China T A Wow Stuff TX-1013H Stunt Buggy Extreme User Manual TX 1013 STUNT BUGGY XTREME IM
China Industries Ltd T/A Wow! Stuff Stunt Buggy Extreme TX 1013 STUNT BUGGY XTREME IM
Manual
Problem Cause Correction
Troubleshooting
Buggy doesn’t
move.
Power switch turned off.
Vehicle is too far away
from the controller.
The battery in the Buggy or
controller is flat.
Buggy does not
respond to the
controller.
Interference from other
RC devices.
Turn the power switch on.
Move the controller closer to the Buggy.
Change the batteries.
Remove or switch off
conflicting devices.
INSERTING THE BATTERIES
Handset
1. Use a cross head screwdriver to unscrew the cover on the back of the handset
2. Insert the battery (1x9V, not included) in accordance with the polarity
3. Replace the battery cover
4. Slide the switch to the ON position
Mega Stunt Buggy
1. Use a cross head screwdriver to unscrew the cover on the back of the buggy (see Fig. 1)
2. Clip out the cover completely to reveal the battery compartment (see Fig. 2)
3. Slide out the battery compartment and insert the batteries (6 x AA, not included) in
accordance with the polarity (see Fig. 3)
4. Slide the battery compartment back into place, replace the cover and secure
5. Slide the switch to the ON position
Manufacturer’s Name: China Industries Ltd. T/A Wow! Stuff
Manufacturer’s Address: Creative Industries Centre, Wolverhampton Science Park,
Wolverhampton, WV10 9TG, UK
Type of Equipment: Stunt Buggy Extreme
Model Number: TX-1013
Year of Manufacture: 2014
Application of Council Directive(s): 1999/5/EC The Radio Equipment and Telecommunications
Terminal Equipment Regulations 2000 (and its amending directives)
Standard(s) to which Conformity is Declared: EN62479, EN62115, EN301 489-1/3, EN300 220-1/-2
I hereby declare that the equipment named above has been tested and found to comply with the
relevant sections of the above referenced specifications. The unit complies with all essential requirements
of the Directives.
Place: Wolverhampton, UK Dr.Graeme Taylor
Date: April 2014 Director
DECLARATION OF CONFORMITY
Distributed by: China Industries Ltd. T/A Wow! Stuff,
Creative Industries Centre, Wolverhampton Science Park,
Wolverhampton, WV10 9TG.
www.wowstuff.com
!
Not suitable for children under 3 years old due to small parts which may represent a choking hazard.
Recommended for use by children over 5 years old. Do not operate during thunderstorms or rain. Do not submerge in water.
Keep fingers, hair and loose clothing away from the tyres, gears and motor. Please retain this information for future reference.
Adult supervision required. Operates on 27 MHz frequency. Made in China.
Battery Information
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before being charged.
• Different types of batteries or new and used batteries are not to be mixed.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
Always :
• Make sure battery compartments are secure.
• Use batteries of the correct size and type.
• Fit batteries correctly observing the plus and minus marks on the battery and compartment.
• Replace a whole set of batteries at one time.
• Remove dead batteries from equipment.
• Remove batteries from appliance that will not be used again for a long time.
• Please remember that AA batteries should be kept away from young children as they could be easily swallowed.
Seek medical advice if you believe a cell has been swallowed.
• Please ensure that batteries are installed by an adult prior to use.
Never
• Never dispose of batteries in a fire.
Consumers have a significant role to play in reducing the impact of waste electrical and electronic equipment on the environment,
you can help by re-using or recycling such equipment.
The crossed out wheelie-bin symbol indicates that the product & batteries must not be disposed of in domestic
waste as they contain substances which can be damaging to the environment and human health. If you cannot
re-use or recycle the product or batteries, please use designated collection points, or civic recycling facilities to
dispose of them.
Instructions The Gameplay
Designed by TX Juice in the UK, California and Asia.
Manufactured and assembled in China.
INSTRUCTION
MANUAL
1
2
3
Press both toggle sticks forward for full on 5 feet per second acceleration!
To make Stunt Buggy stand
upright pull both toggle sticks backwards
then instantly press both forwards!
For extreme 360 degree spins simply press one
of the toggle switches forwards
R/C
TM
0678
China Industries Ltd. T/A Wow! Stu
Property: TX Juice
Product: Stunt Buggy Xtreme
Product No: TX-1013
Date: 10/03/14
Printed: Black
+
ON OFF
5 FEET PER SECOND
ACCELERATION!
5 FEET PER SECOND
ACCELERATION!
WHEELIESWHEELIES
I
T
’
S
A
L
L
A
B
O
U
T
T
H
E
B
U
T
T
O
N
!
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.