ChipSiP Technology CWFB1XX-XXX 2.4G AP PCBA User Manual

ChipSiP Technology Co.,Ltd. 2.4G AP PCBA

user manual rev

Download: ChipSiP Technology CWFB1XX-XXX 2.4G AP PCBA User Manual
Mirror Download [FCC.gov]ChipSiP Technology CWFB1XX-XXX 2.4G AP PCBA User Manual
Document ID1786549
Application IDPmkcMX3l+T6hrU6JWnsdSQ==
Document Descriptionuser manual rev
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize5.27kB (65897 bits)
Date Submitted2012-09-10 00:00:00
Date Available2012-09-10 00:00:00
Creation Date2012-09-07 11:09:35
Producing SoftwareAcrobat Distiller 9.5.2 (Windows)
Document Lastmod2012-09-07 11:09:35
Document TitleMicrosoft Word - user manual
Document CreatorPScript5.dll Version 5.2.2
Document Author: 10003808

CWFB1XX-XXX
Specification
Revision 01
2012/06/06
Prepared By: Jeff Hsieh
Revision History
Revision
01
Date
2012/06/06
Notes
Owner
Initial Release
Jeff Hsieh
1. Wireless Spec.
WLAN: 1X1
Frequency Range:
Channel number:
Transmit Power:
Modulation Technology
Modulation type:
Transition Rate:
802.11b/g/n HT20: 2412 – 2462MHz
802.11n HT40: 2422 – 2452MHz
802.11b/g/n HT20: 11 channels
802.11n HT40: 7 channels
802.11b: 20.68dBm
802.11g: 23.14dBm
802.11n HT20 : 22.60dBm
802.11n HT40 : 22.61dBm
11b/g: DSSS, OFDM
11n: OFDM
CCK, DQPSK, DBPSK for DSSS
64QAM. 16QAM, QPSK, BPSK for OFDM
802.11 b: 1/2/5.5/11 Mbps
802.11 g: 6/9/12/18/24/36/48/54 Mbps
802.11 n HT20MHz: 6.5 – 65Mbps
802.11 n HT40MHz: 13.5 – 135Mbps
Federal Communications Commission (FCC) Statement
You are cautioned that changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may
cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
This Transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The following statement must be included with all versions of this document supplied to an OEM or
integrator, but should not be distributed to the end user. This device is intended for OEM integrators
only. Please see the full Grant of Equipment document for other restrictions. This device must be
operated and used with a locally approved access point.
End Product Labeling:
The final end product must be labeled in a visible area with the following:
“Contains FCC ID: O7N-CWFB1XX-XXX”.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 10003808
Create Date                     : 2012:09:07 11:09:35+08:00
Modify Date                     : 2012:09:07 11:09:35+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - user manual
Creator                         : 10003808
Producer                        : Acrobat Distiller 9.5.2 (Windows)
Document ID                     : uuid:92707570-b76d-4845-96cb-b644e9f0e132
Instance ID                     : uuid:47469a5a-b907-4807-84f1-6aa37e0ec373
Page Count                      : 4
EXIF Metadata provided by EXIF.tools
FCC ID Filing: O7N-CWFB1XX-XXX

Navigation menu