Christie Digital Systems Canada UHD751P TV set for digital signage with WiFi and bluetooth User Manual

Christie Digital Systems Canada, Inc. TV set for digital signage with WiFi and bluetooth

User manual

75” (190cm) UHD BIG SIZE MONITORENGLISHUSER MANUAL
 - 1 - ..................................2General V ..........................................................6 ...............................7....................................8Tff .....................................8 ......................................................9 T............................................10 .............................10 ........................... 11 ........................................ 11 ........................................12 ..........................................................17 ...................................................20.......................................21 .....................................21 ...........................................................21 ..............................................................21  ...........................22 T ...............................24 .................................... ...........................................System Features .............................................................................................. ............................................................Vesa all Mount Measurements .......................... An Indented all ..........................
English - 2 -• Please place the product in a position that electric cables cannot be affected by the operations on the product.• Follow all warnings and instructions marked on the product.• Follow the on screen instructions for operating the related features.• do not overuse the plugs and extension cords. Please do not open the lid of the monitor to service yourself. If the required service needs are not met       other risks may occur.• If you will not use the product for a long period of • Put the product on a well-ventilated place and • The product should be kept in 0 C° - 40 C°.      permanently.• Plug the appliance to a grounded outlet. Always use the grounded power cord supplied with your product. Manufacturer is not responsible for any damage caused unearthed usage.• The socket-outlet shall be installed near the equipment and shall be easily accessible.• Do not stay in contact with the parts of the product that become hot for long periods of time. Doing so may result in low-temperature burns.• The LCD panel used in this product is made of glass. or applied with impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks.• Usage of the monitor must not be accompanied               missile launch control in a weapon system.• Do not expose the product to direct sunlight or do of or near the product.• Do not place any heat sources such as electric •    product from the mains.• Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause Important Safety InformationCAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.Please read these instructions fully and carefully before use and keep for future referenceWARNING: This device is not intended for use by persons (including children) without physical, sensory or mental capabilities, or lack of experience and/or knowledge unless they have been given supervision or instruction concerning use of the device by a person responsible for their safety.• This product is for indoor use only.• Use this product at an altitude of less than 2000 meters above the sea level and in dry locations and in regions with moderate or tropical climates.• Please keep this manual for further use.• Unplug your product before starting to clean. Do not clean the product when it is on. Do not use liquid or aerosol cleaners. Use a damp cloth for         display cleansers. Do not apply the cleaner directly on the product.•       accessories.• • Do not expose the product to dripping or splashing          • Please leave at least 5 cm of free space between the product and walls or other furnitures for ventilation purposes.•         power source on its rating plate. For further •       please do not make any change on the grounding plug. Always use earthed socket outlet for product.• Please provide the plug and socket to supply the needed power for appliance.
English - 3 -• Do not shake the product. Ensure that it stays in a balanced stance on its position.• Do not throw or drop any object on your product. • Do not interfere on your products screen or any other surface with a sharp object. • Do not keep your product in a humid environment.• Do not keep your product in an extremely cold environment. • Do not keep your product in an extremely hot environment.• surfaces.•   animals.Vent holes of the productThe vent holes are designed to provide the product to work constantly and prevent it from overheat. Do not block these openings in anyway. For the same   Never insert an object into the product through vents inserting any objects in the vents or openings of the spill water or liquid on the product.RepairUnless a basic implementation on the product is you may risk your health or your product. In case of • When the cable is worn off or harmed.• If the product has been dropped or the cabinet has been damaged.• If the performance of the product is changed or the appliance needs to be repaired.• When a liquid was spilled on the product or when objects have fallen into the product.• When the product has been exposed to rain or water.• When the product does not operate properly as described in the operating instructions.Replacement partssure that the service person uses replacement parts characteristics and performance as the original parts. shock and/or other danger.Safety checksservice technician to perform safety checks to ensure that the product is in proper operating condition.Wall mountingthe product according to the method recommended by the manufacturer.• Read the instructions before mounting the product on the wall.• The wall mount kit is optional. You can obtain from • Do not install the product on a ceiling or on an inclined wall.• accessories.• the product from fall. Do not over-tighten the screws.Power Cord• The power cord is used to disconnect the product from the mains and therefore it must remain readily operable. If the product is not disconnected power for all situations even if the product is in standby mode or switched off.• Use only the power cord supplied with the monitor.• Do not damage the power cord nor place heavy    • on the plug. Do not pull from the cable when unplugging the appliance.• Do not use the power cord with a power tap. Adding           overheating.• Do not remove or insert the power plug with wet hands. Doing so could result in electric shock.• Unplug the power cord if it is not used for a long time.• Do not attempt to repair the power cord if it is broken or malfunctioning. When damaged it must personnel.Especially for child safety•          monitor.•        easily be used as steps.• Remember that children can become excited while monitor. Care should be taken to place or install the
English - 4 -Foreseeable misuse and incorrect use• or aircraft or at altitudes exceeding 2000m above sea other than mentioned in user manual additional requirements may be necessary.CAUTIONDo not leave a static image displayed for pro-longed period of time. If a static image is displayed may cause image sticking on the display. This con--erable amount of operational display time to dissi- 120 minutes of continuous motion display will elim-inate most image sticking effects at normal room temperature (not lower than 10 C).-fect the performance of the computer and are not accepted as a defect. WarningThis is a class A. In a domestic environment this may cause radio interference in which case the user may be required to take adequate measures.BATTERY SAFETY GUIDELINES       dependable source of portable power. Problems can occur if they are misused or abused resulting in Here are some simple guidelines to safe battery use designed to eliminate any such problems.• plus and minus marks on the battery and appliance.       • care not to mix old and new batteries or batteries of • Store unused batteries in their packaging and away from metal objects which may cause a short-circuit         even an explosion.• Remove dead batteries from equipment and all batteries from equipment you know you are not going knocked down.• Care should be taken to route all cords and cables connected to the monitor so that they cannot be pulled or grabbed by curious children.ConnectionsBe sure to turn off the main power switch and disconnect the plug from the power outlet before    manual of the equipment to be connected.Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables connected to the input and output terminals may cause malfunctions and other problems.Positioning  by taking simple pre-cautions such as:• Using fixing devices like wall mount brackets recommended or supplied by the manufacturer.• Educating children about the dangers of climbing on furniture to reach the monitor or its controls. If your same considerations as above should be appliedTransport and Shipping• Your device must be kept in its original package to protect from damage to its accessories during transport and shipping.• Keep the product in normal position during transport.• Do not drop the device during transport and protect it against impacts.• Damages and faults that occur during transport after the delivery of the appliance to the customer are not included in the warranty cover.•     personnel.Intended Use• This product is intended to be used in public places but are also suitable for household and similar general use.• Product is only suitable for connecting commercial mains socket outlets. Do not connect product industrial socket outlets.
English - 5 -to use for a long time. Otherwise the batteries may leak and cause damage.• Batteries must not be exposed to excessive heat • explode. Please recycle dead batteries; do not put with the normal household waste.• in a charger or by applying heat to them. They may rechargeable batteries which are clearly marked as such.• Supervise children if they are replacing batteries themselves in order to ensure these guidelines are followed.• • This product or the accessories supplied with the product may contain a coin/button cell battery. If the severe internal burns in just 2 hours and can lead to death.• Remember that small button cell batteries such as and this can be dangerous.• • Make sure battery compartments are secure. If the •             • rinse immediately and thoroughly. If it gets into your    seek medical treatment immediately. Leaked battery          cause a skin irritation or damage your eye.CAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.Markings on the ProductThe following symbols are used on the product as a marker for restrictions and precautions and safety      such information for security reasons.Class II Equipment: This appliance is designed in such a way that it does not require a safety connection to electrical earth.Class II Equipment With Functional Earthing: This appliance is designed in such a way that it does not require a safety used for functional purposes.Protective Earth Connection: The marked terminal is intended for connection of the protective earthing conductor associated with the supply wiring.Hazardous Live Terminal: The marked terminal(s) is/are hazardous live under normal operating conditions.Caution, See Operating Instructions: The marked area(s) contain(s) user replaceable coin or button cell batteries.Any issues which are caused by customer mis-adjustment of any software including the operating system are not covered by the warranty.Depending on the model you buy, the actual appearance of the product may differ from the images used in this manual.i
English - 6 -General ViewFront Side211. LCD Panel2. Brand - LogoRear Side (1)1. VGA2. RS2323. HDMI 14. 5. 6. HDMI 27. Headphone8. USB (2.0)9. USB (3.0) 10. IR Input11. HDMI Out12. Internal USB Compartment 123468791011125
English - 7 -Rear Side (2)1. Audio Out2. Audio In3. Ethernet4. RJ12 (service use only)5. 6. YPbPr7. 1347265To turn on the Display: Press the will turn on.To turn the Display off: Press the centre of the joystick in and hold it will turn into standby mode.To change source: Press the centre appear on the screen. Scroll through the available sources by pushing the joystick up or down.To change volume: Increase the volume by pushing the joystick right. Decrease the volume by pushing the joystick left.Note: Main menu OSD cannot be displayed via joystick.V+ V-
English - 8 -Turning the Display On/OffPress the Standby button on the remote or on rear left side of the Display to switch it on from standby or to switch it into standby mode.V+ V-LED Status Status of the monitorPower LED not lit Power onPower LED lit Power off (Standby mode) Scheduler active Power up/down and software update
English - 9 -Remote Control19202224262729765432110111213151617892823142118253031Inserting the Batteries into the RemoteRemove the screw that secure the battery compartment cover            gently. Insert two AAA batteries. Make sure the (+) and (-) signs match (observe correct polarity). Place the cover back on. Then screw the cover back on again.1. Standby: Switches On / Off the Display2. Numeric buttons: Enters a number or a letter in the text box on the screen.3. Signage: Displays Signage Settings menu4. Volume +/-: Increases or decreases the volume5. CMS: Opens the predefined Start url (in Signage Settings>Link options menu). Press and hold 3 Settings url (in Signage Settings>Link options menu).6. Menu: Displays the main menu7. Directional buttons:8. Exit: Closes and exits from displayed menus or returns to previous screen9. Network: Displays Network/Internet Settings menu10. Sound: Displays Sound Settings menu11. Coloured Buttons: Follow the on-screen instructions for coloured button functions12. Picture Mode: Cycles between picture modes13. Rapid reverse: Moves frames backwards in media such as movies14. Pause: Pauses the media being played15. Media browser: Opens the media browsing screen16. Play: Starts to play selected media17. Stop: Stops the media being played18. Rapid advance: Moves frames forward in media such as movies19. No function 20. Info: Displays information about on-screen content21. Video Wall: Displays Video Wall Settings menu22. Picture: Displays Picture Settings menu23. Internet:Open browser initial page (in Signage Settings>Link options menu).24. Wireless Display: Opens the wireless display connection screen25. Back/Return: Returns to previous screen26. OK: 27. Quick Menu: Displays a list of menus for quick access28. No function29. Mute: Completely turns off the volume of the Display30. Screen: Changes the aspect ratio of the screen31. Source: Shows all available content sources
English - 10 -First Time Installation        selection screen will be displayed. Select the desired language and press OK.press OK to continue. For some Country0000      number combination. You have to enter this PIN if you are asked to enter a PIN for any menu operation later.The Signage Settings menu will be displayed next. Set ID OSD Orientation Auto software update        Model nameSerial number and Software version options are for information only. They will be grayed out and not selectable. Refer to the Signage Settings Menu Contents section for more information on the options of this menu. While this menu is displayed on the screen you can copy USB device to the Display by pressing the Yellow button. You can also save the model information data of the Display to a connected USB device by pressing the Blue     press OK to continue.Network/Internet Settings menu will be displayed. Please refer to        OK button          anything press the Rapid advance button.The First Time Installation is completed.To repeat this process and reset the Display's settings to the factory defaults enter the Signage Settings   First time installation and press OK. You will be asked to enter the PIN that you have First Time Installation. If the correct PIN asking whether you want to delete all settings and reset the Display. Select Yes and press OK Note:   installation. Note that, some options may not be available depending on the country selection.Media Playback via USB InputNote: If internal USB device (*) is inserted and external device is also inserted, media player will use the external device only.power supply) external hard disk drives or USB memory stick to your Display by using the USB input/s of the Display.IMPORTANT! Back up the files on your storage devices before connecting them to the Display. Manufacturer will not be responsible for any file damage or data loss. Certain types of USB devices (e.g. MP3 Players) or USB hard disk drives/memory sticks may not be compatible with this Display. The Display supports FAT32 and NTFS disk formatting.Wait a little while before each plugging and unplugging so may cause physical damage to the USB player and the USB device itself. Do not pull out your drive         input/s. External power supplied USB hubs are recommended in such a case. Note:Media Browser menu USB device.Media Browser Menua USB disk by connecting it to your Display. Connect a USB disk to one of the USB inputs located on the side of the Display. Pressing the Menu button while in the Media Browser mode will access the PictureSound and Settings menu options. Pressing the Menu button again will exit from this screen. You can set your Media Browser preferences by using the Settings menu.Start playback with the Play button and activate -uously played in original orderStart playback with the OK but-ton and activate The same file will be played continuously (repeat)Start playback with the Play button and activate once in random orderStart playback with the Play button and activate        -tinuously played in the same random order.USB Auto Play FeatureUSB AutoPlay feature is to start playing the media       the Media Browser. The media content types have different priorities in order to be played. The reducing        content and as last Audio.This feature will only work if all of the following cir-cumstances occur:• The USB device is plugged in.• Auto Play option is enabled. It is placed in the Media Browser>Settings menu.
English - 11 -Failover FeatureIf No Signal option in the Signage Settings menu is set as Failover the Display checks the connected and the Display will turn itself off after a period of 5 No Signal OSD will be displayed on the screen and the Display will turn itself off after a period of 5 minutes.Note: The setting of the Auto Play option in the Media  menu is not important, in Failover mode it will function anyway.CEC and CEC RC PassthroughThis function allows to control the CEC-enabled using the remote control of the Display.The CEC option in the System>Settings>More menu should be set as EnabledSource button and select the HDMI input of the connected CEC device from the Sources List menu. When in source menu with its own name instead of the       Recorder 1 etc.).The Display remote is automatically able to perform the main functions after the connected HDMI source has been selected.To terminate this operation and control the Display Quick Menu button        CEC RC Passthrough and set as Off by pressing Left or Right button. If the Quick Menu button is not available press 3 seconds. This feature(CEC) can also be enabled or disabled under the System>Settings>More menu.The Display supports also ARC(Audio Return Channel) feature. This feature is an audio link meant to replace other cables between the Display and the audio system (A/V receiver or speaker system).audio outputs automatically. So you need to decrease audio from connected audio device only (same as other optical or co-axial digital audio outputs). If you should select that device from the source list. In that case volume control keys are directed to connected audio device.Note: ARC is supported only via the HDMI1 input.System Audio ControlDisplay. The volume can be controlled using the remote control of the Display. To activate this feature set the Speakers option in the System>Settings>More menu as . The Display speakers will be muted and the sound of the watched source will be provided from the connected sound system.Note: The audio device should support System Audio Control feature and CEC option should be set as .Usage of the Start URL• of any USB storage device. Make sure that the •          Notepad.• • Connect the USB strorage device to the Display. Highlight USB Operations option in the Signage Settings menu and press OK.• Switch the Display off and then switch it on again.Note: You can check if the Start URL have the desired link from the  menu.
English - 12 -Display Menu ContentsSystem - Picture Menu ContentsMode You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: TextGameSportsSignage and Natural.ContrastAdjusts the light and dark values on the screen.BrightnessAdjusts the brightness values on the screen.SharpnessSets the sharpness value for the objects displayed on the screen.ColourEnergy SavingFor setting the Energy Saving to CustomMinimumMediumMaximumAutoScreen Off or Off. Note: Available options may differ depending on the selected Mode.Backlight This setting controls the backlight level. The backlight function will be inactive if the Energy Saving is set to an option other then Custom.Advanced SettingsDynamic ContrastYou can change the dynamic contrast ratio to desired value.Noise Reduction Noise Reduction setting to reduce the amount of noise.Colour Temp Sets the desired colour temperature value. Cool (1300K)Normal (9300K) and Warm (8500K) options are available.Picture Zoom Sets the desired image size format.Movie SensePress left/right buttons to set Movie Sense to LowMediumHigh or Off. While Movie Sense quality and readability. When Movie Sense option is set to LowMedium or HighMovie Sense demo option will be available. If one of these options is selected and if you press OK settings for Display screen.Note: This feature may not be available depending on the model of your unit.Film Mode Films are recorded at a different number of frames per second. Turn this feature on when you are RGB Gain adjustment of white balance in the picture.HDMI Full Range enhance blackness in the picture.PC Position Appears only when the input source is set to VGA/PC.Autoposition Automatically optimizes the display. Press OK to optimize.H Position This item shifts the image horizontally to the right hand side or left hand side of the screen.V Position This item shifts the image vertically towards the top or bottom of the screen.Dot Clock Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.Phase Depending on the input source(computer etc.) you may see a hazy or noisy picture on the screen. You can use phase to get a clearer picture by trial and error.Reset Resets the picture settings to factory default settings (except Game mode).While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture  while in PC mode.
English - 13 -System - Sound Menu ContentsVolume Adjusts the volume level.EqualizerSelects the equalizer mode. Custom settings can be made only when in User mode.Balance Adjusts whether the sound comes from the left or right speaker.HeadphoneSets headphone volume.Please ensure before using headphones that the headphone volume is set to a low           Headphone/Lineout option is set to Headphone.Audio Link Press OK to open the Audio Link menu screen. Using this screen you can discover and connect the sound devices to your Display wirelessly.AVL (Automatic Volume Limiting) Headphone/Lineoutcan select this option as Lineoutset this option as Headphone.Please ensure before using headphones that this menu item is set to Headphone. If it is set to Lineoutwhich could damage your hearing.Digital Out Sets digital out audio type. PCM and Compressed options are available.Bass Gain Controls the bass gain level. Use Left or Right button to set.Note: This feature may not be available depending on the model of your unit.System - Settings Menu ContentsLanguageSets the OSD menu language preference. Date/Time Sets date and time.Sources Enables or disables selected source options.Network/Internet Settings Displays network/internet settings.More Displays other setting options of the Display.Menu TimeoutChanges timeout duration for menu screens.Standby Led Enables or disables the functionality of the standby led. If disabled the led will not function.Software upgradeOK to see the menu options.Application VersionDisplays current software version.Auto Display OFFSets the desired time for the Display to automatically go into standby mode when not being operated. Audio Video SharingAudio Video Sharingyou can share/play photos on your Display. See instructions of your sharing software for more information. Audio Video Sharing mode will not be available with internet portal feature.Power Up Mode Last State, Always On and Standby options are available.CEC With this setting you can enable and disable CEC functionality completely. Press Left or Right button to enable or disable the feature.CEC Auto Power OnThis function allows the connected HDMI-CEC compatible device to turn on the Display and switch to its input source automatically. Press Left or Right button to enable or disable the feature.
English - 14 -SpeakersTo hear the Display audio from the connected compatible audio device set as . You can use the remote control of the Display to control the volume of the audio device.DP Stream Setting (*) Sets the DisplayPort stream type. MST and SST options are available.(*) This menu item appears only when the input source is set to DP.Smart Remote Press OK to open the Smart Remote menu screen. Using this screen you can discover and connect the remote controller devices to your Display wirelessly.If this feature is enabled the Display can be turned on again commands if it is turned off through it. Press Left or Right button to enable or disable the feature.Signage Settings Menu ContentsSet ID Sets the device ID. You can select a value between 0-100 using the numeric buttons on the remote in order to identify your Display.OSD Orientation Sets the OSD (On Screen Display) rotation of your Display. Landscape and Portrait options are available.Software upgradeDisplays current software version. Press OK to see the Upgrade options menu. You can use these options to start a manual search for software updates and set your automatic scan preference.Serial number Displays serial number of the unit. (Cannot changed by user)Model name Displays model name of the unit. (Cannot changed by user)Save model information Copies the model information data of the unit to a connected USB device.Clone to USB Clone from USBInternal USB operationsconnected.Video Wall Settings Press OK to open the Video Wall Settings menu screen. Row Count, Column Count, Cell and Offset options are available.Power Up Mode Last state, Always on and Standby options are available.Quick StandyIf this feature is enabled the Display can be turned on again commands if it is turned off through it. Press Left or Right button to enable or disable the feature.OPS SettingsPress OK to open the OPS Settings menu screen. Three sub-menu options are available.Displays read-only information about the OPS unit, if supported. Displays whether the OPS module is on or off. Allows the change of status via soft PSON signal (0.5s) Turns the OPS off via hard PSON signal (5s)Note: This menu will not be available if OPS is not supported or not connected to the unit.Copy app cache from USBCopies app cache data from a connected USB device to the unit.Note: This feature may not be available depending on the model of your unit.Scheduler SettingsPress OK to open the Scheduler Settings menu screen. Set the Scheduler option as On by using the Left/Right directional buttons. Using the sub-menu options you setting. It can also be set to turn off . If the Source option is set as Last StateSource option is set as USBas explained in the section entitled ‘USB Auto Play Feature.
English - 15 -Link optionsPress OK to open the Link Options menu screen. Current Start url and Settings url links will be displayed. These items are for information only and not selectable. Open browser initial page and NTP serverrelated options.Pixel shiftEnables or disables pixel shifting. This option can be used to avoid image retention (after USB InformationPress OK to open the USB information menu screen. Current Total space and Free space informations of the connected USB device will be displayed. You can also format the connected USB device using the Format Disk option in this menu (FAT32 format only). Power on Delay Sets a delay value at power on. This value can be set from 0 to 2000 ms in steps of 100 ms. The Display will turn on after the set delay time is expired.USB operationsHighlight and press OK to perform USB operations.No Signalset input source. Failover and Input Search options are available. Signal OSD will be displayed on the screen. The setting of the Auto Play option in the Media Browser>SettingsIf Input Search is selected the Display will search all available input sources consecutively be displayed and the Display will turn itself off after a period of 30 seconds.No signal Power offreceived from the selected source. This feature will only work if all of the following circumstances occur:- No Signal option is set as Failover. - USB device is not connected to the Display / USB device is connected but there are Auto launch CMS(Start url)Open Browser(Open Browser initial page) and Disabled options are available.Last Status Set as On to enable the Display to reopen with the closing status. Panel Lock Set as Off to prohibit the use of the buttons on the Display.RCU InhibitSet as On to inhibit the use of the remote. Remote control will function in Stand-By mode independently from the setting of this option. If this option is set as Limited only functional. Volume Settings Press OK to see available menu options.USB OptionSet as Off to disable the USB ports on the Display. You can also set this option as 5V to provide 5 volts power over USB. In this case it will still not be available to browse the USB content via Media Browser feature of the Display.Boot Up Picture mode Off the last set picture mode will be used at power on.UART 0Select ASCII/HEX protocol for UART 0. Default value is ASCII. There is no need to restart the Display after selection in order to work with the protocols correctly. If the the Display is booted up.Note that ASCII/HEX selection is not working while debug logs are enabled. If it is reboot the Display in order to correct the debug logs and the ASCII protocol behaviour.Also note that HEX protocol will work with the baud rate value 19200 for UART0
English - 16 -UART 1Select ASCII/HEX protocol for UART 1. Default value is HEX. There is no need to restart the Display after selection in order to work with the protocols correctly. If the the Display is booted up.Note that ASCII/HEX selection is always working as expected. It does not matter if the debug logs are enabled or not.Also note that HEX protocol will work with the baud rate value 9600 for UART1TV Live TimeDisplays the duration of life of the unit.Reset to Default Values Highlight this option and press the OK button on the remote to return the Display to default settings.First time installationHighlight and press OK to perform First Time Installation and reset all settings to factory settings. You will need to enter the correct PIN to carry out this operation.Note: process.
English - 17 -Connectivityto the     System>Settings menu.Wired ConnectivityTo Connect to a Wired Network• You must have a modem/router connected to an • Broadband ISP connectionLAN (ethernet) cableLAN input on the rear side of the DisplayNetwork TypeThe Network Type can be selected as Wired Device, Wireless Device or Disabled  active connection to the Display. Select this as Wired Device if you are connecting via an ethernet.Internet Speed Test Internet Speed Test and press the OK       Advanced SettingsAdvanced  and press the OK but-ton. On the next screen you can change the IP and from  to Manual. Now you can enter the Manual IP and / or Manual DNS values. Select the          Press the OKWireless Connectivity To Connect to a Wireless NetworkThe Display cannot connect to the networks with a hidden SSID (wireless network name). To make your Broadband ISP connection• A Wireless-N router (IEEE 802.11a/b/g/n) with simultaneous 2.4 and 5 GHz bands is designed to increase bandwidth. These are optimized for       transfers and wireless gaming.•       the area.•                  • •         •   Open the  menu and select Network Type as process.Note: If the modem supports N mode, you should set N mode settings.
English - 18 -             buttons and the OK button on the remote control.              Network Type as .you can directly connect your Display to the modem/router without entering a password or adding the  Highlight the router option and press the OK button. Then press the WPS button on your router/modem to connect.Internet Speed Test and press the OK button       Advanced and press the OK button to open buttons to set. Press the OKwhen complete. Other Information        Connected or Not Connected and the current IP •    • •          • • Enter the   menu and the playback  OK •        controller application from the server of your mobile device application provider. Note: This feature may not be supported on all mobile devices.Wireless DisplayWireless Display is a standard for streaming video and sound content by Wi-Fi Alliance. This feature provides the ability to use your Display as wireless display device.Using with mobile devicesThere are different standards which enable sharing of between your mobile device and Display.Then press the Source button on the remote and switch to Wireless Display source. A screen appears stating that the Display is ready for connection.Open the sharing application on your mobile device. These applications are named differently for each mobile device for detailed information.Scan for devices. After you select your Display and on your Display.Note: This feature can be used only if the mobile device supports this feature. Scanning and connecting processes differ according to the programme you use. Android based mobile devices should have the software version V4.2.2 and above.Connecting Other Wireless DevicesYour Display supports another short range wireless connection technology too. A pairing is required before using these kind of wireless devices with the Display set. You should do the followings to pair your device with the Display:• Set the device to pairing mode• Start device discovery on the DisplayNote: Refer to the user manual of the wireless device to learn how to set the device to pairing mode.You can connect audio devices or remote controllers wirelessly to your Display. Unplug or switch off any other connected audio device in order for wireless connection feature to work correctly. For audio devices you should use the Audio Link option in the System>Sound     Smart Remote option in the System>Settings>More menu. Select the menu option and press the OK button to open the related menu. Using this menu you can discover and connect the devices that use the same wireless technology and start to use them. Follow the on-screen instructions. Start the device discovery. A list of available wireless devices will be displayed. Select the device you want to connect from the list and press the OKDevice connected     is successfully established. If the connection fails try it again.Note: Wireless devices may operate within the same radio frequency range and may interfere with one another. To improve the performance of your wireless device place it at least 1 meter away from any other wireless devices.
English - 19 -Connectivity TroubleshootingWireless Network Not Available• Display wireless connection. •  menu screen.using the wired network in your home. Refer to the Wired Connectivity section for more information on the process.              Connection is Slow             Distruption during playback or slow reactionsYou could try the following in such a case:Keep at least three meters distance from microwave       other Wi-Fi compatible devices. Try changing the active channel on the WLAN router.                                                                     Invalid Domain Ensure that you have already logged on to your PC              Using Audio Video Sharing Network Service       your home network.       with the Nero Media Home programme. For more Nero Media Home InstallationSee the Wired/Wireless Connectivity chapters for Select Media Browser by using the directional buttons from the main menu and press OK. The media browser will then be displayed. Audio Video SharingSelect the desired media type on the main media browser menu and press OK   Device Selection screen will be displayed after selecting the desired media type. If   this screen. Select media server or network that you want to connect to using the Up or Down buttons and press OKthe Green button. You can press Menu to exit. If you select the media type as Videos and choose a device from the selection menu. Then select the back to main Media Browser screen and select the media type as desired and then perform the network selection again. Or press the Blue button to switch to next media type quickly without changing the network. Refer to the Media Browser menu section for further your display off at the wall socket and back on again. 
English - 20 -other devices like computers.Note: There may be some PC’s which may not be able to and security settings (such as business PC’s).For best home network streaming with this Display, the Nero software should be installed.Nero MediaHome Installation      follows:Note:                  1. Enter the link below completely in the adress-bar of your web browser.http://www.nero.com/mediahome-tv2. Click the Download button on the opening page. PC. 3.              4.             5. Click the Install6. Click the Next         Please read the license agreement carefully and select the appropriate check box if you agree to the terms of the agreement. Installation is not possible without this agreement.7. Click the Next button. On the next screen you can set your installation preferences.8. Click the Install         9. Click the Finish button. The installation is completed. You will be directed to the web site of the nero software.10. A shortcut is now placed on your desktop.    Run Nero MediaHome by double clicking on the shortcut icon.Internet BrowserTo use the internet browser enter the main menu Menu botton. Then launch the Internet Browser application from the Internet menu. You can also press the Internet button on the remote to open the internet browser.(*) The appearance of the internet browser logo may changebe displayed as Speed Dial options along with the Edit Speed Dial and the Add to Speed Dial options. If the Open browser initial page URL in the Signage Settings>Link Optionswill open on this page.       buttons on the remote or a connected mouse. To see the page. HistoryTabs and Bookmarks options and Speed Dial and the Opera buttons are available.To add a desired website to the Speed Dial list for The browser bar will appear. Highlight the Speed Dial - button and press the OK button. Then select Add to Speed Dial option and press the OK button. Fill in the blanks for Name and AddressOK and press the OK button to add. Whilst you are on the site you wish to add to the Speed Dialthe Opera- button and press the OK button. Then highlight Add to Speed Dial option in the submenu and press the OK button again. Name and Address visiting. Highlight OK and press the OK button to add.You can also use the Opera menu options to manage the browser. Highlight the Opera- button and press the OK       general options.There are various ways to search or visit websites using the web browser. Enter the address of a website(URL) into the search/address bar and highlight the Submit button on the virtual keyboard and press the OK button to visit the site. Enter keyword/s into the search/address bar and highlight the Submit button on the virtual keyboard and press the OK button to start a search for the related websites. Highlight a Speed Dial thumbnail and press the OK button to visit the related website.
English - 21 -Your Display is compatible with USB keyboard/mice. Plug your device into the USB input of your Display for easier and quicker navigation.supported by the browser.Your Display does not support any download processes from the internet via the browser.All sites on the internet might not be supportted. According to the site; content problems may occur. In some circumstances video contents might not be able to be played.Internal USB OperationsYour Display has an internal memory. There are 4 operations available that can be performed with the internal memory: Copy From USBCopy To USBDelete and Format Disk (FAT32 only).These options can be found in the Signage Settings>Internal USB operations menu. The internal memory of your Display has a default   int_usb    Copy From/To USB operations are performed using this folder. If you want to copy data from an external USB storage device to the internal memory of your copy_to_int_usbof the external USB storage device. If you want to copy data from the internal memory of your Display copy_from_int_usbdirectory of the external USB storage device.Copy From/To USB operations will only be available if a USB storage device is connected to your Display. Delete and Format Diskeven if no USB storage device is connected. The  int_usb       internal memory will be automatically recreated after each time Delete and Format Disk operations are performed.OSD Rotation Support (*)You can change the OSD (On Screen Display) rotation of your Display if desired. While performing First time installation set the OSD Orientation option as desired when the Signage Settings menu is dis-played. You can also change this setting later from the Signage Settings menu. Available options are: Landscape and Portrait.(*) This feature may not be available depending on the model of your DisplayDisplayPortDisplayPort version 1.2 is supported via the Display-Port input and output connectors on your Display.DP Streaming Setting option in the System>Set-tings>More menu is set as MST(Multi-Stream Trans-port) by default. If a MST compliant source device is If DisplayPort version 1.1 compliant or SST (Single-Stream Transport) compliant source device with DisplayPort version 1.2 support is connected to the in all connected Displays.To be able to stream the same image to all connected DP Streaming Setting option in the System>Settings>More menu should be set as SST.The maximum amount of the Displays that can be connected by using daisy-chaining function may differ capable of supporting this operation. Note:for connection. In SST operation mode the total amount of the Displays is limited (a maximum of 7 units) due to HDCP encryption. If the signal is stable and there is no cable loss, there will be no limitation in case the source content is not HDCP-encrypted.HDMI OutThe HDMI2 port located on the rear left side of the Display functions as an output port (upper HDMI port). devices should be connected to this port. Only the content received from the HDMI1 input port located also on the rear left side of the Display (lower HDMI port) can be outputted from this port. The contents         function and you can not disable/enable through any menu option. HDMI output port will always function if a source device is connected to the HDMI input.
English - 22 -RS-232Input SocketTo COM portRS-232 to USB AdaptorPCYou can control the product from an external PC via RS-232 (COM port) or LAN (Ethernet port) on the RS-232 from remote computer. When a command is according to the received command and sends a response message to the PC.Equipment/Tools:• RS-232 (female) to RS-232(male) cable or LAN cable (connected via router)• USB to RS-232(male) cable• Notebook or PC which has USB or LAN port• Installed program on remote PC to send commands:       operating the implemented functions via serial port and utility. A suitable utility can be used such as described below. Connecting to the Display (LAN port)Download and install the PuTTY software from the Host Name1986PortTelnetConnection type and click the Open button.Note: Refer to the section of this manual for information on connecting the Display to a network and displaying the IP address of the Display.Use the commands in the RS232 Command Table.current volume level should be displayed on the putty window as shown in the pictures below.Another example;      the changes from the Display.The last example ;source should be displayed on the putty window as shown in the picture below.Connecting to the Display (RS232 port)Run the software and select Serial as Connection Type        Serial Line (in the following example it is COM4) 115200Speed. Then click the Open button.
English - 23 -
English - 24 -RS232/LAN Command TableAUDIO COMMANDSCommand Description Parameter ReturnGETVOLUME Volume level information. no parameter #*volume level is …HEADPHONEVOLUME "Set headphone volume level."  #*set headphone volume to nGETHEADPHONEVOLUME "Headphone volume level information." no parameter #*headphone volume is …GETMUTE Get mute value on/off. no parameter"#*MUTE OFF or #*MUTE ON"SETMUTE Set mute value on/off. no parameter"#*MUTE OFF or #*MUTE ON"SETSOUNDMODE"Set sound mode. SETEQUSERFREQ 100Hz 10"   right)""#*setSoundMode() set to n or #*Invalid sound mode entered"SETBALANCE Set balance value. integer n (-50 < n < 50)"#*set balance level to n or #*invalid balance level entered"GETBALANCE Get balance value. no parameter #*balance level is …SETAVL Set AVL state.  #*set avl state to nGETAVL Get AVL state. no parameter #*avl state is …SETDYNAMICBASS Set dynamic bass state.  #*set dynamic bass state to nSETEQUSERFREQ Set equalizer user freq. value for any band.  integer n -13 < n < 13 Example: SETEQUSERFREQ 120Hz 10""#*setEQUserFreq() set to n or #*Incorrect sound system parameter entered or #*Incorrect equalizer mode. It should be USER mode"GETDIGITALOUT Get digital out. no parameter #*digital out is pcm or #*digital out is compressedSETEQMODE Set equalizer mode. "#*setEQMode() set to n or #*Incorrect equalizer parameter entered"SETDIGITALOUT Set digital out. #*setDigitalOut() set to n OR #*Incorrect digital out mode parameter enteredVOLUMEUP"Inrease Volume Level by 1 step (Until max volume) "no parameter"#*volume LEVEL is increased to ... or #*You can NOT increase volume Volume Level is …"VOLUMEDOWN Decrease Volume Level by 1 step no parameter"#*volume LEVEL is decreased to .. or #*You can NOT decrease volume LEVEL further. Current Volume level is ... "
English - 25 -SETHEADPHONEOUTPUT Set headphone output "#*set headphone output to n or #*Invalid Parameter"GETHEADPHONEOUTPUT Get headphone output no parameter #*LINEOUT or #*HEADPHONEGETDYNAMICBASS Get dynamic bass state. no parameter #*the dynamic bass state is ... GETBASSGAIN Get bass gain no parameter "#*the bass gain level is n Note: Above n is -6 <= n <= 6"GETEQUSERFREQ Get equalizer user freq. "#*the equalizer value for the band is n or #*Incorrect sound system parameter entered Note: Above n is -13 < n < 13"GETEQMODE Get equalizer mode no parameter"#*the equalizer mode is n User"SOUNDRESET Reset sound settings no parameter"#*Fixed Volume is set to ... #*Fixed volume availability is set to ... #*Headphone volume control availability is set to ... #*Start volume availability is set to ... #*Start volume limit is set to ... #*Start headphone volume limit is set to ... #*Lower volume limit is set to ... #*Upper volume limit is set to ... #*Headphone volume limit is set to ... #*Wakeup time volume is set to ... #*All equalizer bands are set to ... #*Volume is set to ... #*Headphone volume is set to ... #*Headphone balance is set to ... #*Headphone bass is set to ... #*Headphone treble is set to ... #*Digital audio out is set to ... #*Audio output description path is set to ... #*Audio description is ... #*Audio description relative volume is set to ... #*Audio description language is set to ... #*Sound Loudness is set to ... #*Sound mode digital is set to ... #*Sound mode is set to ... #*Sound subwoofer is set to ... #*SPDIF out is ... #*DTS is ... #*Bass gain is set to .. or #*Dynamic bass is ... "
English - 26 -BROWSER COMMANDSCommand Description Parameter ReturnOPENURLStarts the given URL and returns web page load status directly.string-integer n <load url='n' />#*status= ... url=nGETURL Gets URL of the current page if the portal is active.no parameter #*URL : ...GETUSERAGENT Gets portal user agent. no parameter #*Current UA : ...GETCURSORPOSITION Gets cursor position in the browser.no parameter #*X: ... Y: ...SETCURSORPOSITION Sets cursor position in the browser. #*X: a Y: bSETSETTINGSURL Sets the settings URL string #*Setting URL is setGETSETTINGSURL Gets the settings URL no parameter #*Setting URL is ...SETSTARTURL Sets the start URL string #*Start URL is setGETSTARTURL Gets the start URL no parameter #*Start URL is ...GENERAL DISPLAY COMMANDSCommand Description Parameter ReturnSETRC Enables/disables remote control commands.= OFF)set remote state On or set remote state OFFSETSOURCE Set source as enable/disable. "#*Selected source n #*Enable/Disable state : b"GETSOURCE Gets source. no parameter #*source is ...GETCOUNTRY Get country in channels state. no parameter #*COUNTRY IS : ...GETSWVERSION Returns the software version of tv. no parameter #*V...KEY Send key to Eclipse......ext.)n key send to EclipseRESET Reset the device. no parameterReset process was successfully accomplished. You need to establish the connection again.
English - 27 -STANDBY"Switch box to Standby mode. ( Attention: Television cannot be opened with standby command. You should open it with remote control. If you use STANDBY need to establish the connection again. Tv state :HARD-STANDBY )"no parameter"#*enterLowPowerMode() returns successfully. or #*enterLowPowerMode() returns unsuccessfully! or #*enterStandbyMode() returns successfully. or #*enterStandbyMode() returns unsuccessfully! "MENUTIMEOUT Set menu time out mode. "#*set menu timeout mode to OFF or #*set menu timeout mode to 60 or #*Invalid menu timeout mode "GETMODELNO Get model no. no parameter #*Model no: ...GETSERIALNO Get serial no. no parameter #*Serial no: ...GETLED Get led on/off state. no parameter "#*LED is on #*LED is off"GETRCGet remote control commands enabled statusno parameter"#*remote control commands are on #*remote control commands are off"USBOPERATIONS Perform USB Operations no parameterBank 1 etc. Be sure or observe debug print outs: "MFC ISP: done" will be writen... This may take over 10 minutes.GETMENUTIMEOUT Get menu time out mode no parameter"#*menu timeout mode is OFF #*menu timeout mode is n #*can not get menu timeout mode 60)"GETTVLIFETIME Prints Monitor life time in minutes. no parameter #*Monitor Life Time: nSETPOWERONDELAY Set poweron delay level is calculated as 100ms*n)"#*Poweron delay set to ... Ms #*NACK"GETPOWERONDELAY Get poweron delay level no parameter #*The power on delay is … msSIGNAGERESETSet all items in the signage settings menu to their default values.no parameter #*All signage settings set to default valuesSELECTSOURCESelect source. indexes(some of them are not enabled))20=OPS)" #*select TV source or #*select External source …"KEY standbySwitch box to Standby mode. ( For quick standby)no parameter standby key send to Eclipse
English - 28 -TIME Display the current date and time. no parameter Time = ...GETSTANDBY Get standby on/off. no parameter"#*standby off or #*standby on"STARTFTI Start First Time Installation. no parameter #*FTI was initialising.CHANGELNG Change active language."integer-integer x y x = language type (0 = 4 = Primary Subtitle 7 = Secondary Teletext Language) 36 = Thai) Example: CHANGELNG 0 25 (To set system language to Turkish) ""#*Active language was changed or #*Incorrect item parameter entered"SETCOUNTRY Set country in no channels state.string-integer n( "#* setCountry() set to n or #*Country should be set only in the FTI mode (no channels state)"SETQUICKSTANDBYSETQUICKSTANDBY on).= OFF)"#*Set Quick Standby on or #*Set Quick Standby off or #*Quick Standby is not enabled"GETQUICKSTANDBY Returns Quick Standby state n (on or off) no parameter #*Quick Stanby is nUSBOPERATIONS Perform USB Operations no parameterBank 1 etc. Be sure or observe debug print outs: "MFC ISP: done" will be writen... This may take over 10 minutes.
English - 29 -NETWORK COMMANDSCommand Description Parameter Returnset_IP_address Set static IP address of eth0 network interface.str-int n Example: set_IP_address 192.168.0.15"#*IP address setting Succesfull #*IP address setting NOK"get_IP_addressGet IP address of eth0 network interface. Usage: get_IP_addressno parameter #*IPaddr: ...SETNETWORKTYPEset network type (eg. SETNETWORKTYPE value) (value should 'disabled' as string)'disabled')#*Network type is set to: <network-type>GETNETWORKTYPE get network type (eg. GETNETWORKTYPE) no parameter #*the network type is <network-type>SETSUBNETMASKset subnet mask (subnet mask value should be of format nnn.nnn.nnn.nnn) (eg. SETSUBNETMASK nnn.nnn.nnn.nnn)string "nnn.nnn.nnn.nnn""#*set subnet mask: nnn.nnn.nnn.nnn #*setting subnet mask is failed"GETSUBNETMASK get subnet mask (eg. GETSUBNETMASK) no parameter #*the subnet mask is nnn.nnn.nnn.nnnSETDEFAULTGATEWAYset default gateway (default gateway value should be of format nnn.nnn.nnn.nnn) (eg. SETDEFAULTGATEWAY nnn.nnn.nnn.nnn)string "nnn.nnn.nnn.nnn""#*set default gateway: nnn.nnn.nnn.nnn #*setting default gateway is failed"GETDEFAULTGATEWAY get default gateway (eg. GETDEFAULTGATEWAY) no parameter #*the default gateway is nnn.nnn.nnn.nnnGETDNS1 get DNS server 1 (eg. GETDNS1) no parameter #*DNS server 1 is nnn.nnn.nnn.nnnGETDNS2 get DNS server 2 (eg. GETDNS2) no parameter #*DNS server 1 is nnn.nnn.nnn.nnnINTERNETSPEED start internet speed test no parameter" Speed test is started. Prints ""No internet connection found"" message if fails."VGA/PC COMMANDSCommand Description Parameter ReturnHPOS Set horizontal position. "set horizontal position to ... (percentage in the range) #*invalid value entered"VPOS Set vertical position. "#*set vertical position to ... (percentange in the range) #*invalid value entered"DOTCLOCK Set dot clock. "#*set dot clock to ... (percentange in the range) #*invalid value entered"AUTOPOS Set auto position no parameter #*set auto positionGETOSDORIENTATION Get OSD orientation no parameter #*The OSD orientation ...GETHPOS Get horizontal position. no parameter #*The horizontal position is ...GETVPOS Get vertical position. no parameter #*The vertical position is ...GETDOTCLOCK Get dot clock. no parameter #*The dot clock is ...
English - 30 -SETOPSPOWER Set OPS power status string parameter "on" or "off""#*Turning OPS on #*Turning OPS off #*The OPS is already on #*The OPS if already off #*The OPS is not enabled #*The OPS is not plugged in #*invalid value entered"PICTURE COMMANDSCommand Description Parameter ReturnCOLOURTEMP Set colour temperature. cool) #*setColourTemp() set to nGETPICTUREMODE Get picture mode. no parameter #*Picture Mode is ... for current sourcePICTUREMODE Select picture mode.game)"#*setPictureMode() set to n #*Incorrect picture mode paramater entered"GETCONTRAST Get picture contrast value. no parameter #*THE CONTRAST VALUE : ...SETCONTRAST Set picture contrast value. "#*Picture contrast value is set to n #*Same value is set. Do nothing. #*Incorrect value must between GETBRIGHTNESS Get picture brightness value. no parameter #*THE BRIGHTNESS VALUE : ...SETBRIGHTNESS Set picture brightness value. "#*Picture brightness value is set to n #*Same value is set. Do nothing. #*Incorrect value must between GETSHARPNESS Get picture sharpness value. no parameter #*THE SHARPNESS VALUE : ...SETSHARPNESS Set picture sharpness value. "#*Picture brightness value is set to n #*Same value is set. Do nothing. #*Incorrect value must between GETCOLOUR Get picture colour value. no parameter #*THE COLOUR VALUE : ...SETCOLOUR Set picture colour value. "#*Picture colour value is set to n #*Same value is set. Do nothing. #*Incorrect value must between SETSKINTONE Set picture skin tone value. "#*Picture skin tone value is set to n #*Same value is set. Do nothing. #*Incorrect value must between PICTUREZOOM Set picture zoom mode. #*Incorrect picture zoom mode parameter entered"SETWB Set white balance value."#*White Balance is set to value Invalid value for White Balance (0-255) Invalid type for White Balance"
English - 31 -GETWB Get white balance value.blueoffset)#* type ...SET3DMODESet 3D mode values game)"#*set3DMode() set to n #*Incorrect 3d mode parameter entered"SETVIRTUAL3D Set virtual 3d values. "seMonitorirtual3D() set to n Incorrect virtual 3d mode paramater entered "CONTRASTUP Inrease Contrast Level by 1 step no parameter Picture contrast value is set to …CONTRASTDOWN Decrease Contrast Level by 1 step no parameter Picture contrast value is set to …GETENERGYSAVING Get energy saving mode.  no parameter #*The energy saving mode is ...GETPOWERSAVE Get power save mode no parameter "#*Powersavemode is ON #*Powersavemode is OFF"GETCOLOURTEMP Get colour temperature. no parameter #*Colour temp is ...GETHUE Get picture hue value. no parameter #*Hue level is ...GETSKINTONE Get picture skin tone value. no parameter #*Picture skin tone is ...GETPATTERN Get selected pattern of the Monitor screen no parameter The pattern is ...VIDEO WALL COMMANDSCommand Description Parameter ReturnSETROWCOUNT Set row count.  #*set row count to nGETROWCOUNT Get row count. no parameter #*row count is ...SETCOLUMNCOUNT Set column count.  #*set column count to nGETCOLUMNCOUNT Get column count. no parameter #*column count is ...SETCELL Set cell.  #*set cell to nGETCELL Get cell. no parameter #*cell is ...SETOFFSET Set offset.the number of pixels which will be cropped from all four sides.#*set offset to nGETOFFSET Get offset. no parameter #*offset is ...SETVIDEOWALL Set videowall parameters"parameters for items in following format: RowCount-ColumnCount-Cell-Offset"to …GETVIDEOWALL Get videowall parameters no parameter 
English - 32 -SETALLVIDEOWALL Set all videowall parameters"parameters for items in following format: picture_mode-contrast-brightness-sharpness-color-powesave_mode-backlight_mode-colortemp-zoom_mode-hdmi_trueblack-picture_hue-volume-headphone_volume"#*... ("set to" for each parameter in order)GETALLVIDEOWALL Get all videowall parameters no parameter#*picture_mode-contrast-brightness-sharpness-color-powesave_mode-backlight_mode-colortemp-zoom_mode-hdmi_trueblack-picture_hue-volume-headphone_volume SETPIXELSHIFT Set pixel shift is enabled or not= off)"#*ACK #*NACK"GETPIXELSHIFT Get pixel shift no parameter #*Pixel Shift is ...SETSIGNAGEID Set Signage ID the Signage ID"#*ACK #*NACK"GETSIGNAGEID Get Signage ID no parameter"#*The signage ID is … no signage id is assigned. 0 is the default value.)"MEDIA BROWSER COMMANDSCommand Description Parameter ReturnSETVIEWSTYLE set view style (Flat or Folder)  #*The view style is set to ... (Flat or Folder)GETVIEWSTYLE get view style (Flat or Folder) no parameter #*The view style is ... (Flat or Folder)SETSLIDESHOWINTERVAL set slide show interval #*The slideshow interval is set to ... secondsGETSLIDESHOWINTERVAL get slide show interval no parameter #*The slideshow interval is ... secondsSETUSBAUTOPLAY set usb autoplay mode  #*The USB autoplay is set to ... GETUSBAUTOPLAY get usb autoplay mode no parameter OFF)ADMIN PANEL COMMANDSCommand Description Parameter ReturnRST Restart no parameter #Monitor will be restartedSTVparameter value will ve set for volume levelinteger (volume level) #Volume set level= ...STL Set Monitor Language string-int (please look at abbreviations of languages) #Language changed to ...STWA Stop wake up alarm no parameter #WakeupAlarm stopped !!!STEA Stop emergency alarm none #Emergency Alarm is stopped !!!UNP Send Message"string-int (message text - 0) [message content should be ""word1+ word2+word3 ...""]"#Message Sent in SUCCESS !!! GTSURL Get Monitor Portal URL none #StartUp url is ....
English - 33 -SIGNAGE SETTINGS COMMANDSCommand Description Parameter ReturnGETTOTALSPACE get total usb space (in MB) no parameter #*The total space is ... MBGETFREESPACE get free usb space (in MB) no parameter #*The total space is ... MBSAVEMODELINFOsaves model name and sw version to a removable deviceno parameter#*Model info is savedOR#*No Removable drive is connected(If there is no device connected)SETSCHEDULER enables/disables scheduler  OFF)GETSCHEDULER get scheduler enabled/disabled no parameter SETSCHEDULEOP set scheduler parametersstring n ( on time_off time_source in format: hh:mm_hh:mm_source )#*Schedule parameters are ... (set/not set).GETSCHEDULEOP get scheduler parameters no parameter#*Scheduler on/off time and source is: ......(hh:mm_hh:mm_source)RS232 HEX COMMANDSProtocol Test Steps• 1 connections of the these boards are explained below:1. be tested separately in this type of the board2. RJ12 and DSUB9 both are connected to UART 0. UART 1 is supported for OPS module but not • Activate HEX protocol on TV.a. Enter Signage Settings Menu.b. Change ASCII option to HEX in UART 0 or UART 1 sub-menu item• below:Baud Rate :Parity : NoneData Bits : 8Stop Bits : 1Handshake : None•   All byte values are hexadecimal.Error Responses• NAK reply: 15 • Error reply: 1C 00 00
English - 34 -Maximum Pixel Rates17MB120DSR4  Colour Space  HDMI 4k@60Hz YCbCr4:2:0  445.50MHzOPS 4k@60Hz YCbCr4:2:0  371.25MHzHDMI (DVI opt) 4k@60Hz RGB/YCbCr4:4:4  594MHz(*) Consult your local dealer to get information on the chasis version of your displaySystem FeaturesPanelPanel type PanelResolution 3840x2160 (16:9) -UHDVisual angleHorizontal89°Perpendicular 89°Max. brightnessTyp: 400 cd/m2Max. contrast Typ: 1200 / Min: 900Response time8msH-Frequency 60 KhzV-Frequency67.5 KhzAudio2 x 8 W Audio Output PowerNetwork Connection Ethernet (LAN) for Internet connectivity802.11 a/b/g/n built in WIFI Support (optional)Input/Output Ports 1 x USB 2.0 port (500mA)1 x USB 3.0 port (900mA)1 x Internal USB 2.0 port (500mA)1 x HDMI 2.0 In port1 x VGA port1 x Audio input port1 x Audio output port1 x RS232 port1 x RJ12 port1 x Video In port1 x YPbPr port1 x SPDIF Coaxial Out port1 x DiplayPort v1.2 In1 x DiplayPort v1.2 Out1 x Headphone port1 x IR portPower110-240V AC 50-60Hz 2500mAWeight (kg)36TV Dimensions DxLxH (mm)1684mm x 967mm x 93mmNote: Depending on the model you have bought, some options may not be included with your display.Accessories Included• Remote Control• Batteries: 2 x AAA• Instruction Book• Quick Start Guide• IR Extender• Wall Mount KitFrequency Ranges Max Output Power < 100 mW5150 - 5250 MHz (CH36 - CH48) < 200 mW5250 - 5350 MHz (CH52 - CH64) < 200 mW5470 - 5725 MHz (CH100 - CH140) < 200 mWCountry Restrictions         all EU countries (and other countries following the relevant EU directive) without any limitation except for the countries mentioned below.Country RestrictionBulgaria Allmän auktorisering krävs för utomhus-bruk och offentlig serviceFrance Inomhusanvändning endast för 2454-2 Italy Om det används utanför egna lokaler krävs offentliga tillstånd
English - 35 -Greece Inomhusanvändning endast för 5470 MHz to 5725 MHz-bandLuxembourg Allmän auktorisering krävs för nätverks- och serviceförsörjning (inte för spektrum)Norway Radiosändning är förbjuden för det geo-från centrum av Ny-ÅlesundRussian Feder-ationEndast inomhusThe requirements for any country may change at        local authorities for the current status of their national Information for Users on Disposal of Old Equipment and Batteries[European Union only]Equipment bearing these symbols should not be disposed as general household waste. You should look for appropriate recycling facilities and systems for the disposal of these products.Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead.ProductsBatteryTRADEMARK ACKNOWLEDGMENT              Vesa Wall Mount Measurements Sizes (mm)W H400 200 min. (mm) 7max. (mm) 21 M6 WH
 - 36 -WEABCD DA B C D E               W                   
Regulatory Information USA Changes or modifications not expressly approved by the party responsible for compliance could oid the use’s authoity to opeate the euipet. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Class A device notice NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. RF exposure safety The UHD751-P is a radio transmitter and receiver. It is designed not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission. The antenna must be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Regulatory Information Canada Changes or modifications not expressly approved by the party responsible for compliance could oid the use’s authoity to opeate the euipet. Les changements ou modifications non expressément approuvés par la partie responsable de la conformité pourraient annuler l'autorisation de l'utilisateur d'utiliser l'équipement. This deice coplies ith Idusty Caada’s licece-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RF exposure safety The UHD751-P is a radio transmitter and receiver. It is designed not to exceed the emission limits for exposure to radio frequency (RF) energy set by the ISED. The antenna must be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Le UHD751-P est un émetteur et un récepteur radio. Il est conçu pour ne pas dépasser les limites d'émission pour l'exposition à l'énergie radiofréquence (RF) établie par l'ISDE. L’atee doit tre istall de faço à garder ue distace iiale de 20 cm entre la source de rayonnements et votre corps. L’etteur e doit pas tre colocalis i foctioer cojoiteet avec à autre ateeou autre émetteur. CAN ICES-3 (A)/NMB-3(A) This Class A digital apparatus complies with Canadian ICES-003 Cet appareil numérique de clase A est conforme à la norme Canadienne ICES-003

Navigation menu