, 2008:06:19 20:30:34-07:00, 2008:06:26 06:07:42-07:00, 2011:05:18 11:31:52+01:00, 2011:06:08 15:03:02+01:00, 2011:06:08 16:17:50+01:00, 2011:06:14 09:05:28+01:00, 2011:06:16 09:02:25+01:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4 History Changed : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, / Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 127.564444 Max Page Size H : 23.056233 Max Page Size Unit : Centimeters Font Name : Helvetica, MyriadPro-Regular, VAGRoundedStd-Bold, VAGRoundedStd-Light, Futura-Heavy Font Family : Helvetica, Myriad Pro, VAG Rounded Std, VAG Rounded Std, Futura Heavy Font Face : Regular, Regular, Bold, Light, Heavy Font Type : TrueType, Open Type, Open Type, Open Type, Unknown Font Version : 6.1d18e1, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, OTF 1.022;PS 001.001;Core 1.0.31;makeotf.lib1.4.1585, OTF 1.022;PS 001.001;Core 1.0.31;makeotf.lib1.4.1585, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671 Font Composite : False, False, False, False, False Font File Name : Helvetica.dfont, MyriadPro-Regular.otf, VAGRoundedStd Bold.otf, VAGRoundedStd Light.otf, MyriadPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 376 C, PANTONE 200 C Swatch Group Name : Default Swatch Group, Grays, Brights Swatch Group Type : 0, 1, 1 Swatch Colorant Swatch Name : White, Black, CMYK Red, CMYK Yellow, CMYK Green, CMYK Cyan, CMYK Blue, CMYK Magenta, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, PANTONE 200 C, PANTONE 376 C, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 14.999998, 0.000000, 0.000000, 0.000000, 0.000000, 5.000001, 19.999998, 50.000000, 75.000000, 85.000000, 90.000000, 75.000000, 80.000000, 70.000000, 85.000000, 100.000000, 100.000000, 75.000000, 50.000000, 35.000004, 10.000002, 0.000000, 25.000000, 39.999996, 50.000000, 55.000000, 25.000000, 30.000002, 35.000004, 39.999996, 39.999996, 50.000000, 0.000000, 50.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 85.000000, 100.000000, 60.000004 Swatch Colorant Magenta : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000000, 80.000000, 50.000000, 35.000004, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000002, 0.000000, 10.000002, 14.999998, 50.000000, 95.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 25.000000, 45.000000, 50.000000, 60.000004, 39.999996, 50.000000, 60.000004, 65.000000, 70.000000, 70.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000002, 10.000002, 90.000000, 90.000000 Swatch Colorant Yellow : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000000, 85.000000, 95.000000, 100.000000, 85.000000, 90.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 75.000000, 45.000000, 0.000000, 0.000000, 5.000001, 25.000000, 0.000000, 0.000000, 35.000004, 50.000000, 19.999998, 39.999996, 50.000000, 60.000004, 65.000000, 65.000000, 75.000000, 80.000000, 90.000000, 100.000000, 80.000000, 63.139999, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 95.000000, 100.000000, 0.000000, 0.003099 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 5.000001, 25.000000, 39.999996, 0.000000, 10.000002, 25.000000, 35.000004, 50.000000, 70.000000, 12.160000, 0.000000, 100.000000, 89.999405, 79.998795, 69.999702, 59.999104, 50.000000, 39.999401, 29.998802, 19.999701, 9.999103, 4.998803, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003099 Swatch Colorant Tint : 100.000000, 100.000000 Producer : Adobe PDF library 9.00 Page Count : 2