ChipSiP Technology CWFF202 USB dongle User Manual User s Manual CP831D 20130731

ChipSiP Technology Co.,Ltd. USB dongle User s Manual CP831D 20130731

User Manual

CWFF202 Series User’s Manual (Only for Internal Reference) Revision 01 2013/07/30 Prepared By: Alex Cheng
Revision History Revision Date Notes Owner 01 2013/ 07/ 30 Initial Release Alex Cheng
TABLE OF CONTENT 1. Install and start the application on your system …………………………………..4 2. Product specification ……………………………………………...………………6 3. FCC Statement ……………………………………………………………………9
1. Install and start the application on your system (1) Please install the product Driver. (2) After installed the Driver, you will see the REALTEK USB Wireless LAN Utility on you system. (3) Plug in the WiFi dongle on your system. (4) Double click it to execute “REALTEK USB Wireless LAN Utility” (5) Select an available Access Point ,and then connect it.
(6) Check the network quality
2. Product specification Chipsip Solution is a small-sized, 802.11abgn USB that achieves a data rate up to 300Mbps. It is 6 times faster than the legacy 11abg but is good performance. This product supports Client mode. It is ideal for multi-purpose installation in Windows and, Linux environment to share wireless connection. By supporting 64/128-bits WEP, TKIP, WPA, WPA2 and WPS, helps to protect your data and privacy during transmission. This module could be used for Desktop/NB and embedded platform that need 5GHz frequency band and could be mounted on system board like IPTV, STB, Media Player, Femto, XDSL, Cable Modem, Industrial PC, Ethernet Switch, Printer Connected TV, Smart Phone which have USB host device.  Realtek RTL8192DU chipset with USB 2.0 slave interface.  Date Rate up to 300Mbps  Security: 64/128-bits WEP, TKIP,WPA, WPA2, AES  Windows/Linux driver supported Description Features
Hardware Features: Standard IEEE 802.11 a/b/g/n Wireless LAN 2T2R mode ( 5GHz 1x1 and 2.4GHz 1x1 ) Antenna Print antenna on board ( 2 dBi ) Interface USB slave port Frequency Range 802.11a 5.180~5240 GHz(babd1)、5.745~5825 GHz(babd4) 802.11b/g 2.4~2.484GHz 802.11n 2.4~2.484GHz and 5.180~5240 GHz(babd1)、5.745~5825 GHz(babd4) Data Rate 802.11b: 1, 2, 5,5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps Receiver Sensitivity 11an/gn -66dBm at HT40 ( MCS7 ) 11an/gn -67dBm at HT20 ( MCS15 ) 11a/g -72dBm at 54Mpbs 11b -80dBm at 11Mpbs Software Supports Windows XP/ Vista/ Windows 7/ Linux driver Range Indoors: up to 50~100 meters indoor Power Requirement DC 5V/ 0.5A Max through USB voltage Operating Temperature 0 ~ 45℃ Dimension 75.5 x 26 x 9.6 mm Certifications FCC/CE by request Specification
Product Dimension and Drawing Product outline size: about 75.5 x 26.0 mm Mechanical Drawing: (unit: mm, tolerance: ±0.15mm )
3. FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device is going to be operated in 5.15~5.25GHz frequency range, it is restricted in indoor environment only.

Navigation menu